[PATCH v5 5/7] fbdev: au1100fb: Replace custom printk wrappers by pr_*

@@ -41,6 +41,9 @@
  *  with this program; if not, write  to the Free Software Foundation, Inc.,
  *  675 Mass Ave, Cambridge, MA 02139, USA.
  */
+
+#define pr_fmt(fmt) "au1100fb:" fmt "\n"
+
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/io.h>

@@ -57,8 +60,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#define DEBUG 0
-
 #include "au1100fb.h"
 
 #if defined(CONFIG_COMPILE_TEST) && !defined(CONFIG_MIPS)

@@ -97,7 +98,7 @@ static int au1100fb_fb_blank(int blank_mode, struct fb_info *fbi)
 {
 	struct au1100fb_device *fbdev = to_au1100fb_device(fbi);
 
-	print_dbg("fb_blank %d %p", blank_mode, fbi);
+	pr_devel("fb_blank %d %p", blank_mode, fbi);
 
 	switch (blank_mode) {
 

@@ -291,7 +292,7 @@ static int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info
 
 	fbdev = to_au1100fb_device(fbi);
 
-	print_dbg("fb_pan_display %p %p", var, fbi);
+	pr_devel("fb_pan_display %p %p", var, fbi);
 
 	if (!var || !fbdev) {
 		return -EINVAL;

@@ -302,13 +303,13 @@ static int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info
 		return -EINVAL;
 	}
 
-	print_dbg("fb_pan_display 2 %p %p", var, fbi);
+	pr_devel("fb_pan_display 2 %p %p", var, fbi);
 	dy = var->yoffset - fbi->var.yoffset;
 	if (dy) {
 
 		u32 dmaaddr;
 
-		print_dbg("Panning screen of %d lines", dy);
+		pr_devel("Panning screen of %d lines", dy);
 
 		dmaaddr = fbdev->regs->lcd_dmaaddr0;
 		dmaaddr += (fbi->fix.line_length * dy);

@@ -322,7 +323,7 @@ static int au1100fb_fb_pan_display(struct fb_var_screeninfo *var, struct fb_info
 			fbdev->regs->lcd_dmaaddr0 = LCD_DMA_SA_N(dmaaddr);
 	}
 	}
-	print_dbg("fb_pan_display 3 %p %p", var, fbi);
+	pr_devel("fb_pan_display 3 %p %p", var, fbi);
 
 	return 0;
 }

@@ -365,7 +366,7 @@ static int au1100fb_setup(struct au1100fb_device *fbdev)
 	int num_panels = ARRAY_SIZE(known_lcd_panels);
 
 	if (num_panels <= 0) {
-		print_err("No LCD panels supported by driver!");
+		pr_err("No LCD panels supported by driver!");
 		return -ENODEV;
 	}
 

@@ -388,16 +389,16 @@ static int au1100fb_setup(struct au1100fb_device *fbdev)
 				}
 			}
 			if (i >= num_panels) {
-				print_warn("Panel '%s' not supported!", this_opt);
+				pr_warn("Panel '%s' not supported!", this_opt);
 				return -ENODEV;
 			}
 		}
 		/* Unsupported option */
 		else
-			print_warn("Unsupported option \"%s\"", this_opt);
+			pr_warn("Unsupported option \"%s\"", this_opt);
 	}
 
-	print_info("Panel=%s", fbdev->panel->name);
+	pr_info("Panel=%s", fbdev->panel->name);
 
 	return 0;
 }

@@ -422,7 +423,7 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 	/* Allocate region for our registers and map them */
 	regs_res = platform_get_resource(dev, IORESOURCE_MEM, 0);
 	if (!regs_res) {
-		print_err("fail to retrieve registers resource");
+		pr_err("fail to retrieve registers resource");
 		return -EFAULT;
 	}
 

@@ -440,15 +441,15 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 				     fbdev->info.fix.mmio_start,
 				     fbdev->info.fix.mmio_len,
 				     DRIVER_NAME)) {
-		print_err("fail to lock memory region at 0x%08lx",
+		pr_err("fail to lock memory region at 0x%08lx",
 			  fbdev->info.fix.mmio_start);
 		return -EBUSY;
 	}
 
 	fbdev->regs = (struct au1100fb_regs*)KSEG1ADDR(fbdev->info.fix.mmio_start);
 
-	print_dbg("Register memory map at %p", fbdev->regs);
-	print_dbg("phys=0x%08x, size=%zu", fbdev->regs_phys, fbdev->regs_len);
+	pr_devel("Register memory map at %p", fbdev->regs);
+	pr_devel("phys=0x%08x, size=%zu", fbdev->regs_phys, fbdev->regs_len);
 
 	c = clk_get(NULL, "lcd_intclk");
 	if (!IS_ERR(c)) {

@@ -465,7 +466,7 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 					    PAGE_ALIGN(fbdev->fb_len),
 					    &fbdev->fb_phys, GFP_KERNEL);
 	if (!fbdev->fb_mem) {
-		print_err("fail to allocate framebuffer (size: %zuK))",
+		pr_err("fail to allocate framebuffer (size: %zuK))",
 			  fbdev->fb_len / 1024);
 		return -ENOMEM;
 	}

@@ -473,8 +474,8 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 	fbdev->info.fix.smem_start = fbdev->fb_phys;
 	fbdev->info.fix.smem_len = fbdev->fb_len;
 
-	print_dbg("Framebuffer memory map at %p", fbdev->fb_mem);
-	print_dbg("phys=0x%pad, size=%zuK", &fbdev->fb_phys, fbdev->fb_len / 1024);
+	pr_devel("Framebuffer memory map at %p", fbdev->fb_mem);
+	pr_devel("phys=0x%pad, size=%zuK", &fbdev->fb_phys, fbdev->fb_len / 1024);
 
 	/* load the panel info into the var struct */
 	fbdev->info.var = (struct fb_var_screeninfo) {

@@ -498,7 +499,7 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 		return -ENOMEM;
 
 	if (fb_alloc_cmap(&fbdev->info.cmap, AU1100_LCD_NBR_PALETTE_ENTRIES, 0) < 0) {
-		print_err("Fail to allocate colormap (%d entries)",
+		pr_err("Fail to allocate colormap (%d entries)",
 			   AU1100_LCD_NBR_PALETTE_ENTRIES);
 		return -EFAULT;
 	}

@@ -508,7 +509,7 @@ static int au1100fb_drv_probe(struct platform_device *dev)
 
 	/* Register new framebuffer */
 	if (register_framebuffer(&fbdev->info) < 0) {
-		print_err("cannot register new framebuffer");
+		pr_err("cannot register new framebuffer");
 		goto failed;
 	}
 

@@ -30,16 +30,6 @@
 #ifndef _AU1100LCD_H
 #define _AU1100LCD_H
 
-#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
-#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
-#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
-
-#if DEBUG
-#define print_dbg(f, arg...) printk(__FILE__ ": " f "\n", ## arg)
-#else
-#define print_dbg(f, arg...) do {} while (0)
-#endif
-
 #if defined(__BIG_ENDIAN)
 #define LCD_CONTROL_DEFAULT_PO LCD_CONTROL_PO_11
 #else