Re: [PATCH 3/9] dt-bindings: regulator: add Qualcomm LCDB regulator

From
Konrad Dybcio <hidden>
Date
2026-10-15 09:15:03
Also in
dri-devel, linux-arm-msm, linux-devicetree, lkml
Reply to
Dmitry Baryshkov, 2026-10-15
On 10/15/26 10:58 AM, Dmitry Baryshkov wrote:
Several Qualcomm PMICs have an LCDB block providing the positive and
negative bias rails for LCD panels. It is not supported by Linux, so
boards using it either model the rails as dummy fixed regulators and
depend on the state left by the bootloader.

Describe the LCDB regulator present on the PM8150L. Use it as a fallback
compatible for LCDB blocks on PMI632 and PM6150L. PM660L has a different
version of LCDB block, so it's not being covered.

Assisted-by: LLM
Signed-off-by: Dmitry Baryshkov <redacted>
---
[...]
quoted hunk ↗ jump to hunk
+        lcdb@ec00 {
+            compatible = "qcom,pm8150l-lcdb";
+            reg = <0xec00>;
+            interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;
+
+            ldo {
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+            };
+
+            ncp {
+                regulator-min-microvolt = <4000000>;
+                regulator-max-microvolt = <6000000>;
+            };
Let's tighten up the example to some specific voltage to reduce
room for poor copypastas

Konrad
Thread (22 messages) 22 messages, 5 authors, last reply 27d ago
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help