Re: [PATCH v2 05/10] dt-bindings: iio: adc: adi,ad7606: add supply properties
From: Jonathan Cameron <jic23@kernel.org>
Date: 2024-06-29 15:30:52
Also in:
linux-devicetree, linux-iio, lkml
On Fri, 28 Jun 2024 14:48:23 +0000 Guillaume Stols [off-list ref] wrote:
Add voltage supplies Signed-off-by: Guillaume Stols <redacted>
Trivial comment inline. No need to reroll for that though.
quoted hunk ↗ jump to hunk
--- Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 509970922cda..a1c38a5812f7 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml@@ -35,6 +35,15 @@ properties: avcc-supply: true + vdrive-supply: + description: + Determines the voltage level at which the interface logic pins will + operate. + + refin-supply: + description: + The voltage supply for optional external reference voltage. + interrupts: description: The BUSY pin falling edge indicates that the conversion is over, and thus@@ -106,9 +115,11 @@ required: - reg - spi-cpha - avcc-supply + - vdrive-supply - interrupts - adi,conversion-start-gpios +
Unrelated white space change. Remember to check patches for these. If whitespace changes are needed have an additional patch that just does that.
quoted hunk ↗ jump to hunk
allOf: - $ref: /schemas/spi/spi-peripheral-props.yaml#@@ -130,6 +141,7 @@ examples: spi-cpha; avcc-supply = <&adc_vref>; + vdrive-supply = <&vdd_supply>; interrupts = <25 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio>;