On Wed, Aug 12, 2026 at 09:21:47PM +0200, Wim de With wrote:
Add a driver for the Orient Chip OCP8178 backlight controller.
The OCP8178 supports either PWM or a vendor-specific onewire protocol
over GPIO. This driver implements the onewire protocol, which enables
setting static brightness levels without requiring a continuous PWM
signal from the host CPU. Note that while the vendor calls the protocol
1-Wire, it is not the 1-Wire protocol from Dallas Semiconductor as
implemented in drivers/w1.
Signed-off-by: Wim de With <redacted>
Reviewed-by: Daniel Thompson (RISCstar) <danielt@kernel.org>
Daniel.