[PATCH v3 4/5] ARM: dts: sun8i-h3: Add R_PIO controller node to the dtsi
From: Krzysztof Adamski <hidden>
Date: 2016-02-03 23:34:20
Also in:
linux-arm-kernel, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
Add the corresponding device node for R_PIO on H3 to the dtsi. Support for the controller was added in earlier commit. Signed-off-by: Krzysztof Adamski <redacted> --- arch/arm/boot/dts/sun8i-h3.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index bb37f52..f618a95 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi@@ -517,5 +517,17 @@ compatible = "allwinner,sun6i-a31-clock-reset"; #reset-cells = <1>; }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&apb0_gates 0>; + resets = <&apb0_reset 0>; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; };
--
2.1.4