Hi Lee,

...

Subject: Re: EXTERNAL: Re: (subset) [PATCH v1 1/1] backlight: mp3309c:
fix leds flickering in pwm mode

On Fri, 03 May 2024, FLAVIO SULIGOI wrote:

quoted

Hi Lee,

...

quoted

Subject: EXTERNAL: Re: (subset) [PATCH v1 1/1] backlight: mp3309c:
fix leds flickering in pwm mode

[Use caution with links & attachments]



On Thu, 02 May 2024, Lee Jones wrote:

quoted

On Wed, 17 Apr 2024 17:31:05 +0200, Flavio Suligoi wrote:

quoted

The mp3309 has two configuration registers, named according to
their address (0x00 and 0x01).
In the second register (0x01), the bit DIMS (Dimming Mode
Select) must be always 0 (zero), in both analog (via i2c
commands) and pwm dimming mode.

In the initial driver version, the DIMS bit was set in pwm mode
and reset in analog mode.
But if the DIMS bit is set in pwm dimming mode and other devices
are connected on the same i2c bus, every i2c commands on the bus
generates a flickering on the LEDs powered by the mp3309c.

[...]

Applied, thanks!

[1/1] backlight: mp3309c: fix leds flickering in pwm mode
      commit: ce60cddc2abf61902dfca71d630624db95315124

Applied, but in future it's; I2C, PWM and LED, thanks.

Sorry for my question, but do you mean that I also have to add the
I2C, PWM and LED mailing lists in my messages related to the mp33309c

patches?

Just use proper capitalisation when you abbreviate the names these
subsystems please.

Ah, ok, I got it!

--
Lee Jones [李琼斯]

Thanks for your explanation,
Flavio