[PATCH 0/2] backlight: Add support for Orient Chip OCP8178

The ClockworkPi uConsole[1] is a modular handheld console manufactured
by Clockwork Tech that runs Linux. It consists of a mainboard which
connects a number of peripherals, such as the screen, batteries and
keyboard. This mainboard hosts a system on a module (SoM), such as the
Raspberry Pi Compute Module as a so-called core to provide the compute
for the device. The device supports different kinds of SoM as cores. The
mainboard is shared between different devices, such as the DevTerm[2].

Currently, the uConsole requires a number of out-of-tree drivers to
support the hardware. In addition, most (if not all) supported SoMs
require vendor kernels. In practice, this means that kernel support for
the device is scattered across various repositories in the form of
patches with dubious quality.

This patch series is the first in an attempt to upstream as many of the
needed drivers as possible. The goal is to support at least the
mainboard and the peripherals of the uConsole in the upstream kernel.
These drivers should find their way downstream to the SoM vendor kernels
eventually.

This series adds the driver for the backlight controller, the Orient
Chip OCP8178. I wrote the driver from scratch using the datasheet, to
avoid any copyright or attribution problems.

[1]: https://www.clockworkpi.com/home-uconsole
[2]: https://www.clockworkpi.com/home-devterm

Wim de With (2):
  dt-bindings: backlight: Add Orient Chip OCP8178 bindings
  backlight: Add support for Orient Chip OCP8178

 .../bindings/leds/backlight/ocs,ocp8178.yaml  |  46 ++++
 MAINTAINERS                                   |   6 +
 drivers/video/backlight/Kconfig               |  10 +
 drivers/video/backlight/Makefile              |   1 +
 drivers/video/backlight/ocp8178_bl.c          | 243 ++++++++++++++++++
 5 files changed, 306 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/leds/backlight/ocs,ocp8178.yaml
 create mode 100644 drivers/video/backlight/ocp8178_bl.c

-- 
2.55.0