[PATCH v2 04/17] backlight: corgi-lcd: Use backlight power constants
flat view
STALE827d
LANDED
From: Thomas Zimmermann <tzimmermann@suse.de>
Date: 2024-06-24 15:21:01
Also in:
dri-devel, linux-pwm
Subsystem:
backlight class/subsystem, framebuffer layer, the rest · Maintainers:
Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller, Linus Torvalds
Revision v2 of 2 in this series; landed in mainline as e263c0519101 on 2024-07-04.
Revisions (2)
- v1 [diff vs current]
- v2 current
Replace FB_BLANK_ constants with their counterparts from the backlight subsystem. The values are identical, so there's no change in functionality. Only change the driver's backlight device, but leave the LCD device as-is. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> --- drivers/video/backlight/corgi_lcd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/corgi_lcd.c b/drivers/video/backlight/corgi_lcd.c
index aad1680c9075..e4fcfbe38dc6 100644
--- a/drivers/video/backlight/corgi_lcd.c
+++ b/drivers/video/backlight/corgi_lcd.c@@ -526,7 +526,7 @@ static int corgi_lcd_probe(struct spi_device *spi) return PTR_ERR(lcd->bl_dev); lcd->bl_dev->props.brightness = pdata->default_intensity; - lcd->bl_dev->props.power = FB_BLANK_UNBLANK; + lcd->bl_dev->props.power = BACKLIGHT_POWER_ON; ret = setup_gpio_backlight(lcd, pdata); if (ret)
@@ -547,7 +547,7 @@ static void corgi_lcd_remove(struct spi_device *spi) { struct corgi_lcd *lcd = spi_get_drvdata(spi); - lcd->bl_dev->props.power = FB_BLANK_UNBLANK; + lcd->bl_dev->props.power = BACKLIGHT_POWER_ON; lcd->bl_dev->props.brightness = 0; backlight_update_status(lcd->bl_dev); corgi_lcd_set_power(lcd->lcd_dev, FB_BLANK_POWERDOWN);
--
2.45.2