[PATCH] dt-bindings: Remove extra blank lines

Subsystems: ab8500 battery and charger drivers, ad738x adc driver (ad7380/1/2/4), amphion vpu codec v4l2 driver, analog devices inc ade9000 driver, analog devices inc adv7604 driver, analog devices inc asoc codec drivers, analog devices inc iio drivers, applied micro (apm) x-gene soc edac, arm generic interrupt controller drivers, arm smmu drivers, arm/cortina systems gemini arm architecture, arm/qualcomm mailing list, arm/samsung s5p series jpeg codec support, broadcom genet ethernet driver, clocksource, clockevent drivers, common clk framework, dma generic offload engine subsystem, drm driver for ilitek ili9486 panels, drm driver for synopsys designware displayport bridge, drm driver for tpo tpg110 panels, drm driver for qualcomm adreno gpus, drm driver for qualcomm display hardware, drm drivers, drm drivers and misc gpu patches, drm drivers for allwinner a10, drm drivers for amlogic socs, drm drivers for bridge chips, drm drivers for rockchip, drm panel drivers, ethernet phy library, fpga manager framework, freescale soc drivers, generic phy framework, gpio subsystem, hardware monitoring, hardware random number generator core, i2c muxes, i2c subsystem host drivers, iio subsystem and drivers, iio unit converter, input (keyboard, mouse, joystick, touchscreen) drivers, interconnect api, iommu subsystem, irqchip drivers, lm90 hardware monitor driver, ltc2947 hardware monitor driver, ltc2983 iio temperature driver, mailbox api, mailbox arm mhuv2, media input infrastructure (v4l/dvb), memory controller drivers, memory technology devices (mtd), meson nand controller driver for amlogic socs, microchip soc drivers, multifunction devices (mfd), multiplexer subsystem, networking drivers, networking drivers (wireless), nxp i.mx 8qxp/8qm jpeg v4l2 driver, open firmware and flattened device tree bindings, pci driver for altera pcie ip, pci driver for arm versatile platform, pci native host bridge and endpoint drivers, pci subsystem, pcie driver for starfive jh71x0, pin control subsystem, pin controller - freescale, pin controller - qualcomm, pin controller - renesas, power state coordination interface (psci), power supply class/subsystem and drivers, pwm subsystem, qualcomm camera subsystem driver, qualcomm media platform, qualcomm typec port manager driver, remote processor (remoteproc) subsystem, renesas clock drivers, reset controller framework, rockchip i2s tdm driver, rtl9300 i2c driver (rtl9300-i2c), samsung audio (asoc) drivers, samsung s5p/exynos4 soc series camera subsystem drivers, simplefb fb driver, sound - soc layer / dynamic audio power management (asoc), starfive jh71x0 pinctrl drivers, stm32 dma drivers, synopsys designware dmac driver, texas instruments audio (asoc/hda) drivers, texas instruments tps23861 poe pse driver, texas instruments' system control interface (tisci) protocol driver, the rest, ti keystone multicore navigator drivers, usb subsystem, voltage and current regulator framework, wolfson microelectronics drivers

STALE276d

17 messages, 17 authors, 2025-10-31 · open the first message on its own page

[PATCH] dt-bindings: Remove extra blank lines

From: "Rob Herring (Arm)" <robh@kernel.org>
Date: 2025-10-23 14:40:11 

Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/.yamllint                  | 2 +-
 Documentation/devicetree/bindings/arm/psci.yaml              | 1 -
 .../bindings/clock/allwinner,sun4i-a10-gates-clk.yaml        | 1 -
 .../devicetree/bindings/clock/renesas,cpg-mssr.yaml          | 1 -
 .../devicetree/bindings/clock/xlnx,clocking-wizard.yaml      | 1 -
 .../display/allwinner,sun4i-a10-display-frontend.yaml        | 1 -
 .../devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml | 1 -
 .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml       | 1 -
 .../devicetree/bindings/display/amlogic,meson-vpu.yaml       | 1 -
 .../devicetree/bindings/display/bridge/adi,adv7511.yaml      | 1 -
 .../devicetree/bindings/display/bridge/lvds-codec.yaml       | 1 -
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml | 1 -
 .../devicetree/bindings/display/ilitek,ili9486.yaml          | 1 -
 Documentation/devicetree/bindings/display/msm/gpu.yaml       | 1 -
 .../devicetree/bindings/display/panel/panel-timing.yaml      | 1 -
 .../devicetree/bindings/display/panel/tpo,tpg110.yaml        | 1 -
 .../devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml | 1 -
 .../devicetree/bindings/display/simple-framebuffer.yaml      | 1 -
 .../devicetree/bindings/dma/snps,dma-spear1340.yaml          | 1 -
 Documentation/devicetree/bindings/dma/stericsson,dma40.yaml  | 1 -
 .../devicetree/bindings/dma/stm32/st,stm32-dma.yaml          | 1 -
 Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml   | 1 -
 .../devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml       | 1 -
 Documentation/devicetree/bindings/fpga/fpga-region.yaml      | 5 -----
 .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml        | 1 -
 .../devicetree/bindings/gpio/fairchild,74hc595.yaml          | 1 -
 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml     | 1 -
 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml    | 1 -
 Documentation/devicetree/bindings/hwmon/national,lm90.yaml   | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml       | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml     | 1 -
 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml     | 1 -
 .../devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml         | 1 -
 Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml  | 2 --
 Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml   | 1 -
 .../devicetree/bindings/iio/adc/cosmic,10001-adc.yaml        | 1 -
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml  | 1 -
 .../devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml     | 1 -
 .../devicetree/bindings/iio/afe/voltage-divider.yaml         | 1 -
 .../devicetree/bindings/iio/frequency/adi,admv4420.yaml      | 1 -
 .../devicetree/bindings/iio/pressure/murata,zpa2326.yaml     | 1 -
 .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml    | 1 -
 .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml     | 1 -
 Documentation/devicetree/bindings/input/ti,drv266x.yaml      | 1 -
 .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
 .../devicetree/bindings/interrupt-controller/arm,gic-v3.yaml | 1 -
 .../bindings/interrupt-controller/aspeed,ast2700-intc.yaml   | 1 -
 .../bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml     | 1 -
 .../bindings/interrupt-controller/loongson,liointc.yaml      | 1 -
 .../bindings/interrupt-controller/mediatek,mtk-cirq.yaml     | 1 -
 .../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml | 1 -
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml        | 4 ----
 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml       | 1 -
 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml     | 1 -
 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml | 1 -
 Documentation/devicetree/bindings/media/amphion,vpu.yaml     | 1 -
 Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml | 2 --
 .../devicetree/bindings/media/i2c/techwell,tw9900.yaml       | 1 -
 Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 1 -
 .../devicetree/bindings/media/qcom,sc8280xp-camss.yaml       | 1 -
 .../bindings/media/samsung,exynos4212-fimc-is.yaml           | 1 -
 .../devicetree/bindings/media/samsung,s5pv210-jpeg.yaml      | 1 -
 Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml  | 1 -
 .../devicetree/bindings/media/video-interface-devices.yaml   | 4 ----
 .../memory-controllers/qcom,ebi2-peripheral-props.yaml       | 1 -
 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 1 -
 .../devicetree/bindings/mtd/amlogic,meson-nand.yaml          | 1 -
 .../devicetree/bindings/mtd/marvell,nand-controller.yaml     | 1 -
 Documentation/devicetree/bindings/mux/mux-controller.yaml    | 1 -
 .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml   | 2 --
 Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml     | 1 -
 .../devicetree/bindings/net/brcm,mdio-mux-iproc.yaml         | 1 -
 .../devicetree/bindings/net/cortina,gemini-ethernet.yaml     | 1 -
 Documentation/devicetree/bindings/net/fsl,gianfar.yaml       | 2 --
 .../devicetree/bindings/net/mdio-mux-multiplexer.yaml        | 1 -
 Documentation/devicetree/bindings/net/qcom,ipa.yaml          | 1 -
 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml    | 1 -
 .../devicetree/bindings/net/wireless/ti,wlcore.yaml          | 1 -
 .../devicetree/bindings/pci/altr,pcie-root-port.yaml         | 1 -
 Documentation/devicetree/bindings/pci/loongson.yaml          | 1 -
 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 1 -
 .../devicetree/bindings/pci/starfive,jh7110-pcie.yaml        | 1 -
 Documentation/devicetree/bindings/pci/versatile.yaml         | 1 -
 .../bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 1 -
 .../devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml   | 1 -
 .../devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml        | 1 -
 .../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml     | 1 -
 .../bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml      | 1 -
 .../devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml        | 1 -
 .../devicetree/bindings/pinctrl/renesas,rza1-ports.yaml      | 3 ---
 .../devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 1 -
 .../devicetree/bindings/power/supply/mt6360_charger.yaml     | 1 -
 .../bindings/power/supply/stericsson,ab8500-charger.yaml     | 1 -
 .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml     | 1 -
 .../bindings/regulator/richtek,rt6245-regulator.yaml         | 1 -
 .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml      | 2 --
 Documentation/devicetree/bindings/reset/ti,sci-reset.yaml    | 1 -
 .../bindings/rng/inside-secure,safexcel-eip76.yaml           | 2 --
 .../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml     | 1 -
 .../devicetree/bindings/soc/mediatek/mediatek,mutex.yaml     | 1 -
 .../bindings/soc/microchip/atmel,at91rm9200-tcb.yaml         | 1 -
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml      | 1 -
 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml       | 3 ---
 Documentation/devicetree/bindings/sound/adi,adau1372.yaml    | 1 -
 Documentation/devicetree/bindings/sound/adi,adau7118.yaml    | 1 -
 .../devicetree/bindings/sound/rockchip,i2s-tdm.yaml          | 1 -
 .../devicetree/bindings/sound/rockchip,rk3328-codec.yaml     | 2 +-
 Documentation/devicetree/bindings/sound/samsung,tm2.yaml     | 1 -
 .../devicetree/bindings/sound/ti,tlv320dac3100.yaml          | 1 -
 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml      | 1 -
 .../devicetree/bindings/timer/nvidia,tegra-timer.yaml        | 1 -
 .../devicetree/bindings/timer/nvidia,tegra186-timer.yaml     | 1 -
 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml   | 1 -
 116 files changed, 2 insertions(+), 136 deletions(-)

diff --git a/Documentation/devicetree/bindings/.yamllint b/Documentation/devicetree/bindings/.yamllint
index 532799501800..8f9dd18dfe04 100644
--- a/Documentation/devicetree/bindings/.yamllint
+++ b/Documentation/devicetree/bindings/.yamllint
@@ -30,7 +30,7 @@ rules:
   document-start:
     present: true
   empty-lines:
-    max: 3
+    max: 1
     max-end: 1
   empty-values:
     forbid-in-block-mappings: true
diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 7360a2849b5b..6e2e0c551841 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -163,7 +163,6 @@ examples:
       method          = "smc";
     };
 
-
   - |+
 
     // Case 3: PSCI v0.2 and PSCI v0.1.
diff --git a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
index c4714d0fbe07..e588a7e8f260 100644
--- a/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
+++ b/Documentation/devicetree/bindings/clock/allwinner,sun4i-a10-gates-clk.yaml
@@ -132,7 +132,6 @@ examples:
                              "ahb_mp", "ahb_mali400";
     };
 
-
   - |
     clk@1c20068 {
         #clock-cells = <1>;
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
index bc2fd3761328..655154534c0f 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.yaml
@@ -99,7 +99,6 @@ properties:
       the datasheet.
     const: 1
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
index b44a76a958f4..b497c28e8094 100644
--- a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
+++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml
@@ -22,7 +22,6 @@ properties:
       - xlnx,clocking-wizard-v6.0
       - xlnx,versal-clk-wizard
 
-
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 98e8240a05bd..995b3ef408b7 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 895506d93f4c..85a6086cc10e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -121,5 +121,4 @@ examples:
         };
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index 60fd927b5a06..c43b02ec884f 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -142,7 +142,6 @@ then:
     reset-names:
       minItems: 2
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index cb0a90f02321..3ae45db85ea7 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -25,7 +25,6 @@ description: |
   M  |-------|______|----|____________|   |________________|    |               |
   ___|__________________________________________________________|_______________|
 
-
   VIU: Video Input Unit
   ---------------------
 
diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
index 5bbe81862c8f..d29a0d06187e 100644
--- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.yaml
@@ -156,7 +156,6 @@ else:
     adi,input-style: false
     adi,input-justification: false
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index 0487bbffd7f7..4f7d3e9cf0c2 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -131,7 +131,6 @@ required:
 
 additionalProperties: false
 
-
 examples:
   - |
     lvds-encoder {
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
index b78f64c9c5f4..70f229dc4e0c 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358767.yaml
@@ -123,7 +123,6 @@ properties:
       - required:
           - port@1
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
index 9cc1fd0751cd..7d78edc403dc 100644
--- a/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
+++ b/Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
@@ -54,7 +54,6 @@ examples:
             #address-cells = <1>;
             #size-cells = <0>;
 
-
             display@0{
                     compatible = "waveshare,rpi-lcd-35", "ilitek,ili9486";
                     reg = <0>;
diff --git a/Documentation/devicetree/bindings/display/msm/gpu.yaml b/Documentation/devicetree/bindings/display/msm/gpu.yaml
index 3696b083e353..826aafdcc20b 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gpu.yaml
@@ -133,7 +133,6 @@ properties:
       For GMU attached devices a phandle to the GMU device that will
       control the power for the GPU.
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
index aea69b84ca5d..8c9774458777 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-timing.yaml
@@ -41,7 +41,6 @@ description: |
   |       |          |        v                            |          |
   +-------+----------+-------------------------------------+----------+
 
-
   The following is the panel timings shown with time on the x-axis.
   This matches the timing diagrams often found in data sheets.
 
diff --git a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
index 59a373728e62..99db268eb9b3 100644
--- a/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
+++ b/Documentation/devicetree/bindings/display/panel/tpo,tpg110.yaml
@@ -38,7 +38,6 @@ description: |+
   The serial protocol has line names that resemble I2C but the
   protocol is not I2C but 3WIRE SPI.
 
-
 allOf:
   - $ref: panel-common.yaml#
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
index a8a008717997..6345f0132d43 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml
@@ -125,7 +125,6 @@ examples:
         power-domains = <&power RK3588_PD_VO0>;
         #sound-dai-cells = <0>;
 
-
         ports {
           #address-cells = <1>;
           #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
index 296500f9da05..45ffdebc9d86 100644
--- a/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
+++ b/Documentation/devicetree/bindings/display/simple-framebuffer.yaml
@@ -181,7 +181,6 @@ allOf:
       required:
         - amlogic,pipeline
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
index c21a4f073f6c..18c0a7c18bc8 100644
--- a/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
+++ b/Documentation/devicetree/bindings/dma/snps,dma-spear1340.yaml
@@ -22,7 +22,6 @@ properties:
               - renesas,r9a06g032-dma
           - const: renesas,rzn1-dma
 
-
   "#dma-cells":
     minimum: 3
     maximum: 4
diff --git a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
index 7b94d24d5ef4..8b42d9880400 100644
--- a/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
+++ b/Documentation/devicetree/bindings/dma/stericsson,dma40.yaml
@@ -120,7 +120,6 @@ properties:
           - description: LCPA memory base, deprecated, use eSRAM pool instead
         deprecated: true
 
-
   reg-names:
     oneOf:
       - items:
diff --git a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
index 11a289f1d505..598903354196 100644
--- a/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/stm32/st,stm32-dma.yaml
@@ -48,7 +48,6 @@ description: |
               by transfer completion. This must only be used on channels
               managing transfers for STM32 USART/UART.
 
-
 maintainers:
   - Amelie Delaunay <amelie.delaunay@foss.st.com>
 
diff --git a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
index 9afc78254cc0..9637df7af3c8 100644
--- a/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
+++ b/Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml
@@ -97,7 +97,6 @@ patternProperties:
       - reg
       - memory-controller
 
-
   '^edacpmd@':
     description: PMD subnode
     type: object
diff --git a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
index 3faae3236665..c6fc1d6e25da 100644
--- a/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
+++ b/Documentation/devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml
@@ -23,7 +23,6 @@ description: |
   The authoritative guest-side hardware interface documentation to the fw_cfg
   device can be found in "docs/specs/fw_cfg.txt" in the QEMU source tree.
 
-
 properties:
   compatible:
     const: qemu,fw-cfg-mmio
diff --git a/Documentation/devicetree/bindings/fpga/fpga-region.yaml b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
index 7d2d3b7aa4b7..4c61461d6247 100644
--- a/Documentation/devicetree/bindings/fpga/fpga-region.yaml
+++ b/Documentation/devicetree/bindings/fpga/fpga-region.yaml
@@ -18,7 +18,6 @@ description: |
    - Supported Use Models
    - Constraints
 
-
   Introduction
   ============
 
@@ -31,7 +30,6 @@ description: |
   document isn't a replacement for any manufacturers specifications for FPGA
   usage.
 
-
   Terminology
   ===========
 
@@ -108,7 +106,6 @@ description: |
   a soft logic bridge (Bridge0-2) in the FPGA.  The contents of each PRR can be
   reprogrammed independently while the rest of the system continues to function.
 
-
   Sequence
   ========
 
@@ -124,7 +121,6 @@ description: |
   When the overlay is removed, the child nodes will be removed and the FPGA Region
   will disable the bridges.
 
-
   FPGA Region
   ===========
 
@@ -170,7 +166,6 @@ description: |
   hardware bridges remain enabled.  The PR regions' bridges will be FPGA bridges
   within the static image of the FPGA.
 
-
   Supported Use Models
   ====================
 
diff --git a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
index c213cb9ddb9f..5cfefbbea6ca 100644
--- a/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml
@@ -66,5 +66,4 @@ examples:
         interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
index ab35bcf98101..23410aeca300 100644
--- a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
+++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml
@@ -22,7 +22,6 @@ description: |
                  ___                     ________
   chip select#      |___________________|
 
-
 maintainers:
   - Maxime Ripard <mripard@kernel.org>
 
diff --git a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
index 152935334c76..3e3f49cf2f52 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml
@@ -81,7 +81,6 @@ required:
   - compatible
   - reg
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
index f60e06ab7d0a..c2f7c6ee1a37 100644
--- a/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adi,max31827.yaml
@@ -93,7 +93,6 @@ allOf:
         adi,fault-q:
           default: 4
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
index 1b871f166e79..164068ba069d 100644
--- a/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
+++ b/Documentation/devicetree/bindings/hwmon/national,lm90.yaml
@@ -45,7 +45,6 @@ properties:
       - ti,tmp461
       - winbond,w83l771
 
-
   interrupts:
     items:
       - description: |
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
index cba5b4a1b81f..0fe6ea190f60 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml
@@ -20,7 +20,6 @@ description: |
   https://www.ti.com/lit/gpn/tmp513
   https://www.ti.com/lit/gpn/tmp512
 
-
 properties:
   compatible:
     enum:
diff --git a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
index ee7de53e1918..d57e4bf8f65f 100644
--- a/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
+++ b/Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml
@@ -15,7 +15,6 @@ description: |
   Datasheets:
   https://www.ti.com/lit/gpn/tps23861
 
-
 properties:
   compatible:
     enum:
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
index b6af924dee2e..d8610daa10cd 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml
@@ -27,7 +27,6 @@ description: |+
       |   '------' |                  | dev |  | dev |  | dev |
       '------------'                  '-----'  '-----'  '-----'
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
index 17ce39c19ab1..f9a449fee2b0 100644
--- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
+++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml
@@ -64,7 +64,6 @@ patternProperties:
     required:
       - reg
 
-
 allOf:
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
index 28139b676661..19cfffb39296 100644
--- a/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
+++ b/Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml
@@ -16,7 +16,6 @@ description: |
   can be selected by writing the appropriate device number to an I2C config
   register.
 
-
       +--------------------------------------------------+
       | Mule                                             |
   0x18|    +---------------+                             |
@@ -34,7 +33,6 @@ description: |
       |                        |__/          +--------+  |
       +--------------------------------------------------+
 
-
 allOf:
   - $ref: /schemas/i2c/i2c-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
index 8dae89ecb64d..b91bfb16ed6b 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml
@@ -30,7 +30,6 @@ description: |
   * https://www.analog.com/en/products/adaq4380-4.html
   * https://www.analog.com/en/products/adaq4381-4.html
 
-
 $ref: /schemas/spi/spi-peripheral-props.yaml#
 
 properties:
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 1180d2ffbf84..73c8e9c532f3 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -166,7 +166,6 @@ properties:
       An example of backend can be found at
       http://analogdevicesinc.github.io/hdl/library/axi_ad7606x/index.html
 
-
 patternProperties:
   "^channel@[1-8]$":
     type: object
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
index 9ee4d977c5ed..238a8c9c4143 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml
@@ -48,7 +48,6 @@ properties:
     enum: [2500000, 4096000]
     default: 4096000
 
-
   '#io-channel-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
index bd429552d568..f22eba0250ee 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml
@@ -57,7 +57,6 @@ properties:
     description: External clock source when not using crystal
     maxItems: 1
 
-
   "#clock-cells":
     description:
       ADE9000 can provide clock output via CLKOUT pin with external buffer.
diff --git a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
index 4e695b97d015..9ea44ce63f25 100644
--- a/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/cosmic,10001-adc.yaml
@@ -36,7 +36,6 @@ properties:
   "#io-channel-cells":
     const: 1
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
index 17bb60e18a1c..c4c4575d3fa9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
@@ -456,7 +456,6 @@ patternProperties:
               items:
                 minimum: 40
 
-
       - if:
           properties:
             compatible:
diff --git a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
index 1caa896fce82..de91cb03fdc6 100644
--- a/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml
@@ -57,7 +57,6 @@ description: |
    4 | batt_dischrg_i
    5 | ts_v
 
-
 properties:
   compatible:
     oneOf:
diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
index 4151f99b42aa..9752d1450064 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.yaml
@@ -29,7 +29,6 @@ description: |
             |
            GND
 
-
 properties:
   compatible:
     const: voltage-divider
diff --git a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
index 64f2352aac3d..ca40359a3944 100644
--- a/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
+++ b/Documentation/devicetree/bindings/iio/frequency/adi,admv4420.yaml
@@ -37,7 +37,6 @@ required:
   - compatible
   - reg
 
-
 allOf:
   - $ref: /schemas/spi/spi-peripheral-props.yaml#
 
diff --git a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
index c33640ddde58..886f4129c301 100644
--- a/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
+++ b/Documentation/devicetree/bindings/iio/pressure/murata,zpa2326.yaml
@@ -12,7 +12,6 @@ maintainers:
 description: |
   Pressure sensor from Murata with SPI and I2C bus interfaces.
 
-
 properties:
   compatible:
     const: murata,zpa2326
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
index 48f221463166..8fed45ee557b 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9324.yaml
@@ -78,7 +78,6 @@ properties:
     minItems: 3
     maxItems: 3
 
-
   semtech,ph01-resolution:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8, 16, 32, 64, 128, 256, 512, 1024]
diff --git a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
index ee0b558bb866..a22725f7619b 100644
--- a/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
+++ b/Documentation/devicetree/bindings/iio/temperature/adi,ltc2983.yaml
@@ -39,7 +39,6 @@ $defs:
       - reg
       - adi,sensor-type
 
-
 properties:
   compatible:
     oneOf:
diff --git a/Documentation/devicetree/bindings/input/ti,drv266x.yaml b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
index da1818824373..1bce389d0e5c 100644
--- a/Documentation/devicetree/bindings/input/ti,drv266x.yaml
+++ b/Documentation/devicetree/bindings/input/ti,drv266x.yaml
@@ -37,7 +37,6 @@ examples:
   - |
     #include <dt-bindings/gpio/gpio.h>
 
-
     i2c {
         #address-cells = <1>;
         #size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index dad3ad2fd93b..da16d8e9bdc5 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -122,7 +122,6 @@ allOf:
       required:
         - reg
 
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
index f3247a47f9ee..bfd30aae682b 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml
@@ -305,7 +305,6 @@ examples:
       };
     };
 
-
     device@0 {
       reg = <0 4>;
       interrupts = <1 1 4 &part0>;
diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
index 55636d06a674..c45e97e2f583 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml
@@ -53,7 +53,6 @@ properties:
                                |         |---...
                                +---------+---module31
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
index fdc254f8d013..55b1ae863b91 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml
@@ -14,7 +14,6 @@ description:
   Vybrid SoC's but is only really useful in dual core configurations (VF6xx
   which comes with a Cortex-A5/Cortex-M4 combination).
 
-
 maintainers:
   - Frank Li <Frank.Li@nxp.com>
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
index 60441f0c5d72..f63b23f48d8e 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/loongson,liointc.yaml
@@ -78,7 +78,6 @@ required:
   - '#interrupt-cells'
   - loongson,parent_int_map
 
-
 unevaluatedProperties: false
 
 if:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
index fdcb4d8db818..20dfffb34f0c 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,mtk-cirq.yaml
@@ -18,7 +18,6 @@ description:
   flush command is executed. With CIRQ, MCUSYS can be completely turned off
   to improve the system power consumption without losing interrupts.
 
-
 properties:
   compatible:
     items:
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
index 4ff609faba32..d943ea820cdd 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
+++ b/Documentation/devicetree/bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml
@@ -26,7 +26,6 @@ properties:
           - mscc,ocelot-icpu-intr
           - mscc,serval-icpu-intr
 
-
   '#interrupt-cells':
     const: 1
 
diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
index 89495f094d52..f8bd24d5949e 100644
--- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
+++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml
@@ -638,7 +638,6 @@ examples:
                      <&smmu1 7>;
     };
 
-
     /* SMMU with stream matching */
     smmu2: iommu@ba5f0000 {
             compatible = "arm,smmu-v1";
@@ -664,7 +663,6 @@ examples:
             iommus = <&smmu2 1 0x30>;
     };
 
-
     /* ARM MMU-500 with 10-bit stream ID input configuration */
     smmu3: iommu@ba600000 {
             compatible = "arm,mmu-500", "arm,smmu-v2";
@@ -685,8 +683,6 @@ examples:
             /* bus whose child devices emit one unique 10-bit stream
                ID each, but may master through multiple SMMU TBUs */
             iommu-map = <0 &smmu3 0 0x400>;
-
-
     };
 
   - |+
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
index d9a4f4a02d7c..e45b661e8b41 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml
@@ -52,7 +52,6 @@ properties:
           - const: arm,mhu-doorbell
           - const: arm,primecell
 
-
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
index 02f06314d85f..3828d77f6316 100644
--- a/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
+++ b/Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml
@@ -127,7 +127,6 @@ properties:
         - minimum: 0
           maximum: 124
 
-
   '#mbox-cells':
     description: |
       It is always set to 2. The first argument in the consumers 'mboxes'
diff --git a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
index 8a1369df4ecb..4ca0d5e49c79 100644
--- a/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
+++ b/Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
@@ -26,7 +26,6 @@ properties:
               - mediatek,mt8188-adsp-mbox
           - const: mediatek,mt8186-adsp-mbox
 
-
   "#mbox-cells":
     const: 0
 
diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
index 5a920d9e78c7..fa18013d705d 100644
--- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
+++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
@@ -45,7 +45,6 @@ patternProperties:
       between driver and firmware. Implement via mailbox on driver.
     $ref: /schemas/mailbox/fsl,mu.yaml#
 
-
   "^vpu-core@[0-9a-f]+$":
     description:
       Each core correspond a decoder or encoder, need to configure them
diff --git a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
index 2dc2829d42a0..f8d9889dbc21 100644
--- a/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml
@@ -154,7 +154,5 @@ examples:
                                     };
                             };
                     };
-
-
             };
     };
diff --git a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
index c9673391afdb..0592d0b9af92 100644
--- a/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
+++ b/Documentation/devicetree/bindings/media/i2c/techwell,tw9900.yaml
@@ -70,7 +70,6 @@ properties:
         $ref: /schemas/graph.yaml#/properties/port
         description: Video port for the decoder output.
 
-
     required:
       - port@0
       - port@1
diff --git a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
index 4cba42ba7cf7..b5aca3d2cc5c 100644
--- a/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml
@@ -79,7 +79,6 @@ allOf:
         power-domains:
           minItems: 2        # Wrapper and 1 slot
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
index d195f1bfb23d..c99fe4106eee 100644
--- a/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
+++ b/Documentation/devicetree/bindings/media/qcom,sc8280xp-camss.yaml
@@ -484,7 +484,6 @@ examples:
                           "gcc_axi_hf",
                           "gcc_axi_sf";
 
-
             iommus = <&apps_smmu 0x2000 0x4e0>,
                      <&apps_smmu 0x2020 0x4e0>,
                      <&apps_smmu 0x2040 0x4e0>,
diff --git a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
index 71d63bb9abb5..32e72d11bd19 100644
--- a/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
+++ b/Documentation/devicetree/bindings/media/samsung,exynos4212-fimc-is.yaml
@@ -111,7 +111,6 @@ patternProperties:
       reg:
         maxItems: 1
 
-
       clocks:
         maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
index e28d6ec56c0b..5c969e764d4f 100644
--- a/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
+++ b/Documentation/devicetree/bindings/media/samsung,s5pv210-jpeg.yaml
@@ -42,7 +42,6 @@ properties:
   reg:
     maxItems: 1
 
-
 required:
   - compatible
   - clocks
diff --git a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
index 4afa4a24b868..b9f7d84f38c2 100644
--- a/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
+++ b/Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml
@@ -21,7 +21,6 @@ description:
     format and copy the result into a part or the whole of a destination image
     with a different color format. (TODO)
 
-
 maintainers:
   - Dillon Min <dillon.minfei@gmail.com>
 
diff --git a/Documentation/devicetree/bindings/media/video-interface-devices.yaml b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
index 3ad1590b0496..a81d2a155fe6 100644
--- a/Documentation/devicetree/bindings/media/video-interface-devices.yaml
+++ b/Documentation/devicetree/bindings/media/video-interface-devices.yaml
@@ -128,7 +128,6 @@ properties:
 
       0 degrees camera rotation:
 
-
                     Y-Rp
                      ^
               Y-Rc   !
@@ -145,7 +144,6 @@ properties:
              0 +------------------------------------->
                0               X-Rc
 
-
                                 X-Rc                0
                <------------------------------------+ 0
                            X-Rp                 0   !
@@ -228,7 +226,6 @@ properties:
                V
               X-Rc
 
-
       Example one - Webcam
 
       A camera module installed on the user facing part of a laptop screen
@@ -273,7 +270,6 @@ properties:
       optical inversion, the two reference systems will not be aligned, with
       'Rp' being rotated 180 degrees relatively to 'Rc':
 
-
                         X-Rc                0
        <------------------------------------+ 0
                                             !
diff --git a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
index 29f8c30e8a88..aec88cd2df76 100644
--- a/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/qcom,ebi2-peripheral-props.yaml
@@ -62,7 +62,6 @@ properties:
     minimum: 0
     maximum: 15
 
-
   # FAST chip selects
   qcom,xmem-address-hold-enable:
     $ref: /schemas/types.yaml#/definitions/uint32
diff --git a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
index b2cfa4120b8a..ce5e845ab5c5 100644
--- a/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
+++ b/Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml
@@ -444,7 +444,6 @@ properties:
 
     additionalProperties: false
 
-
   regulator-external:
     description: Node describing the AB8500 external regulators. This
       concerns the autonomous regulators VSMPS1, VSMPS2 and VSMPS3
diff --git a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
index 284f0f882c32..fa2aa29be794 100644
--- a/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
+++ b/Documentation/devicetree/bindings/mtd/amlogic,meson-nand.yaml
@@ -88,7 +88,6 @@ patternProperties:
       amlogic,boot-pages: [nand-is-boot-medium, "amlogic,boot-page-step"]
       amlogic,boot-page-step: [nand-is-boot-medium, "amlogic,boot-pages"]
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
index 1ecea848e8b9..bc89cbf8193a 100644
--- a/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/marvell,nand-controller.yaml
@@ -145,7 +145,6 @@ allOf:
         clock-names:
           minItems: 1
 
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/mux/mux-controller.yaml b/Documentation/devicetree/bindings/mux/mux-controller.yaml
index 571ad9e13ecf..78340bbe4df6 100644
--- a/Documentation/devicetree/bindings/mux/mux-controller.yaml
+++ b/Documentation/devicetree/bindings/mux/mux-controller.yaml
@@ -20,7 +20,6 @@ description: |
   space is a simple zero-based enumeration. I.e. 0-1 for a 2-way multiplexer,
   0-7 for an 8-way multiplexer, etc.
 
-
   Mux controller nodes
   --------------------
 
diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
index fc62fb2a68ac..323a669fa982 100644
--- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
+++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml
@@ -201,7 +201,6 @@ allOf:
                     - clocks
                     - resets
 
-
             mdio@2:
               $ref: mdio.yaml#
               unevaluatedProperties: false
@@ -251,7 +250,6 @@ allOf:
           maxItems: 1
         power-domains: false
 
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
index 0e3fb4e42e3f..a1119c47e29b 100644
--- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml
@@ -31,7 +31,6 @@ properties:
       - description: RX and TX rings interrupt line
       - description: Wake-on-LAN interrupt line
 
-
   clocks:
     minItems: 1
     items:
diff --git a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
index 3f27746d9a56..d544f785e6b9 100644
--- a/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
+++ b/Documentation/devicetree/bindings/net/brcm,mdio-mux-iproc.yaml
@@ -29,7 +29,6 @@ properties:
     maxItems: 1
     description: core clock driving the MDIO block
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
index 44fd23a5fa2b..a930358f6a66 100644
--- a/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
+++ b/Documentation/devicetree/bindings/net/cortina,gemini-ethernet.yaml
@@ -100,7 +100,6 @@ examples:
       };
     };
 
-
     ethernet@60000000 {
         compatible = "cortina,gemini-ethernet";
         reg = <0x60000000 0x4000>, /* Global registers, queue */
diff --git a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
index f92f284aa05b..0d8909770ccb 100644
--- a/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
+++ b/Documentation/devicetree/bindings/net/fsl,gianfar.yaml
@@ -167,8 +167,6 @@ allOf:
             - description: Receive interrupt
             - description: Error interrupt
 
-
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
index 282987074ee4..23947ba6aeaf 100644
--- a/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
+++ b/Documentation/devicetree/bindings/net/mdio-mux-multiplexer.yaml
@@ -14,7 +14,6 @@ description: |+
   of a mux producer device. The mux producer can be of any type like mmio mux
   producer, gpio mux producer or generic register based mux producer.
 
-
 allOf:
   - $ref: /schemas/net/mdio-mux.yaml#
 
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index b4a79912d473..c7f5f2ef7452 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -24,7 +24,6 @@ description:
   iommu/iommu.txt and iommu/arm,smmu.yaml for more information about SMMU
   bindings.
 
-
   - |
     --------             ---------
     |      |             |       |
diff --git a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
index d14ca81f70e0..8b5da602a2e8 100644
--- a/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
+++ b/Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml
@@ -156,7 +156,6 @@ patternProperties:
       CPSW MDIO bus.
     $ref: ti,davinci-mdio.yaml#
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
index 75c9489f319b..9de5fdefcbcc 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wlcore.yaml
@@ -50,7 +50,6 @@ properties:
       Points to the node of the regulator that powers/enable the wl12xx/wl18xx
       chip.  This is required when connected via SPI.
 
-
   ref-clock-frequency:
     $ref: /schemas/types.yaml#/definitions/uint32
     description: Reference clock frequency.
diff --git a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
index 5d3f48a001b7..f516db47ab20 100644
--- a/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
+++ b/Documentation/devicetree/bindings/pci/altr,pcie-root-port.yaml
@@ -93,7 +93,6 @@ allOf:
         reg-names:
           minItems: 3
 
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/pci/loongson.yaml b/Documentation/devicetree/bindings/pci/loongson.yaml
index 1988465e73a1..e5bba63aa947 100644
--- a/Documentation/devicetree/bindings/pci/loongson.yaml
+++ b/Documentation/devicetree/bindings/pci/loongson.yaml
@@ -32,7 +32,6 @@ properties:
     minItems: 1
     maxItems: 3
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
index 6c6d828ce964..def513d29d26 100644
--- a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -121,7 +121,6 @@ allOf:
             - const: dma2
             - const: dma3
 
-
 unevaluatedProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
index 5f432452c815..33c80626e8ec 100644
--- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -16,7 +16,6 @@ properties:
   compatible:
     const: starfive,jh7110-pcie
 
-
   reg:
     maxItems: 2
 
diff --git a/Documentation/devicetree/bindings/pci/versatile.yaml b/Documentation/devicetree/bindings/pci/versatile.yaml
index 294c7cd84b37..d30b8849db91 100644
--- a/Documentation/devicetree/bindings/pci/versatile.yaml
+++ b/Documentation/devicetree/bindings/pci/versatile.yaml
@@ -90,5 +90,4 @@ examples:
           <0x0000 0 0 4 &sic 28>;
     };
 
-
 ...
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
index a1b55168e050..863a1a446739 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml
@@ -35,7 +35,6 @@ properties:
       - qcom,sm8350-qmp-usb3-uni-phy
       - qcom,x1e80100-qmp-usb3-uni-phy
 
-
   reg:
     maxItems: 1
 
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
index 1283a588416d..a2e609b066ee 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml
@@ -116,7 +116,6 @@ patternProperties:
                 input-schmitt-enable: false
                 input-schmitt-disable: false
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
index a438db8884f2..96e7b6995273 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml
@@ -58,7 +58,6 @@ patternProperties:
             - description: |
                 "pad_setting" indicates the pad configuration value to be applied.
 
-
     required:
       - fsl,pins
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
index 4009501b3414..63e96d60bfaa 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml
@@ -142,7 +142,6 @@ examples:
         interrupt-controller;
         #interrupt-cells = <2>;
 
-
         blsp1-i2c1-default-state {
             pins = "gpio24", "gpio25";
             function = "blsp_i2c1";
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
index f4cf2ce86fcd..d3e4926034a7 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml
@@ -66,7 +66,6 @@ $defs:
           Specify the alternative function to be configured for the specified
           pins.
 
-
 allOf:
   - $ref: qcom,lpass-lpi-common.yaml#
 
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
index ddeaeaa9a450..5a57a59cc1e5 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml
@@ -88,7 +88,6 @@ $defs:
                 uim2_present, uim2_reset, unused1, unused2, usb_phy, vfr_1, vsense_trigger,
                 wlan1_adc0, wlan1_adc1, wlan2_adc0, wlan2_adc1, wsa_clk, wsa_data ]
 
-
     required:
       - pins
 
diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
index 737eb4e14090..8203c3c46cc7 100644
--- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-ports.yaml
@@ -65,7 +65,6 @@ patternProperties:
       - '#gpio-cells'
       - gpio-ranges
 
-
 additionalProperties:
   anyOf:
     - type: object
@@ -150,7 +149,6 @@ examples:
                     pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
             };
 
-
             /*
              * I2c master: both SDA and SCL pins need bi-directional operations
              * Pin #4 on port #1 is configured as alternate function #1.
@@ -162,7 +160,6 @@ examples:
                     pinmux = <RZA1_PINMUX(1, 4, 1)>, <RZA1_PINMUX(1, 5, 1)>;
             };
 
-
             /*
              * Multi-function timer input and output compare pins.
              */
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index f3258f2fd3a4..3f14eab01c54 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -32,7 +32,6 @@ description: |
     | | |     |   |   |          -------
     UART0     UART1 --
 
-
   The big MUX in the diagram only has 7 different ways of mapping peripherals
   on the left to pins on the right. StarFive calls the 7 configurations "signal
   groups".
diff --git a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
index 4c74cc78729e..3e8689019251 100644
--- a/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/mt6360_charger.yaml
@@ -21,7 +21,6 @@ properties:
     description: Maximum CHGIN regulation voltage in uV.
     enum: [ 5500000, 6500000, 11000000, 14500000 ]
 
-
   usb-otg-vbus-regulator:
     type: object
     description: OTG boost regulator.
diff --git a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
index 994fac12c8da..4f19744844e9 100644
--- a/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
+++ b/Documentation/devicetree/bindings/power/supply/stericsson,ab8500-charger.yaml
@@ -65,7 +65,6 @@ properties:
           - const: vbus_v
           - const: usb_charger_c
 
-
 required:
   - compatible
   - monitored-battery
diff --git a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
index 1b192e197b11..1197858e431f 100644
--- a/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
+++ b/Documentation/devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml
@@ -55,7 +55,6 @@ properties:
   resets:
     maxItems: 1
 
-
 allOf:
   - $ref: pwm.yaml#
 
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
index b73762e151bb..84546fec3b18 100644
--- a/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml
@@ -55,7 +55,6 @@ properties:
       delay time 0us, 10us, 20us, 40us. If this property is missing then keep
       in chip default.
 
-
   richtek,switch-freq-select:
     $ref: /schemas/types.yaml#/definitions/uint8
     enum: [0, 1, 2]
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
index a492f74a8608..a927551356e6 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml
@@ -79,7 +79,6 @@ properties:
       It should be set as 3 (Single-Core mode) which is also the default if
       omitted.
 
-
 # R5F Processor Child Nodes:
 # ==========================
 
@@ -167,7 +166,6 @@ patternProperties:
           - description: region reserved for firmware image sections
         additionalItems: true
 
-
 # Optional properties:
 # --------------------
 # The following properties are optional properties for each of the R5F cores:
diff --git a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
index 1db08ce9ae27..68640abacd95 100644
--- a/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
+++ b/Documentation/devicetree/bindings/reset/ti,sci-reset.yaml
@@ -40,7 +40,6 @@ properties:
       Please see https://software-dl.ti.com/tisci/esd/latest/index.html for
       protocol documentation for the values to be used for different devices.
 
-
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
index 0877eb44f9ed..f501fc7691c6 100644
--- a/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
+++ b/Documentation/devicetree/bindings/rng/inside-secure,safexcel-eip76.yaml
@@ -44,7 +44,6 @@ properties:
       - const: core
       - const: reg
 
-
 allOf:
   - if:
       properties:
@@ -58,7 +57,6 @@ allOf:
       required:
         - interrupts
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
index cf0f38dbbe0d..2c06d869fdb5 100644
--- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml
@@ -30,7 +30,6 @@ properties:
     $ref: /schemas/types.yaml#/definitions/string
     enum: [host, slave]
 
-
 patternProperties:
   '^data\-only@[a-f0-9]+$':
     type: object
diff --git a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
index a10326a9683d..5267cfe92572 100644
--- a/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
+++ b/Documentation/devicetree/bindings/soc/mediatek/mediatek,mutex.yaml
@@ -91,7 +91,6 @@ allOf:
       required:
         - clocks
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
index abf1adca0773..668b943db173 100644
--- a/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
+++ b/Documentation/devicetree/bindings/soc/microchip/atmel,at91rm9200-tcb.yaml
@@ -105,7 +105,6 @@ patternProperties:
 
     additionalProperties: false
 
-
 allOf:
   - if:
       properties:
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
index dca5e27b8233..0b8e3294c83e 100644
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.yaml
@@ -317,7 +317,6 @@ allOf:
       properties:
         clocks: false
 
-
 examples:
   - |
     #include <dt-bindings/clock/rk3399-cru.h>
diff --git a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
index b5336bcbfb01..d97e88433d2f 100644
--- a/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
+++ b/Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml
@@ -11,7 +11,6 @@ maintainers:
   - Suman Anna <s-anna@ti.com>
 
 description: |+
-
   The Programmable Real-Time Unit and Industrial Communication Subsystem
   (PRU-ICSS a.k.a. PRUSS) is present on various TI SoCs such as AM335x, AM437x,
   Keystone 66AK2G, OMAP-L138/DA850 etc. A PRUSS consists of dual 32-bit RISC
@@ -44,7 +43,6 @@ description: |+
   integration within the IP and the SoC. These nodes are described in the
   following sections.
 
-
   PRU-ICSS Node
   ==============
   Each PRU-ICSS instance is represented as its own node with the individual PRU
@@ -54,7 +52,6 @@ description: |+
 
   See ../../mfd/syscon.yaml for generic SysCon binding details.
 
-
 properties:
   $nodename:
     pattern: "^(pruss|icssg)@[0-9a-f]+$"
diff --git a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
index ea62e51aba90..9a7ff50a0a22 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau1372.yaml
@@ -4,7 +4,6 @@
 $id: http://devicetree.org/schemas/sound/adi,adau1372.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-
 title: Analog Devices ADAU1372 CODEC
 
 maintainers:
diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
index 12f60507aed7..11f59c29b575 100644
--- a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
+++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
@@ -4,7 +4,6 @@
 $id: http://devicetree.org/schemas/sound/adi,adau7118.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-
 title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter
 
 maintainers:
diff --git a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
index 7bb6c5dff786..9435f395403a 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip,i2s-tdm.yaml
@@ -135,7 +135,6 @@ properties:
       the direction (input/output) needs to be dynamically adjusted.
     type: boolean
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
index 5cdb8bcc687b..52e3f1f900c4 100644
--- a/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/rockchip,rk3328-codec.yaml
@@ -8,10 +8,10 @@ title: Rockchip rk3328 internal codec
 
 maintainers:
   - Heiko Stuebner <heiko@sntech.de>
+
 allOf:
   - $ref: dai-common.yaml#
 
-
 properties:
   compatible:
     const: rockchip,rk3328-codec
diff --git a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
index cbc7ba37362a..67586ba3e0a0 100644
--- a/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
+++ b/Documentation/devicetree/bindings/sound/samsung,tm2.yaml
@@ -30,7 +30,6 @@ properties:
       - items:
           - description: Phandle to the HDMI transmitter node.
 
-
   samsung,audio-routing:
     description: |
       List of the connections between audio components; each entry is
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
index 85e937e34962..10299064cbc6 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320dac3100.yaml
@@ -84,7 +84,6 @@ properties:
     description: gpio pin number used for codec reset
     deprecated: true
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
index 4cfa66f62681..089b67384797 100644
--- a/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
+++ b/Documentation/devicetree/bindings/sound/wlf,wm8903.yaml
@@ -75,7 +75,6 @@ properties:
   DCVDD-supply:
     description: Digital core supply regulator for the DCVDD pin.
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
index 9ea2ea3a7599..adf208b7a5b9 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra-timer.yaml
@@ -100,7 +100,6 @@ properties:
     items:
       - const: timer
 
-
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
index 76516e18e042..1d0bd36907ed 100644
--- a/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
+++ b/Documentation/devicetree/bindings/timer/nvidia,tegra186-timer.yaml
@@ -15,7 +15,6 @@ description: >
   reference generated by USEC, TSC or either clk_m or OSC. Each TMR can be
   programmed to generate one-shot, periodic, or watchdog interrupts.
 
-
 properties:
   compatible:
     oneOf:
diff --git a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
index 6d3ef364672e..6d3fa2bc9cee 100644
--- a/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml
@@ -28,7 +28,6 @@ properties:
               - qcom,pm4125-typec
           - const: qcom,pmi632-typec
 
-
   connector:
     type: object
     $ref: /schemas/connector/usb-connector.yaml#
-- 
2.51.0

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2025-10-23 14:57:40 

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Mark Brown <broonie@kernel.org>
Date: 2025-10-23 15:07:17 

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.
Acked-by: Mark Brown <broonie@kernel.org>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Guenter Roeck <linux@roeck-us.net>
Date: 2025-10-23 15:42:26 

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Uwe Kleine-König <ukleinek@kernel.org>
Date: 2025-10-23 16:11:20 

Hello Rob,

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
 .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml     | 1 -
I have nothing pending for this file, and even if, any conflict is
likely trivial. So feel free to take this change via your tree.

Acked-by: Uwe Kleine-König <ukleinek@kernel.org> # for allwinner,sun4i-a10-pwm.yaml

Best regards
Uwe

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Philipp Zabel <p.zabel@pengutronix.de>
Date: 2025-10-23 16:19:06 

On Do, 2025-10-23 at 09:37 -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
[...]
 Documentation/devicetree/bindings/reset/ti,sci-reset.yaml    | 1 -
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>

regards
Philipp

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Jonathan Cameron <jonathan.cameron@huawei.com>
Date: 2025-10-23 17:03:45 

On Thu, 23 Oct 2025 09:37:56 -0500
"Rob Herring (Arm)" [off-list ref] wrote:

Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Bartosz Golaszewski <hidden>
Date: 2025-10-24 07:56:20 

On Thu, Oct 23, 2025 at 4:40 PM Rob Herring (Arm) [off-list ref] wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
For GPIO:

Acked-by: Bartosz Golaszewski <redacted>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Andi Shyti <andi.shyti@kernel.org>
Date: 2025-10-24 10:30:42 

Hi Rob,

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Andi Shyti <andi.shyti@kernel.org>

Thanks,
Andi

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Vinod Koul <vkoul@kernel.org>
Date: 2025-10-24 14:11:45 

On 23-10-25, 09:37, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Vinod Koul <vkoul@kernel.org>

-- 
~Vinod

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Georgi Djakov <djakov@kernel.org>
Date: 2025-10-24 14:59:32 

On 10/23/25 5:37 PM, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
[..]>   .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
Acked-by: Georgi Djakov <djakov@kernel.org>

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Mathieu Poirier <mathieu.poirier@linaro.org>
Date: 2025-10-24 15:01:11 

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> # remoteproc

Re: [PATCH] dt-bindings: Remove extra blank lines

From: Lee Jones <lee@kernel.org>
Date: 2025-10-24 16:08:49 

On Thu, 23 Oct 2025, Rob Herring (Arm) wrote:

Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/.yamllint                  | 2 +-
 Documentation/devicetree/bindings/arm/psci.yaml              | 1 -
 .../bindings/clock/allwinner,sun4i-a10-gates-clk.yaml        | 1 -
 .../devicetree/bindings/clock/renesas,cpg-mssr.yaml          | 1 -
 .../devicetree/bindings/clock/xlnx,clocking-wizard.yaml      | 1 -
 .../display/allwinner,sun4i-a10-display-frontend.yaml        | 1 -
 .../devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml | 1 -
 .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml       | 1 -
 .../devicetree/bindings/display/amlogic,meson-vpu.yaml       | 1 -
 .../devicetree/bindings/display/bridge/adi,adv7511.yaml      | 1 -
 .../devicetree/bindings/display/bridge/lvds-codec.yaml       | 1 -
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml | 1 -
 .../devicetree/bindings/display/ilitek,ili9486.yaml          | 1 -
 Documentation/devicetree/bindings/display/msm/gpu.yaml       | 1 -
 .../devicetree/bindings/display/panel/panel-timing.yaml      | 1 -
 .../devicetree/bindings/display/panel/tpo,tpg110.yaml        | 1 -
 .../devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml | 1 -
 .../devicetree/bindings/display/simple-framebuffer.yaml      | 1 -
 .../devicetree/bindings/dma/snps,dma-spear1340.yaml          | 1 -
 Documentation/devicetree/bindings/dma/stericsson,dma40.yaml  | 1 -
 .../devicetree/bindings/dma/stm32/st,stm32-dma.yaml          | 1 -
 Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml   | 1 -
 .../devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml       | 1 -
 Documentation/devicetree/bindings/fpga/fpga-region.yaml      | 5 -----
 .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml        | 1 -
 .../devicetree/bindings/gpio/fairchild,74hc595.yaml          | 1 -
 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml     | 1 -
 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml    | 1 -
 Documentation/devicetree/bindings/hwmon/national,lm90.yaml   | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml       | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml     | 1 -
 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml     | 1 -
 .../devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml         | 1 -
 Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml  | 2 --
 Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml   | 1 -
 .../devicetree/bindings/iio/adc/cosmic,10001-adc.yaml        | 1 -
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml  | 1 -
 .../devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml     | 1 -
 .../devicetree/bindings/iio/afe/voltage-divider.yaml         | 1 -
 .../devicetree/bindings/iio/frequency/adi,admv4420.yaml      | 1 -
 .../devicetree/bindings/iio/pressure/murata,zpa2326.yaml     | 1 -
 .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml    | 1 -
 .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml     | 1 -
 Documentation/devicetree/bindings/input/ti,drv266x.yaml      | 1 -
 .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
 .../devicetree/bindings/interrupt-controller/arm,gic-v3.yaml | 1 -
 .../bindings/interrupt-controller/aspeed,ast2700-intc.yaml   | 1 -
 .../bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml     | 1 -
 .../bindings/interrupt-controller/loongson,liointc.yaml      | 1 -
 .../bindings/interrupt-controller/mediatek,mtk-cirq.yaml     | 1 -
 .../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml | 1 -
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml        | 4 ----
 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml       | 1 -
 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml     | 1 -
 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml | 1 -
 Documentation/devicetree/bindings/media/amphion,vpu.yaml     | 1 -
 Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml | 2 --
 .../devicetree/bindings/media/i2c/techwell,tw9900.yaml       | 1 -
 Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 1 -
 .../devicetree/bindings/media/qcom,sc8280xp-camss.yaml       | 1 -
 .../bindings/media/samsung,exynos4212-fimc-is.yaml           | 1 -
 .../devicetree/bindings/media/samsung,s5pv210-jpeg.yaml      | 1 -
 Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml  | 1 -
 .../devicetree/bindings/media/video-interface-devices.yaml   | 4 ----
 .../memory-controllers/qcom,ebi2-peripheral-props.yaml       | 1 -
 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 1 -
Acked-by: Lee Jones <lee@kernel.org>

 .../devicetree/bindings/mtd/amlogic,meson-nand.yaml          | 1 -
 .../devicetree/bindings/mtd/marvell,nand-controller.yaml     | 1 -
 Documentation/devicetree/bindings/mux/mux-controller.yaml    | 1 -
 .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml   | 2 --
 Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml     | 1 -
 .../devicetree/bindings/net/brcm,mdio-mux-iproc.yaml         | 1 -
 .../devicetree/bindings/net/cortina,gemini-ethernet.yaml     | 1 -
 Documentation/devicetree/bindings/net/fsl,gianfar.yaml       | 2 --
 .../devicetree/bindings/net/mdio-mux-multiplexer.yaml        | 1 -
 Documentation/devicetree/bindings/net/qcom,ipa.yaml          | 1 -
 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml    | 1 -
 .../devicetree/bindings/net/wireless/ti,wlcore.yaml          | 1 -
 .../devicetree/bindings/pci/altr,pcie-root-port.yaml         | 1 -
 Documentation/devicetree/bindings/pci/loongson.yaml          | 1 -
 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 1 -
 .../devicetree/bindings/pci/starfive,jh7110-pcie.yaml        | 1 -
 Documentation/devicetree/bindings/pci/versatile.yaml         | 1 -
 .../bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 1 -
 .../devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml   | 1 -
 .../devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml        | 1 -
 .../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml     | 1 -
 .../bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml      | 1 -
 .../devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml        | 1 -
 .../devicetree/bindings/pinctrl/renesas,rza1-ports.yaml      | 3 ---
 .../devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 1 -
 .../devicetree/bindings/power/supply/mt6360_charger.yaml     | 1 -
 .../bindings/power/supply/stericsson,ab8500-charger.yaml     | 1 -
 .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml     | 1 -
 .../bindings/regulator/richtek,rt6245-regulator.yaml         | 1 -
 .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml      | 2 --
 Documentation/devicetree/bindings/reset/ti,sci-reset.yaml    | 1 -
 .../bindings/rng/inside-secure,safexcel-eip76.yaml           | 2 --
 .../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml     | 1 -
 .../devicetree/bindings/soc/mediatek/mediatek,mutex.yaml     | 1 -
 .../bindings/soc/microchip/atmel,at91rm9200-tcb.yaml         | 1 -
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml      | 1 -
 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml       | 3 ---
 Documentation/devicetree/bindings/sound/adi,adau1372.yaml    | 1 -
 Documentation/devicetree/bindings/sound/adi,adau7118.yaml    | 1 -
 .../devicetree/bindings/sound/rockchip,i2s-tdm.yaml          | 1 -
 .../devicetree/bindings/sound/rockchip,rk3328-codec.yaml     | 2 +-
 Documentation/devicetree/bindings/sound/samsung,tm2.yaml     | 1 -
 .../devicetree/bindings/sound/ti,tlv320dac3100.yaml          | 1 -
 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml      | 1 -
 .../devicetree/bindings/timer/nvidia,tegra-timer.yaml        | 1 -
 .../devicetree/bindings/timer/nvidia,tegra186-timer.yaml     | 1 -
 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml   | 1 -
 116 files changed, 2 insertions(+), 136 deletions(-)
-- 
Lee Jones [李琼斯]





  

    
Re: [PATCH] dt-bindings: Remove extra blank lines

    

      From: Sebastian Reichel <hidden>

      Date: 2025-10-24 23:24:26 
    

  

  
Hi,

On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 .../devicetree/bindings/power/supply/mt6360_charger.yaml     | 1 -
 .../bindings/power/supply/stericsson,ab8500-charger.yaml     | 1 -
Acked-by: Sebastian Reichel <redacted>

-- Sebastian





  

    
Re: [PATCH] dt-bindings: Remove extra blank lines

    

      From: Manivannan Sadhasivam <mani@kernel.org>

      Date: 2025-10-26 15:33:33 
    

  

  
On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/.yamllint                  | 2 +-
 Documentation/devicetree/bindings/arm/psci.yaml              | 1 -
 .../bindings/clock/allwinner,sun4i-a10-gates-clk.yaml        | 1 -
 .../devicetree/bindings/clock/renesas,cpg-mssr.yaml          | 1 -
 .../devicetree/bindings/clock/xlnx,clocking-wizard.yaml      | 1 -
 .../display/allwinner,sun4i-a10-display-frontend.yaml        | 1 -
 .../devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml | 1 -
 .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml       | 1 -
 .../devicetree/bindings/display/amlogic,meson-vpu.yaml       | 1 -
 .../devicetree/bindings/display/bridge/adi,adv7511.yaml      | 1 -
 .../devicetree/bindings/display/bridge/lvds-codec.yaml       | 1 -
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml | 1 -
 .../devicetree/bindings/display/ilitek,ili9486.yaml          | 1 -
 Documentation/devicetree/bindings/display/msm/gpu.yaml       | 1 -
 .../devicetree/bindings/display/panel/panel-timing.yaml      | 1 -
 .../devicetree/bindings/display/panel/tpo,tpg110.yaml        | 1 -
 .../devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml | 1 -
 .../devicetree/bindings/display/simple-framebuffer.yaml      | 1 -
 .../devicetree/bindings/dma/snps,dma-spear1340.yaml          | 1 -
 Documentation/devicetree/bindings/dma/stericsson,dma40.yaml  | 1 -
 .../devicetree/bindings/dma/stm32/st,stm32-dma.yaml          | 1 -
 Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml   | 1 -
 .../devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml       | 1 -
 Documentation/devicetree/bindings/fpga/fpga-region.yaml      | 5 -----
 .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml        | 1 -
 .../devicetree/bindings/gpio/fairchild,74hc595.yaml          | 1 -
 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml     | 1 -
 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml    | 1 -
 Documentation/devicetree/bindings/hwmon/national,lm90.yaml   | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml       | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml     | 1 -
 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml     | 1 -
 .../devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml         | 1 -
 Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml  | 2 --
 Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml   | 1 -
 .../devicetree/bindings/iio/adc/cosmic,10001-adc.yaml        | 1 -
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml  | 1 -
 .../devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml     | 1 -
 .../devicetree/bindings/iio/afe/voltage-divider.yaml         | 1 -
 .../devicetree/bindings/iio/frequency/adi,admv4420.yaml      | 1 -
 .../devicetree/bindings/iio/pressure/murata,zpa2326.yaml     | 1 -
 .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml    | 1 -
 .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml     | 1 -
 Documentation/devicetree/bindings/input/ti,drv266x.yaml      | 1 -
 .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
 .../devicetree/bindings/interrupt-controller/arm,gic-v3.yaml | 1 -
 .../bindings/interrupt-controller/aspeed,ast2700-intc.yaml   | 1 -
 .../bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml     | 1 -
 .../bindings/interrupt-controller/loongson,liointc.yaml      | 1 -
 .../bindings/interrupt-controller/mediatek,mtk-cirq.yaml     | 1 -
 .../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml | 1 -
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml        | 4 ----
 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml       | 1 -
 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml     | 1 -
 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml | 1 -
 Documentation/devicetree/bindings/media/amphion,vpu.yaml     | 1 -
 Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml | 2 --
 .../devicetree/bindings/media/i2c/techwell,tw9900.yaml       | 1 -
 Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 1 -
 .../devicetree/bindings/media/qcom,sc8280xp-camss.yaml       | 1 -
 .../bindings/media/samsung,exynos4212-fimc-is.yaml           | 1 -
 .../devicetree/bindings/media/samsung,s5pv210-jpeg.yaml      | 1 -
 Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml  | 1 -
 .../devicetree/bindings/media/video-interface-devices.yaml   | 4 ----
 .../memory-controllers/qcom,ebi2-peripheral-props.yaml       | 1 -
 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 1 -
 .../devicetree/bindings/mtd/amlogic,meson-nand.yaml          | 1 -
 .../devicetree/bindings/mtd/marvell,nand-controller.yaml     | 1 -
 Documentation/devicetree/bindings/mux/mux-controller.yaml    | 1 -
 .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml   | 2 --
 Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml     | 1 -
 .../devicetree/bindings/net/brcm,mdio-mux-iproc.yaml         | 1 -
 .../devicetree/bindings/net/cortina,gemini-ethernet.yaml     | 1 -
 Documentation/devicetree/bindings/net/fsl,gianfar.yaml       | 2 --
 .../devicetree/bindings/net/mdio-mux-multiplexer.yaml        | 1 -
 Documentation/devicetree/bindings/net/qcom,ipa.yaml          | 1 -
 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml    | 1 -
 .../devicetree/bindings/net/wireless/ti,wlcore.yaml          | 1 -
 .../devicetree/bindings/pci/altr,pcie-root-port.yaml         | 1 -
 Documentation/devicetree/bindings/pci/loongson.yaml          | 1 -
 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 1 -
 .../devicetree/bindings/pci/starfive,jh7110-pcie.yaml        | 1 -

Acked-by: Manivannan Sadhasivam <mani@kernel.org> # For PCI controller bindings

- Mani

-- 
மணிவண்ணன் சதாசிவம்





  

    
Re: [PATCH] dt-bindings: Remove extra blank lines

    

      From: Xu Yilun <hidden>

      Date: 2025-10-27 01:50:23 
    

  

  
On Thu, Oct 23, 2025 at 09:37:56AM -0500, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[...]

 Documentation/devicetree/bindings/fpga/fpga-region.yaml      | 5 -----
Acked-by: Xu Yilun <yilun.xu@intel.com>





  

    
Re: [PATCH] dt-bindings: Remove extra blank lines

    

      From: Hal Feng <hidden>

      Date: 2025-10-31 06:46:56 
    

  

  
On 10/23/2025 10:37 PM, Rob Herring (Arm) wrote:
Generally at most 1 blank line is the standard style for DT schema
files. Remove the few cases with more than 1 so that the yamllint check
for this can be enabled.

Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
---
 Documentation/devicetree/bindings/.yamllint                  | 2 +-
 Documentation/devicetree/bindings/arm/psci.yaml              | 1 -
 .../bindings/clock/allwinner,sun4i-a10-gates-clk.yaml        | 1 -
 .../devicetree/bindings/clock/renesas,cpg-mssr.yaml          | 1 -
 .../devicetree/bindings/clock/xlnx,clocking-wizard.yaml      | 1 -
 .../display/allwinner,sun4i-a10-display-frontend.yaml        | 1 -
 .../devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml | 1 -
 .../bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml       | 1 -
 .../devicetree/bindings/display/amlogic,meson-vpu.yaml       | 1 -
 .../devicetree/bindings/display/bridge/adi,adv7511.yaml      | 1 -
 .../devicetree/bindings/display/bridge/lvds-codec.yaml       | 1 -
 .../devicetree/bindings/display/bridge/toshiba,tc358767.yaml | 1 -
 .../devicetree/bindings/display/ilitek,ili9486.yaml          | 1 -
 Documentation/devicetree/bindings/display/msm/gpu.yaml       | 1 -
 .../devicetree/bindings/display/panel/panel-timing.yaml      | 1 -
 .../devicetree/bindings/display/panel/tpo,tpg110.yaml        | 1 -
 .../devicetree/bindings/display/rockchip/rockchip,dw-dp.yaml | 1 -
 .../devicetree/bindings/display/simple-framebuffer.yaml      | 1 -
 .../devicetree/bindings/dma/snps,dma-spear1340.yaml          | 1 -
 Documentation/devicetree/bindings/dma/stericsson,dma40.yaml  | 1 -
 .../devicetree/bindings/dma/stm32/st,stm32-dma.yaml          | 1 -
 Documentation/devicetree/bindings/edac/apm,xgene-edac.yaml   | 1 -
 .../devicetree/bindings/firmware/qemu,fw-cfg-mmio.yaml       | 1 -
 Documentation/devicetree/bindings/fpga/fpga-region.yaml      | 5 -----
 .../devicetree/bindings/gpio/brcm,xgs-iproc-gpio.yaml        | 1 -
 .../devicetree/bindings/gpio/fairchild,74hc595.yaml          | 1 -
 Documentation/devicetree/bindings/hwmon/adi,ltc2947.yaml     | 1 -
 Documentation/devicetree/bindings/hwmon/adi,max31827.yaml    | 1 -
 Documentation/devicetree/bindings/hwmon/national,lm90.yaml   | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tmp513.yaml       | 1 -
 Documentation/devicetree/bindings/hwmon/ti,tps23861.yaml     | 1 -
 Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml     | 1 -
 .../devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml         | 1 -
 Documentation/devicetree/bindings/i2c/tsd,mule-i2c-mux.yaml  | 2 --
 Documentation/devicetree/bindings/iio/adc/adi,ad7380.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ad7949.yaml    | 1 -
 Documentation/devicetree/bindings/iio/adc/adi,ade9000.yaml   | 1 -
 .../devicetree/bindings/iio/adc/cosmic,10001-adc.yaml        | 1 -
 Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml  | 1 -
 .../devicetree/bindings/iio/adc/x-powers,axp209-adc.yaml     | 1 -
 .../devicetree/bindings/iio/afe/voltage-divider.yaml         | 1 -
 .../devicetree/bindings/iio/frequency/adi,admv4420.yaml      | 1 -
 .../devicetree/bindings/iio/pressure/murata,zpa2326.yaml     | 1 -
 .../devicetree/bindings/iio/proximity/semtech,sx9324.yaml    | 1 -
 .../devicetree/bindings/iio/temperature/adi,ltc2983.yaml     | 1 -
 Documentation/devicetree/bindings/input/ti,drv266x.yaml      | 1 -
 .../devicetree/bindings/interconnect/qcom,rpmh.yaml          | 1 -
 .../devicetree/bindings/interrupt-controller/arm,gic-v3.yaml | 1 -
 .../bindings/interrupt-controller/aspeed,ast2700-intc.yaml   | 1 -
 .../bindings/interrupt-controller/fsl,vf610-mscm-ir.yaml     | 1 -
 .../bindings/interrupt-controller/loongson,liointc.yaml      | 1 -
 .../bindings/interrupt-controller/mediatek,mtk-cirq.yaml     | 1 -
 .../bindings/interrupt-controller/mscc,ocelot-icpu-intr.yaml | 1 -
 Documentation/devicetree/bindings/iommu/arm,smmu.yaml        | 4 ----
 Documentation/devicetree/bindings/mailbox/arm,mhu.yaml       | 1 -
 Documentation/devicetree/bindings/mailbox/arm,mhuv2.yaml     | 1 -
 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml | 1 -
 Documentation/devicetree/bindings/media/amphion,vpu.yaml     | 1 -
 Documentation/devicetree/bindings/media/i2c/adi,adv7604.yaml | 2 --
 .../devicetree/bindings/media/i2c/techwell,tw9900.yaml       | 1 -
 Documentation/devicetree/bindings/media/nxp,imx8-jpeg.yaml   | 1 -
 .../devicetree/bindings/media/qcom,sc8280xp-camss.yaml       | 1 -
 .../bindings/media/samsung,exynos4212-fimc-is.yaml           | 1 -
 .../devicetree/bindings/media/samsung,s5pv210-jpeg.yaml      | 1 -
 Documentation/devicetree/bindings/media/st,stm32-dma2d.yaml  | 1 -
 .../devicetree/bindings/media/video-interface-devices.yaml   | 4 ----
 .../memory-controllers/qcom,ebi2-peripheral-props.yaml       | 1 -
 Documentation/devicetree/bindings/mfd/stericsson,ab8500.yaml | 1 -
 .../devicetree/bindings/mtd/amlogic,meson-nand.yaml          | 1 -
 .../devicetree/bindings/mtd/marvell,nand-controller.yaml     | 1 -
 Documentation/devicetree/bindings/mux/mux-controller.yaml    | 1 -
 .../devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml   | 2 --
 Documentation/devicetree/bindings/net/brcm,bcmgenet.yaml     | 1 -
 .../devicetree/bindings/net/brcm,mdio-mux-iproc.yaml         | 1 -
 .../devicetree/bindings/net/cortina,gemini-ethernet.yaml     | 1 -
 Documentation/devicetree/bindings/net/fsl,gianfar.yaml       | 2 --
 .../devicetree/bindings/net/mdio-mux-multiplexer.yaml        | 1 -
 Documentation/devicetree/bindings/net/qcom,ipa.yaml          | 1 -
 Documentation/devicetree/bindings/net/ti,cpsw-switch.yaml    | 1 -
 .../devicetree/bindings/net/wireless/ti,wlcore.yaml          | 1 -
 .../devicetree/bindings/pci/altr,pcie-root-port.yaml         | 1 -
 Documentation/devicetree/bindings/pci/loongson.yaml          | 1 -
 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml  | 1 -
 .../devicetree/bindings/pci/starfive,jh7110-pcie.yaml        | 1 -
 Documentation/devicetree/bindings/pci/versatile.yaml         | 1 -
 .../bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml         | 1 -
 .../devicetree/bindings/pinctrl/brcm,bcm21664-pinctrl.yaml   | 1 -
 .../devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml        | 1 -
 .../devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml     | 1 -
 .../bindings/pinctrl/qcom,sm6115-lpass-lpi-pinctrl.yaml      | 1 -
 .../devicetree/bindings/pinctrl/qcom,sm6125-tlmm.yaml        | 1 -
 .../devicetree/bindings/pinctrl/renesas,rza1-ports.yaml      | 3 ---
 .../devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml | 1 -
 .../devicetree/bindings/power/supply/mt6360_charger.yaml     | 1 -
 .../bindings/power/supply/stericsson,ab8500-charger.yaml     | 1 -
 .../devicetree/bindings/pwm/allwinner,sun4i-a10-pwm.yaml     | 1 -
 .../bindings/regulator/richtek,rt6245-regulator.yaml         | 1 -
 .../devicetree/bindings/remoteproc/ti,k3-r5f-rproc.yaml      | 2 --
 Documentation/devicetree/bindings/reset/ti,sci-reset.yaml    | 1 -
 .../bindings/rng/inside-secure,safexcel-eip76.yaml           | 2 --
 .../devicetree/bindings/soc/fsl/cpm_qe/fsl,qe-muram.yaml     | 1 -
 .../devicetree/bindings/soc/mediatek/mediatek,mutex.yaml     | 1 -
 .../bindings/soc/microchip/atmel,at91rm9200-tcb.yaml         | 1 -
 Documentation/devicetree/bindings/soc/rockchip/grf.yaml      | 1 -
 Documentation/devicetree/bindings/soc/ti/ti,pruss.yaml       | 3 ---
 Documentation/devicetree/bindings/sound/adi,adau1372.yaml    | 1 -
 Documentation/devicetree/bindings/sound/adi,adau7118.yaml    | 1 -
 .../devicetree/bindings/sound/rockchip,i2s-tdm.yaml          | 1 -
 .../devicetree/bindings/sound/rockchip,rk3328-codec.yaml     | 2 +-
 Documentation/devicetree/bindings/sound/samsung,tm2.yaml     | 1 -
 .../devicetree/bindings/sound/ti,tlv320dac3100.yaml          | 1 -
 Documentation/devicetree/bindings/sound/wlf,wm8903.yaml      | 1 -
 .../devicetree/bindings/timer/nvidia,tegra-timer.yaml        | 1 -
 .../devicetree/bindings/timer/nvidia,tegra186-timer.yaml     | 1 -
 Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml   | 1 -
 116 files changed, 2 insertions(+), 136 deletions(-)
...

quoted hunk
diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
index 5f432452c815..33c80626e8ec 100644
--- a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
@@ -16,7 +16,6 @@ properties:
   compatible:
     const: starfive,jh7110-pcie
 
-
   reg:
     maxItems: 2
 
...

quoted hunk
diff --git a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
index f3258f2fd3a4..3f14eab01c54 100644
--- a/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/starfive,jh7100-pinctrl.yaml
@@ -32,7 +32,6 @@ description: |
     | | |     |   |   |          -------
     UART0     UART1 --
 
-
   The big MUX in the diagram only has 7 different ways of mapping peripherals
   on the left to pins on the right. StarFive calls the 7 configurations "signal
   groups".
Reviewed-by: Hal Feng <hal.feng@starfivetech.com>

Best regards,
Hal




    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread

          
kprevious message in thread

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help