of: property: add of_graph_get_next_port/port_endpoint()

Started by Kuninori Morimoto on Aug 9, 2024 · 14 messages from 4 authors · Last reply Aug 24, 2024

Series

9 patches, 14 files

+246 −160

Subsystems (12)

Show 9 more

Maintainers (17)

Show 13 more
STALE813d SUPERSEDED

Status: Superseded by v8 (posted 2024-10-24). [go to v8]

Revision v2 (8 revisions archived).

Revisions (8)

open the first message on its own page

  1. [PATCH v2 1/9] of: property: add of_graph_get_next_port()
    Revisions and related patches
    Revisions (8)
  2. [PATCH v2 2/9] of: property: add of_graph_get_next_port_endpoint()
    Revisions and related patches
    Revisions (8)
  3. [PATCH v2 3/9] ASoC: test-component: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  4. [PATCH v2 4/9] ASoC: rcar_snd: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  5. [PATCH v2 5/9] ASoC: audio-graph-card: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  6. [PATCH v2 6/9] ASoC: audio-graph-card2: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  7. [PATCH v2 7/9] gpu: drm: omapdrm: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  8. [PATCH v2 8/9] fbdev: omapfb: use new of_graph functions
    Revisions and related patches
    Revisions (8)
  9. [PATCH v2 9/9] media: xilinx-tpg: use new of_graph functions
    Revisions and related patches
    Revisions (8)
Message details and related content
Hi Rob, Saravana, Tomi

This is v2 patch-set

I have been posting to add new port base for loop function
as below steps.

[o] done
[*] posting (A)
[@] this patch set

	[o] tidyup of_graph_get_endpoint_count()
	[o] replace endpoint func - use endpoint_by_regs()
	[*] replace endpoint func - use for_each()
	[@] add new port function

Because posting [*] patches are under progress, and it and [@] patches
are independent, I try to post this patch-set.

Current Of-graph has "endpoint base" for loop, but doesn't have
"port base" loop. "endpoint base" loop only is not enough.
This patch-set add new "port base" for loop, and use it.

v1 -> v2
	- add each Reviewed-by / Acked-by
	- tidyup/update Kernel Docs
	- use prev as parameter
	- update git-log explanation
	- remove extra changes

Kuninori Morimoto (9):
  of: property: add of_graph_get_next_port()
  of: property: add of_graph_get_next_port_endpoint()
  ASoC: test-component: use new of_graph functions
  ASoC: rcar_snd: use new of_graph functions
  ASoC: audio-graph-card: use new of_graph functions
  ASoC: audio-graph-card2: use new of_graph functions
  gpu: drm: omapdrm: use new of_graph functions
  fbdev: omapfb: use new of_graph functions

21 more lines

[PATCH v2 1/9] of: property: add of_graph_get_next_port()

Message details and related content
We have endpoint base functions
	- of_graph_get_next_device_endpoint()
	- of_graph_get_device_endpoint_count()
	- for_each_of_graph_device_endpoint()

Here, for_each_of_graph_device_endpoint() loop finds each endpoints

	ports {
		port@0 {
(1)			endpoint {...};
		};
		port@1 {
(2)			endpoint {...};
		};
		...
	};

In above case, it finds endpoint as (1) -> (2) -> ...

Basically, user/driver knows which port is used for what, but not in
all cases. For example on flexible/generic driver case, how many ports
are used is not fixed.

For example Sound Generic Card driver which is used from many venders
can't know how many ports are used. Because the driver is very
flexible/generic, it is impossible to know how many ports are used,
it depends on each vender SoC and/or its used board.

And more, the port can have multi endpoints. For example Generic Sound
Card case, it supports many type of connection between CPU / Codec, and
some of them uses multi endpoint in one port.
Then, Generic Sound Card want to handle each connection via "port"
instead of "endpoint".
But, it is very difficult to handle each "port" via
for_each_of_graph_device_endpoint(). Getting "port" by using
of_get_parent() from "endpoint" doesn't work. see below.

	ports {
		port@0 {
(1)			endpoint@0 {...};

46 more lines

diff --git a/drivers/of/property.c b/drivers/of/property.c
index 164d77cb9445..e4d5dfe70104 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -625,6 +625,76 @@ struct device_node *of_graph_get_port_by_id(struct device_node *parent, u32 id)
 }
 EXPORT_SYMBOL(of_graph_get_port_by_id);
 
+/**
+ * of_graph_get_next_ports() - get next ports node.
+ * @parent: pointer to the parent device node
+ * @prev: previous ports node, or NULL to get first
+ *
+ * If "parent" node doesn't have "ports" node, it returns "parent" node itself as "ports" node.
+ *
+ * Return: A 'ports' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_ports(struct device_node *parent,
+					    struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		prev = of_get_child_by_name(parent, "ports");
+
+		/* use parent as its ports of this device if it not exist */
+		if (!prev)
+			prev = of_node_get(parent);
+
+		return prev;
+	}
+
+	do {
+		prev = of_get_next_child(parent, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "ports"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_ports);
+
+/**
+ * of_graph_get_next_port() - get next port node.
+ * @parent: pointer to the parent device node, or parent ports node
+ * @prev: previous port node, or NULL to get first
+ *
+ * Parent device node can be used as @parent whether device node has ports node or not.
+ * It will work same as ports@0 node.
+ *
+ * Return: A 'port' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports __free(device_node) =
+			of_graph_get_next_ports(parent, NULL);
+
+		return of_get_child_by_name(ports, "port");
+	}
+
+	do {
+		prev = of_get_next_child(parent, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "port"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port);
+
 /**
  * of_graph_get_next_endpoint() - get next endpoint node
  * @parent: pointer to the parent device node
@@ -823,6 +893,24 @@ unsigned int of_graph_get_endpoint_count(const struct device_node *np)
 }
 EXPORT_SYMBOL(of_graph_get_endpoint_count);
 
+/**
+ * of_graph_get_port_count() - get the number of port in a device node
+ * @np: pointer to the parent device node
+ *
+ * Return: count of port of this device node
+ */
+unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	struct device_node *port = NULL;
+	int num = 0;
+
+	for_each_of_graph_port(np, port)
+		num++;
+
+	return num;
+}
+EXPORT_SYMBOL(of_graph_get_port_count);
+
 /**
  * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
  * @node: pointer to parent device_node containing graph port/endpoint
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index a4bea62bfa29..a6b91577700a 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -37,14 +37,41 @@ struct of_endpoint {
 	for (child = of_graph_get_next_endpoint(parent, NULL); child != NULL; \
 	     child = of_graph_get_next_endpoint(parent, child))
 
+/**
+ * for_each_of_graph_ports - iterate over every ports in a device node
+ * @parent: parent device node containing ports
+ * @child: loop variable pointing to the current ports node
+ *
+ * When breaking out of the loop, of_node_put(child) has to be called manually.
+ */
+#define for_each_of_graph_ports(parent, child)				\
+	for (child = of_graph_get_next_ports(parent, NULL); child != NULL; \
+	     child = of_graph_get_next_ports(parent, child))
+
+/**
+ * for_each_of_graph_port - iterate over every port in a device or ports node
+ * @parent: parent device or ports node containing port
+ * @child: loop variable pointing to the current port node
+ *
+ * When breaking out of the loop, of_node_put(child) has to be called manually.
+ */
+#define for_each_of_graph_port(parent, child)			\
+	for (child = of_graph_get_next_port(parent, NULL); child != NULL; \
+	     child = of_graph_get_next_port(parent, child))
+
 #ifdef CONFIG_OF
 bool of_graph_is_present(const struct device_node *node);
 int of_graph_parse_endpoint(const struct device_node *node,
 				struct of_endpoint *endpoint);
 unsigned int of_graph_get_endpoint_count(const struct device_node *np);
+unsigned int of_graph_get_port_count(struct device_node *np);
 struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
 struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 					struct device_node *previous);
+struct device_node *of_graph_get_next_ports(struct device_node *parent,
+					    struct device_node *ports);
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *port);
 struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_endpoint(
@@ -73,6 +100,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node
 	return 0;
 }
 
+static inline unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	return 0;
+}
+
 static inline struct device_node *of_graph_get_port_by_id(
 					struct device_node *node, u32 id)
 {
@@ -86,6 +118,20 @@ static inline struct device_node *of_graph_get_next_endpoint(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_next_ports(
+					struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+
+static inline struct device_node *of_graph_get_next_port(
+					struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+
 static inline struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg)
 {
-- 
2.43.0

[PATCH v2 2/9] of: property: add of_graph_get_next_port_endpoint()

Message details and related content
We already have of_graph_get_next_endpoint(), but it is not
intuitive to use.

(X)	node {
(Y)		ports {
			port@0 { endpoint { remote-endpoint = ...; };};
(A1)			port@1 { endpoint { remote-endpoint = ...; };
(A2)				 endpoint { remote-endpoint = ...; };};
(B)			port@2 { endpoint { remote-endpoint = ...; };};
		};
	};

For example, if I want to handle port@1's 2 endpoints (= A1, A2),
I want to use like below

	A1 = of_graph_get_next_endpoint(port1, NULL);
	A2 = of_graph_get_next_endpoint(port1, A1);

But 1st one will be error, because of_graph_get_next_endpoint()
requested "parent" means "node" (X) or "ports" (Y), not "port".
Below are OK

	/* These will be node/ports/port@0/endpoint */
	of_graph_get_next_endpoint(node,  NULL);
	of_graph_get_next_endpoint(ports, NULL);

In other words, we can't handle A1/A2 directly via
of_graph_get_next_endpoint() so far.

There is another non intuitive behavior on of_graph_get_next_endpoint().
In case of if I could get A1 pointer for some way, and if I want to
handle port@1 things, I would like use it like below

	/*
	 * "ep" is now A1, and handle port1 things here,
	 * but we don't know how many endpoints port1 has.
	 *
	 * Because "ep" is non NULL, we can use port1
	 * as of_graph_get_next_endpoint(port1, xxx)
	 */

25 more lines

diff --git a/drivers/of/property.c b/drivers/of/property.c
index e4d5dfe70104..dace154baaab 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -695,6 +695,28 @@ struct device_node *of_graph_get_next_port(struct device_node *parent,
 }
 EXPORT_SYMBOL(of_graph_get_next_port);
 
+/**
+ * of_graph_get_next_port_endpoint() - get next endpoint node in port.
+ * If it reached to end of the port, it will return NULL.
+ * @port: pointer to the target port node
+ * @prev: previous endpoint node, or NULL to get first
+ *
+ * Return: An 'endpoint' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port,
+						    struct device_node *prev)
+{
+	do {
+		prev = of_get_next_child(port, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "endpoint"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port_endpoint);
+
 /**
  * of_graph_get_next_endpoint() - get next endpoint node
  * @parent: pointer to the parent device node
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index a6b91577700a..967ee14a1ff3 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -59,6 +59,17 @@ struct of_endpoint {
 	for (child = of_graph_get_next_port(parent, NULL); child != NULL; \
 	     child = of_graph_get_next_port(parent, child))
 
+/**
+ * for_each_of_graph_port_endpoint - iterate over every endpoint in a port node
+ * @parent: parent port node
+ * @child: loop variable pointing to the current endpoint node
+ *
+ * When breaking out of the loop, of_node_put(child) has to be called manually.
+ */
+#define for_each_of_graph_port_endpoint(parent, child)			\
+		for (child = of_graph_get_next_port_endpoint(parent, NULL); child != NULL; \
+		     child = of_graph_get_next_port_endpoint(parent, child))
+
 #ifdef CONFIG_OF
 bool of_graph_is_present(const struct device_node *node);
 int of_graph_parse_endpoint(const struct device_node *node,
@@ -72,6 +83,8 @@ struct device_node *of_graph_get_next_ports(struct device_node *parent,
 					    struct device_node *ports);
 struct device_node *of_graph_get_next_port(struct device_node *parent,
 					   struct device_node *port);
+struct device_node *of_graph_get_next_port_endpoint(const struct device_node *port,
+						    struct device_node *prev);
 struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_endpoint(
@@ -132,6 +145,13 @@ static inline struct device_node *of_graph_get_next_port(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_next_port_endpoint(
+					const struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+
 static inline struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg)
 {
-- 
2.43.0

[PATCH v2 3/9] ASoC: test-component: use new of_graph functions

Message details and related content
Current test-component.c is using for_each_endpoint_of_node()
for parsing "port", because there was no "port" base loop before.
It has been assuming 1 port has 1 endpoint here.

But now we can use "port" base loop (= for_each_of_graph_port()).
Let's replace for_each function from "endpoint" base to "port" base.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 sound/soc/generic/test-component.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/sound/soc/generic/test-component.c b/sound/soc/generic/test-component.c
index e9e5e235a8a6..36008f3a31b1 100644
--- a/sound/soc/generic/test-component.c
+++ b/sound/soc/generic/test-component.c
@@ -530,7 +530,7 @@ static int test_driver_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct device_node *node = dev->of_node;
-	struct device_node *ep;
+	struct device_node *port;
 	const struct test_adata *adata = of_device_get_match_data(&pdev->dev);
 	struct snd_soc_component_driver *cdriv;
 	struct snd_soc_dai_driver *ddriv;
@@ -600,7 +600,7 @@ static int test_driver_probe(struct platform_device *pdev)
 	}
 
 	i = 0;
-	for_each_endpoint_of_node(node, ep) {
+	for_each_of_graph_port(node, port) {
 		snprintf(dname[i].name, TEST_NAME_LEN, "%s.%d", node->name, i);
 		ddriv[i].name = dname[i].name;
 
-- 
2.43.0

[PATCH v2 4/9] ASoC: rcar_snd: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/sh/rcar/core.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c
index 63b3c8bf0fde..eb146cf836eb 100644
--- a/sound/soc/sh/rcar/core.c
+++ b/sound/soc/sh/rcar/core.c
@@ -1294,11 +1294,8 @@ static int rsnd_dai_of_node(struct rsnd_priv *priv, int *is_graph)
 	/*
 	 * Audio-Graph-Card
 	 */
-	for_each_child_of_node(np, ports) {
-		if (!of_node_name_eq(ports, "ports") &&
-		    !of_node_name_eq(ports, "port"))
-			continue;
-		priv->component_dais[i] = of_graph_get_endpoint_count(ports);
+	for_each_of_graph_ports(np, ports) {
+		priv->component_dais[i] = of_graph_get_port_count(ports);
 		nr += priv->component_dais[i];
 		i++;
 		if (i >= RSND_MAX_COMPONENT) {
@@ -1506,10 +1503,7 @@ static int rsnd_dai_probe(struct rsnd_priv *priv)
 		struct device_node *ports;
 		struct device_node *dai_np;
 
-		for_each_child_of_node(np, ports) {
-			if (!of_node_name_eq(ports, "ports") &&
-			    !of_node_name_eq(ports, "port"))
-				continue;
+		for_each_of_graph_ports(np, ports) {
 			for_each_endpoint_of_node(ports, dai_np) {
 				__rsnd_dai_probe(priv, dai_np, dai_np, 0, dai_i);
 				if (!rsnd_is_gen1(priv) && !rsnd_is_gen2(priv)) {
-- 
2.43.0

[PATCH v2 5/9] ASoC: audio-graph-card: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/generic/audio-graph-card.c | 5 +----
 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 3425fbbcbd7e..040c271e13c6 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -376,10 +376,7 @@ static int __graph_for_each_link(struct simple_util_priv *priv,
 		cpu_ep	 = NULL;
 
 		/* loop for all CPU endpoint */
-		while (1) {
-			cpu_ep = of_get_next_child(cpu_port, cpu_ep);
-			if (!cpu_ep)
-				break;
+		for_each_of_graph_port_endpoint(cpu_port, cpu_ep) {
 
 			/* get codec */
 			codec_ep = of_graph_get_remote_endpoint(cpu_ep);
-- 
2.43.0

[PATCH v2 6/9] ASoC: audio-graph-card2: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/generic/audio-graph-card2.c | 111 ++++++++++++--------------
 1 file changed, 49 insertions(+), 62 deletions(-)
diff --git a/sound/soc/generic/audio-graph-card2.c b/sound/soc/generic/audio-graph-card2.c
index 56f7f946882e..e8ea201dbca3 100644
--- a/sound/soc/generic/audio-graph-card2.c
+++ b/sound/soc/generic/audio-graph-card2.c
@@ -234,8 +234,6 @@ enum graph_type {
 #define GRAPH_NODENAME_DPCM	"dpcm"
 #define GRAPH_NODENAME_C2C	"codec2codec"
 
-#define port_to_endpoint(port) of_get_child_by_name(port, "endpoint")
-
 #define ep_to_port(ep)	of_get_parent(ep)
 static struct device_node *port_to_ports(struct device_node *port)
 {
@@ -351,14 +349,9 @@ static struct device_node *graph_get_next_multi_ep(struct device_node **port)
 	 *	port@1 { rep1 };
 	 * };
 	 */
-	do {
-		*port = of_get_next_child(ports, *port);
-		if (!*port)
-			break;
-	} while (!of_node_name_eq(*port, "port"));
-
+	*port = of_graph_get_next_port(ports, *port);
 	if (*port) {
-		ep  = port_to_endpoint(*port);
+		ep  = of_graph_get_next_port_endpoint(*port, NULL);
 		rep = of_graph_get_remote_endpoint(ep);
 	}
 
@@ -530,67 +523,70 @@ static int graph_parse_node_multi_nm(struct snd_soc_dai_link *dai_link,
 	 *	};
 	 * };
 	 */
-	struct device_node *mcpu_ep		= port_to_endpoint(mcpu_port);
-	struct device_node *mcpu_ep_n		= mcpu_ep;
-	struct device_node *mcpu_port_top	= of_get_next_child(port_to_ports(mcpu_port), NULL);
-	struct device_node *mcpu_ep_top		= port_to_endpoint(mcpu_port_top);
+	struct device_node *mcpu_ep_n;
+	struct device_node *mcpu_ep		= of_graph_get_next_port_endpoint(mcpu_port, NULL);
+	struct device_node *mcpu_ports		= port_to_ports(mcpu_port);
+	struct device_node *mcpu_port_top	= of_graph_get_next_port(mcpu_ports, NULL);
+	struct device_node *mcpu_ep_top		= of_graph_get_next_port_endpoint(mcpu_port_top, NULL);
 	struct device_node *mcodec_ep_top	= of_graph_get_remote_endpoint(mcpu_ep_top);
 	struct device_node *mcodec_port_top	= ep_to_port(mcodec_ep_top);
 	struct device_node *mcodec_ports	= port_to_ports(mcodec_port_top);
 	int nm_max = max(dai_link->num_cpus, dai_link->num_codecs);
-	int ret = -EINVAL;
+	int ret = 0;
 
-	if (cpu_idx > dai_link->num_cpus)
+	if (cpu_idx > dai_link->num_cpus) {
+		ret = -EINVAL;
 		goto mcpu_err;
+	}
 
-	while (1) {
+	for_each_of_graph_port_endpoint(mcpu_port, mcpu_ep_n) {
 		struct device_node *mcodec_ep_n;
 		struct device_node *mcodec_port_i;
 		struct device_node *mcodec_port;
 		int codec_idx;
 
-		if (*nm_idx > nm_max)
-			break;
+		/* ignore 1st ep which is for element */
+		if (mcpu_ep_n == mcpu_ep)
+			continue;
 
-		mcpu_ep_n = of_get_next_child(mcpu_port, mcpu_ep_n);
-		if (!mcpu_ep_n) {
-			ret = 0;
+		if (*nm_idx > nm_max)
 			break;
-		}
 
 		mcodec_ep_n	= of_graph_get_remote_endpoint(mcpu_ep_n);
 		mcodec_port	= ep_to_port(mcodec_ep_n);
 
-		if (mcodec_ports != port_to_ports(mcodec_port))
+		if (mcodec_ports != port_to_ports(mcodec_port)) {
+			ret = -EINVAL;
 			goto mcpu_err;
+		}
 
 		codec_idx = 0;
-		mcodec_port_i = of_get_next_child(mcodec_ports, NULL);
-		while (1) {
-			if (codec_idx > dai_link->num_codecs)
-				goto mcodec_err;
-
-			mcodec_port_i = of_get_next_child(mcodec_ports, mcodec_port_i);
+		ret = -EINVAL;
+		for_each_of_graph_port(mcodec_ports, mcodec_port_i) {
 
-			if (!mcodec_port_i)
-				goto mcodec_err;
+			/* ignore 1st port which is for pair connection */
+			if (mcodec_port_top == mcodec_port_i)
+				continue;
 
-			if (mcodec_port_i == mcodec_port)
+			if (codec_idx > dai_link->num_codecs)
 				break;
 
+			if (mcodec_port_i == mcodec_port) {
+				dai_link->ch_maps[*nm_idx].cpu	 = cpu_idx;
+				dai_link->ch_maps[*nm_idx].codec = codec_idx;
+
+				(*nm_idx)++;
+				ret = 0;
+				break;
+			}
 			codec_idx++;
 		}
-
-		dai_link->ch_maps[*nm_idx].cpu		= cpu_idx;
-		dai_link->ch_maps[*nm_idx].codec	= codec_idx;
-
-		(*nm_idx)++;
-
 		of_node_put(mcodec_port_i);
-mcodec_err:
 		of_node_put(mcodec_port);
 		of_node_put(mcpu_ep_n);
 		of_node_put(mcodec_ep_n);
+		if (ret < 0)
+			break;
 	}
 mcpu_err:
 	of_node_put(mcpu_ep);
@@ -674,7 +670,7 @@ static int graph_parse_node_single(struct simple_util_priv *priv,
 				   struct device_node *port,
 				   struct link_info *li, int is_cpu)
 {
-	struct device_node *ep = port_to_endpoint(port);
+	struct device_node *ep = of_graph_get_next_port_endpoint(port, NULL);
 	int ret = __graph_parse_node(priv, gtype, ep, li, is_cpu, 0);
 
 	of_node_put(ep);
@@ -769,7 +765,7 @@ static void graph_link_init(struct simple_util_priv *priv,
 		of_node_put(port_cpu);
 		port_cpu = ep_to_port(ep_cpu);
 	} else {
-		ep_cpu = port_to_endpoint(port_cpu);
+		ep_cpu = of_graph_get_next_port_endpoint(port_cpu, NULL);
 	}
 	ports_cpu = port_to_ports(port_cpu);
 
@@ -779,7 +775,7 @@ static void graph_link_init(struct simple_util_priv *priv,
 		of_node_put(port_cpu);
 		port_codec = ep_to_port(ep_codec);
 	} else {
-		ep_codec = port_to_endpoint(port_codec);
+		ep_codec = of_graph_get_next_port_endpoint(port_codec, NULL);
 	}
 	ports_codec = port_to_ports(port_codec);
 
@@ -850,7 +846,7 @@ int audio_graph2_link_normal(struct simple_util_priv *priv,
 			     struct link_info *li)
 {
 	struct device_node *cpu_port = lnk;
-	struct device_node *cpu_ep = port_to_endpoint(cpu_port);
+	struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL);
 	struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
 	int ret;
 
@@ -883,7 +879,7 @@ int audio_graph2_link_dpcm(struct simple_util_priv *priv,
 			   struct device_node *lnk,
 			   struct link_info *li)
 {
-	struct device_node *ep = port_to_endpoint(lnk);
+	struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL);
 	struct device_node *rep = of_graph_get_remote_endpoint(ep);
 	struct device_node *cpu_port = NULL;
 	struct device_node *codec_port = NULL;
@@ -1009,7 +1005,7 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv,
 	of_node_get(lnk);
 	port0 = lnk;
 	ports = port_to_ports(port0);
-	port1 = of_get_next_child(ports, lnk);
+	port1 = of_graph_get_next_port(ports, port0);
 
 	/*
 	 * Card2 can use original Codec2Codec settings if DT has.
@@ -1039,8 +1035,8 @@ int audio_graph2_link_c2c(struct simple_util_priv *priv,
 		dai_link->num_c2c_params	= 1;
 	}
 
-	ep0 = port_to_endpoint(port0);
-	ep1 = port_to_endpoint(port1);
+	ep0 = of_graph_get_next_port_endpoint(port0, NULL);
+	ep1 = of_graph_get_next_port_endpoint(port1, NULL);
 
 	codec0_port = of_graph_get_remote_port(ep0);
 	codec1_port = of_graph_get_remote_port(ep1);
@@ -1141,21 +1137,12 @@ static int graph_counter(struct device_node *lnk)
 	 */
 	if (graph_lnk_is_multi(lnk)) {
 		struct device_node *ports = port_to_ports(lnk);
-		struct device_node *port = NULL;
-		int cnt = 0;
 
 		/*
 		 * CPU/Codec = N:M case has many endpoints.
 		 * We can't use of_graph_get_endpoint_count() here
 		 */
-		while(1) {
-			port = of_get_next_child(ports, port);
-			if (!port)
-				break;
-			cnt++;
-		}
-
-		return cnt - 1;
+		return of_graph_get_port_count(ports) - 1;
 	}
 	/*
 	 * Single CPU / Codec
@@ -1169,7 +1156,7 @@ static int graph_count_normal(struct simple_util_priv *priv,
 			      struct link_info *li)
 {
 	struct device_node *cpu_port = lnk;
-	struct device_node *cpu_ep = port_to_endpoint(cpu_port);
+	struct device_node *cpu_ep = of_graph_get_next_port_endpoint(cpu_port, NULL);
 	struct device_node *codec_port = of_graph_get_remote_port(cpu_ep);
 
 	/*
@@ -1197,7 +1184,7 @@ static int graph_count_dpcm(struct simple_util_priv *priv,
 			    struct device_node *lnk,
 			    struct link_info *li)
 {
-	struct device_node *ep = port_to_endpoint(lnk);
+	struct device_node *ep = of_graph_get_next_port_endpoint(lnk, NULL);
 	struct device_node *rport = of_graph_get_remote_port(ep);
 
 	/*
@@ -1239,9 +1226,9 @@ static int graph_count_c2c(struct simple_util_priv *priv,
 {
 	struct device_node *ports = port_to_ports(lnk);
 	struct device_node *port0 = lnk;
-	struct device_node *port1 = of_get_next_child(ports, of_node_get(lnk));
-	struct device_node *ep0 = port_to_endpoint(port0);
-	struct device_node *ep1 = port_to_endpoint(port1);
+	struct device_node *port1 = of_graph_get_next_port(ports, of_node_get(port0));
+	struct device_node *ep0 = of_graph_get_next_port_endpoint(port0, NULL);
+	struct device_node *ep1 = of_graph_get_next_port_endpoint(port1, NULL);
 	struct device_node *codec0 = of_graph_get_remote_port(ep0);
 	struct device_node *codec1 = of_graph_get_remote_port(ep1);
 
-- 
2.43.0

[PATCH v2 7/9] gpu: drm: omapdrm: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/gpu/drm/omapdrm/dss/dpi.c | 3 ++-
 drivers/gpu/drm/omapdrm/dss/sdi.c | 3 ++-
 2 files changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/omapdrm/dss/dpi.c b/drivers/gpu/drm/omapdrm/dss/dpi.c
index 030f997eccd0..b17e77f700dd 100644
--- a/drivers/gpu/drm/omapdrm/dss/dpi.c
+++ b/drivers/gpu/drm/omapdrm/dss/dpi.c
@@ -16,6 +16,7 @@
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
@@ -709,7 +710,7 @@ int dpi_init_port(struct dss_device *dss, struct platform_device *pdev,
 	if (!dpi)
 		return -ENOMEM;
 
-	ep = of_get_next_child(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 
diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 91eaae3b9481..f9ae358e8e52 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -11,6 +11,7 @@
 #include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
@@ -346,7 +347,7 @@ int sdi_init_port(struct dss_device *dss, struct platform_device *pdev,
 	if (!sdi)
 		return -ENOMEM;
 
-	ep = of_get_next_child(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep) {
 		r = 0;
 		goto err_free;
-- 
2.43.0

[PATCH v2 8/9] fbdev: omapfb: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
 drivers/video/fbdev/omap2/omapfb/dss/dpi.c    |  3 +-
 drivers/video/fbdev/omap2/omapfb/dss/dss-of.c | 66 -------------------
 drivers/video/fbdev/omap2/omapfb/dss/dss.c    |  9 +--
 drivers/video/fbdev/omap2/omapfb/dss/sdi.c    |  3 +-
 include/video/omapfb_dss.h                    |  8 ---
 5 files changed, 9 insertions(+), 80 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dpi.c b/drivers/video/fbdev/omap2/omapfb/dss/dpi.c
index 7c1b7d89389a..395b1139a5ae 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dpi.c
@@ -20,6 +20,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/clk.h>
 #include <linux/component.h>
 
@@ -845,7 +846,7 @@ int dpi_init_port(struct platform_device *pdev, struct device_node *port)
 	if (!dpi)
 		return -ENOMEM;
 
-	ep = omapdss_of_get_next_endpoint(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c b/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c
index 4040e247e026..efb7d2e4ce85 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss-of.c
@@ -15,72 +15,6 @@
 
 #include "dss.h"
 
-struct device_node *
-omapdss_of_get_next_port(const struct device_node *parent,
-			 struct device_node *prev)
-{
-	struct device_node *port = NULL;
-
-	if (!parent)
-		return NULL;
-
-	if (!prev) {
-		struct device_node *ports;
-		/*
-		 * It's the first call, we have to find a port subnode
-		 * within this node or within an optional 'ports' node.
-		 */
-		ports = of_get_child_by_name(parent, "ports");
-		if (ports)
-			parent = ports;
-
-		port = of_get_child_by_name(parent, "port");
-
-		/* release the 'ports' node */
-		of_node_put(ports);
-	} else {
-		struct device_node *ports;
-
-		ports = of_get_parent(prev);
-		if (!ports)
-			return NULL;
-
-		do {
-			port = of_get_next_child(ports, prev);
-			if (!port) {
-				of_node_put(ports);
-				return NULL;
-			}
-			prev = port;
-		} while (!of_node_name_eq(port, "port"));
-
-		of_node_put(ports);
-	}
-
-	return port;
-}
-EXPORT_SYMBOL_GPL(omapdss_of_get_next_port);
-
-struct device_node *
-omapdss_of_get_next_endpoint(const struct device_node *parent,
-			     struct device_node *prev)
-{
-	struct device_node *ep = NULL;
-
-	if (!parent)
-		return NULL;
-
-	do {
-		ep = of_get_next_child(parent, prev);
-		if (!ep)
-			return NULL;
-		prev = ep;
-	} while (!of_node_name_eq(ep, "endpoint"));
-
-	return ep;
-}
-EXPORT_SYMBOL_GPL(omapdss_of_get_next_endpoint);
-
 struct device_node *dss_of_port_get_parent_device(struct device_node *port)
 {
 	struct device_node *np;
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
index d814e4baa4b3..5cab317011ee 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
@@ -26,6 +26,7 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/regulator/consumer.h>
 #include <linux/suspend.h>
 #include <linux/component.h>
@@ -922,7 +923,7 @@ static int dss_init_ports(struct platform_device *pdev)
 	if (parent == NULL)
 		return 0;
 
-	port = omapdss_of_get_next_port(parent, NULL);
+	port = of_graph_get_next_port(parent, NULL);
 	if (!port)
 		return 0;
 
@@ -953,7 +954,7 @@ static int dss_init_ports(struct platform_device *pdev)
 			break;
 		}
 	} while (!ret &&
-		 (port = omapdss_of_get_next_port(parent, port)) != NULL);
+		 (port = of_graph_get_next_port(parent, port)) != NULL);
 
 	if (ret)
 		dss_uninit_ports(pdev);
@@ -969,7 +970,7 @@ static void dss_uninit_ports(struct platform_device *pdev)
 	if (parent == NULL)
 		return;
 
-	port = omapdss_of_get_next_port(parent, NULL);
+	port = of_graph_get_next_port(parent, NULL);
 	if (!port)
 		return;
 
@@ -1000,7 +1001,7 @@ static void dss_uninit_ports(struct platform_device *pdev)
 		default:
 			break;
 		}
-	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+	} while ((port = of_graph_get_next_port(parent, port)) != NULL);
 }
 
 static int dss_video_pll_probe(struct platform_device *pdev)
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/sdi.c b/drivers/video/fbdev/omap2/omapfb/dss/sdi.c
index d527931b2b16..22a6243d7abf 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/sdi.c
@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/string.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/component.h>
 
 #include <video/omapfb_dss.h>
@@ -405,7 +406,7 @@ int sdi_init_port(struct platform_device *pdev, struct device_node *port)
 	u32 datapairs;
 	int r;
 
-	ep = omapdss_of_get_next_endpoint(port, NULL);
+	ep = of_graph_get_next_port_endpoint(port, NULL);
 	if (!ep)
 		return 0;
 
diff --git a/include/video/omapfb_dss.h b/include/video/omapfb_dss.h
index a8c0c3eeeb5b..d133190e3143 100644
--- a/include/video/omapfb_dss.h
+++ b/include/video/omapfb_dss.h
@@ -811,14 +811,6 @@ static inline bool omapdss_device_is_enabled(struct omap_dss_device *dssdev)
 	return dssdev->state == OMAP_DSS_DISPLAY_ACTIVE;
 }
 
-struct device_node *
-omapdss_of_get_next_port(const struct device_node *parent,
-			 struct device_node *prev);
-
-struct device_node *
-omapdss_of_get_next_endpoint(const struct device_node *parent,
-			     struct device_node *prev);
-
 struct omap_dss_device *
 omapdss_of_find_source_for_first_ep(struct device_node *node);
 #else
-- 
2.43.0

[PATCH v2 9/9] media: xilinx-tpg: use new of_graph functions

Message details and related content
Now we can use new port related functions for port parsing. Use it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
---
 drivers/media/platform/xilinx/xilinx-tpg.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/xilinx/xilinx-tpg.c b/drivers/media/platform/xilinx/xilinx-tpg.c
index e05e528ffc6f..a25f216b2513 100644
--- a/drivers/media/platform/xilinx/xilinx-tpg.c
+++ b/drivers/media/platform/xilinx/xilinx-tpg.c
@@ -13,6 +13,7 @@
 #include <linux/gpio/consumer.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_graph.h>
 #include <linux/platform_device.h>
 #include <linux/xilinx-v4l2-controls.h>
 
@@ -744,7 +745,7 @@ static int xtpg_parse_of(struct xtpg_device *xtpg)
 		}
 
 		if (nports == 0) {
-			endpoint = of_get_next_child(port, NULL);
+			endpoint = of_graph_get_next_port_endpoint(port, NULL);
 			if (endpoint)
 				has_endpoint = true;
 			of_node_put(endpoint);
-- 
2.43.0

Re: [PATCH v2 1/9] of: property: add of_graph_get_next_port()

Message details and related content
Hi Morimoto-san,

(CC'ing Sakari)

Thank you for the patch.

On Fri, Aug 09, 2024 at 04:22:22AM +0000, Kuninori Morimoto wrote:
We have endpoint base functions
	- of_graph_get_next_device_endpoint()
	- of_graph_get_device_endpoint_count()
	- for_each_of_graph_device_endpoint()

Here, for_each_of_graph_device_endpoint() loop finds each endpoints

	ports {
		port@0 {
(1)			endpoint {...};
		};
		port@1 {
(2)			endpoint {...};
		};
		...
	};

In above case, it finds endpoint as (1) -> (2) -> ...

Basically, user/driver knows which port is used for what, but not in
all cases. For example on flexible/generic driver case, how many ports
are used is not fixed.

For example Sound Generic Card driver which is used from many venders
can't know how many ports are used. Because the driver is very
flexible/generic, it is impossible to know how many ports are used,
it depends on each vender SoC and/or its used board.

And more, the port can have multi endpoints. For example Generic Sound
Card case, it supports many type of connection between CPU / Codec, and
some of them uses multi endpoint in one port.
Then, Generic Sound Card want to handle each connection via "port"
instead of "endpoint".
But, it is very difficult to handle each "port" via
for_each_of_graph_device_endpoint(). Getting "port" by using
of_get_parent() from "endpoint" doesn't work. see below.

	ports {
		port@0 {
(1)			endpoint@0 {...};

89 more quoted lines

Having multiple "ports" nodes in a device node is not something I've
ever seen before. There may be use cases, but how widespread are they ?
I would prefer handling this in driver code instead of creating a helper
function if the use case is rare.
quoted hunk
+
+/**
+ * of_graph_get_next_port() - get next port node.
+ * @parent: pointer to the parent device node, or parent ports node
+ * @prev: previous port node, or NULL to get first
+ *
+ * Parent device node can be used as @parent whether device node has ports node or not.
+ * It will work same as ports@0 node.
+ *
+ * Return: A 'port' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports __free(device_node) =
+			of_graph_get_next_ports(parent, NULL);
This also makes me quite uncomfortable. Iterating over all ports of a
device node that contains multiple "ports" children seems an ill-defined
use case.
quoted hunk
+
+		return of_get_child_by_name(ports, "port");
+	}
+
+	do {
+		prev = of_get_next_child(parent, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "port"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port);
+
 /**
  * of_graph_get_next_endpoint() - get next endpoint node
  * @parent: pointer to the parent device node
@@ -823,6 +893,24 @@ unsigned int of_graph_get_endpoint_count(const struct device_node *np)
 }
 EXPORT_SYMBOL(of_graph_get_endpoint_count);
 
+/**
+ * of_graph_get_port_count() - get the number of port in a device node
+ * @np: pointer to the parent device node
+ *
+ * Return: count of port of this device node
+ */
+unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	struct device_node *port = NULL;
+	int num = 0;
As the counter can never be negative, you can make this an unsigned int.
quoted hunk
+
+	for_each_of_graph_port(np, port)
+		num++;
+
+	return num;
+}
+EXPORT_SYMBOL(of_graph_get_port_count);
+
 /**
  * of_graph_get_remote_node() - get remote parent device_node for given port/endpoint
  * @node: pointer to parent device_node containing graph port/endpoint
diff --git a/include/linux/of_graph.h b/include/linux/of_graph.h
index a4bea62bfa29..a6b91577700a 100644
--- a/include/linux/of_graph.h
+++ b/include/linux/of_graph.h
@@ -37,14 +37,41 @@ struct of_endpoint {
 	for (child = of_graph_get_next_endpoint(parent, NULL); child != NULL; \
 	     child = of_graph_get_next_endpoint(parent, child))
 
+/**
+ * for_each_of_graph_ports - iterate over every ports in a device node
+ * @parent: parent device node containing ports
+ * @child: loop variable pointing to the current ports node
+ *
+ * When breaking out of the loop, of_node_put(child) has to be called manually.
+ */
+#define for_each_of_graph_ports(parent, child)				\
+	for (child = of_graph_get_next_ports(parent, NULL); child != NULL; \
+	     child = of_graph_get_next_ports(parent, child))
+
+/**
+ * for_each_of_graph_port - iterate over every port in a device or ports node
+ * @parent: parent device or ports node containing port
+ * @child: loop variable pointing to the current port node
+ *
+ * When breaking out of the loop, of_node_put(child) has to be called manually.
+ */
+#define for_each_of_graph_port(parent, child)			\
+	for (child = of_graph_get_next_port(parent, NULL); child != NULL; \
+	     child = of_graph_get_next_port(parent, child))
I think I've proposed something similar a looooong time ago, and was
told that iterating over ports is not something that drivers should do.
The situation may have changed since though.

Sakari, any opinion on this ?
quoted hunk
+
 #ifdef CONFIG_OF
 bool of_graph_is_present(const struct device_node *node);
 int of_graph_parse_endpoint(const struct device_node *node,
 				struct of_endpoint *endpoint);
 unsigned int of_graph_get_endpoint_count(const struct device_node *np);
+unsigned int of_graph_get_port_count(struct device_node *np);
 struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
 struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 					struct device_node *previous);
+struct device_node *of_graph_get_next_ports(struct device_node *parent,
+					    struct device_node *ports);
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *port);
 struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_endpoint(
@@ -73,6 +100,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node
 	return 0;
 }
 
+static inline unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	return 0;
+}
+
 static inline struct device_node *of_graph_get_port_by_id(
 					struct device_node *node, u32 id)
 {
@@ -86,6 +118,20 @@ static inline struct device_node *of_graph_get_next_endpoint(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_next_ports(
+					struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}
+

10 more quoted lines

-- 
Regards,

Laurent Pinchart

Re: [PATCH v2 1/9] of: property: add of_graph_get_next_port()

Message details and related content
Hi Laurent

Thank you for the review
Having multiple "ports" nodes in a device node is not something I've
ever seen before. There may be use cases, but how widespread are they ?
I would prefer handling this in driver code instead of creating a helper
function if the use case is rare.
In Sound, basically 1 CPU device will be 1 Sound Card, but sometimes we
want to handle 1 CPU device for 2 Sound Cards.
In such case, it needs multiple "ports".

1 example is
	(A) arch/arm64/boot/dts/renesas/ulcb-audio-graph-card.dtsi
	(B) arch/arm64/boot/dts/renesas/ulcb-kf-audio-graph-card.dtsi

We have ULCB board and its expand board (= KingFisher), and both have
Sound interface. In this case, we want to handle ULCB-Sound as 1st Sound
Card, and ULCB-KF-Sound as 2nd Sound Card. Before, it was handled as
1 big Sound Card, but it was not intuitive for user.

Our SoC's ports@0 is used for ULCB-Sound (= A), and ports@1 is used for
ULCB-KF-Sound (= B) now.

quoted
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports __free(device_node) =
+			of_graph_get_next_ports(parent, NULL);
This also makes me quite uncomfortable. Iterating over all ports of a
device node that contains multiple "ports" children seems an ill-defined
use case.
This is because having "ports" node is optional. The driver code will be
pointlessly complicated without above.

Below 2 cases are indicating same things. So driver want to handle these
by same code.

	/* CASE1 */
	device {
		ports {
			port { ... };
		};
	};

	/* CASE2 */
	device {
		port { ... };
	};

	port = of_graph_get_next_port(device, NULL);

quoted
+#define for_each_of_graph_port(parent, child)			\
+	for (child = of_graph_get_next_port(parent, NULL); child != NULL; \
+	     child = of_graph_get_next_port(parent, child))
I think I've proposed something similar a looooong time ago, and was
told that iterating over ports is not something that drivers should do.
The situation may have changed since though.
I guess you mean checking "endpoint" is enough ?
But unfortunately, it is not for us.

I guess this is mentioned in git-log, but we have *Generic* Sound Card
driver which supports many type of Sound connection.

	device {
		ports {
			port@0 {
				endpoint@0 { ... };
				endpoint@1 { ... };
			};
			port@1 {
				endpoint { ... };
			};
		};
	};

Because it is *Generic* Sound Card driver, it need to know how many
"port" are used. In this case, using "endpoint" loop is not useful.
It want to use "port" base loop.


Thank you for your help !!

Best regards
---
Kuninori Morimoto

Re: [PATCH v2 1/9] of: property: add of_graph_get_next_port()

Message details and related content
Hi Laurent, Morimoto-san,

On Sun, Aug 11, 2024 at 08:03:16PM +0300, Laurent Pinchart wrote:
Hi Morimoto-san,

(CC'ing Sakari)

Thank you for the patch.

On Fri, Aug 09, 2024 at 04:22:22AM +0000, Kuninori Morimoto wrote:
quoted
We have endpoint base functions
	- of_graph_get_next_device_endpoint()
	- of_graph_get_device_endpoint_count()
	- for_each_of_graph_device_endpoint()

Here, for_each_of_graph_device_endpoint() loop finds each endpoints

	ports {
		port@0 {
(1)			endpoint {...};
		};
		port@1 {
(2)			endpoint {...};
		};
		...
	};

In above case, it finds endpoint as (1) -> (2) -> ...

Basically, user/driver knows which port is used for what, but not in
all cases. For example on flexible/generic driver case, how many ports
are used is not fixed.

For example Sound Generic Card driver which is used from many venders
can't know how many ports are used. Because the driver is very
flexible/generic, it is impossible to know how many ports are used,
it depends on each vender SoC and/or its used board.

And more, the port can have multi endpoints. For example Generic Sound
Card case, it supports many type of connection between CPU / Codec, and
some of them uses multi endpoint in one port.
Then, Generic Sound Card want to handle each connection via "port"
instead of "endpoint".

101 more quoted lines

I wonder if this is allowed by the graph schema. Probably not.
quoted
+
+/**
+ * of_graph_get_next_port() - get next port node.
+ * @parent: pointer to the parent device node, or parent ports node
+ * @prev: previous port node, or NULL to get first
+ *
+ * Parent device node can be used as @parent whether device node has ports node or not.
+ * It will work same as ports@0 node.
+ *
+ * Return: A 'port' node pointer with refcount incremented. Refcount
+ * of the passed @prev node is decremented.
+ */
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *prev)
+{
+	if (!parent)
+		return NULL;
+
+	if (!prev) {
+		struct device_node *ports __free(device_node) =
+			of_graph_get_next_ports(parent, NULL);
This also makes me quite uncomfortable. Iterating over all ports of a
device node that contains multiple "ports" children seems an ill-defined
use case.
quoted
+
+		return of_get_child_by_name(ports, "port");
+	}
+
+	do {
+		prev = of_get_next_child(parent, prev);
+		if (!prev)
+			break;
+	} while (!of_node_name_eq(prev, "port"));
+
+	return prev;
+}
+EXPORT_SYMBOL(of_graph_get_next_port);

67 more quoted lines

It'd be good to understand first what would be the use case for it. There
is already a function to obtain endpoints within a given port, including an
fwnode equivalent.
quoted
+
 #ifdef CONFIG_OF
 bool of_graph_is_present(const struct device_node *node);
 int of_graph_parse_endpoint(const struct device_node *node,
 				struct of_endpoint *endpoint);
 unsigned int of_graph_get_endpoint_count(const struct device_node *np);
+unsigned int of_graph_get_port_count(struct device_node *np);
 struct device_node *of_graph_get_port_by_id(struct device_node *node, u32 id);
 struct device_node *of_graph_get_next_endpoint(const struct device_node *parent,
 					struct device_node *previous);
+struct device_node *of_graph_get_next_ports(struct device_node *parent,
+					    struct device_node *ports);
+struct device_node *of_graph_get_next_port(struct device_node *parent,
+					   struct device_node *port);
 struct device_node *of_graph_get_endpoint_by_regs(
 		const struct device_node *parent, int port_reg, int reg);
 struct device_node *of_graph_get_remote_endpoint(
@@ -73,6 +100,11 @@ static inline unsigned int of_graph_get_endpoint_count(const struct device_node
 	return 0;
 }
 
+static inline unsigned int of_graph_get_port_count(struct device_node *np)
+{
+	return 0;
+}
+
 static inline struct device_node *of_graph_get_port_by_id(
 					struct device_node *node, u32 id)
 {
@@ -86,6 +118,20 @@ static inline struct device_node *of_graph_get_next_endpoint(
 	return NULL;
 }
 
+static inline struct device_node *of_graph_get_next_ports(
+					struct device_node *parent,
+					struct device_node *previous)
+{
+	return NULL;
+}

12 more quoted lines

-- 
Kind regards,

Sakari Ailus
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help