Thread (73 messages) 73 messages, 10 authors, 2024-02-27

Re: [DO NOT MERGE v6 08/37] clocksource: sh_tmu: CLOCKSOURCE support.

flat view

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2024-02-26 16:55:01
Also in: dri-devel, linux-clk, linux-devicetree, linux-ide, linux-pci, linux-renesas-soc, linux-serial, linux-sh, lkml

Hi Saton-san,

Thanks for your patch!

Please drop the period at the end of the one-line summary.

On Tue, Jan 9, 2024 at 9:23 AM Yoshinori Sato
[off-list ref] wrote:
Allows initialization as CLOCKSOURCE.
Please explain why this is needed. E.g.

    Add support for early registration using TIMER_OF_DECLARE(),
    so the timer can be used as a clocksource on SoCs that do not
    have any other suitable timer.
Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
quoted hunk ↗ jump to hunk
--- a/drivers/clocksource/sh_tmu.c
+++ b/drivers/clocksource/sh_tmu.c
quoted hunk ↗ jump to hunk
@@ -148,8 +151,8 @@ static int __sh_tmu_enable(struct sh_tmu_channel *ch)
        /* enable clock */
        ret = clk_enable(ch->tmu->clk);
        if (ret) {
-               dev_err(&ch->tmu->pdev->dev, "ch%u: cannot enable clock\n",
-                       ch->index);
+               pr_err("%s ch%u: cannot enable clock\n",
+                      ch->tmu->name, ch->index);
Please wrap the line after, not before, "ch->tmu->name,".
                return ret;
        }
quoted hunk ↗ jump to hunk
@@ -324,14 +332,14 @@ static int sh_tmu_register_clocksource(struct sh_tmu_channel *ch,
        cs->mask = CLOCKSOURCE_MASK(32);
        cs->flags = CLOCK_SOURCE_IS_CONTINUOUS;

-       dev_info(&ch->tmu->pdev->dev, "ch%u: used as clock source\n",
-                ch->index);
+       pr_info("%s ch%u: used as clock source\n",
+               ch->tmu->name, ch->index);
No need to wrap this line at all.
quoted hunk ↗ jump to hunk

        clocksource_register_hz(cs, ch->tmu->rate);
        return 0;
 }

-static struct sh_tmu_channel *ced_to_sh_tmu(struct clock_event_device *ced)
+static inline struct sh_tmu_channel *ced_to_sh_tmu(struct clock_event_device *ced)
 {
        return container_of(ced, struct sh_tmu_channel, ced);
 }
@@ -364,8 +372,8 @@ static int sh_tmu_clock_event_set_state(struct clock_event_device *ced,
        if (clockevent_state_oneshot(ced) || clockevent_state_periodic(ced))
                sh_tmu_disable(ch);

-       dev_info(&ch->tmu->pdev->dev, "ch%u: used for %s clock events\n",
-                ch->index, periodic ? "periodic" : "oneshot");
+       pr_info("%s ch%u: used for %s clock events\n",
+               ch->tmu->name, ch->index, periodic ? "periodic" : "oneshot");
Please wrap the line after, not before, "ch->tmu->name,".
quoted hunk ↗ jump to hunk
        sh_tmu_clock_event_start(ch, periodic);
        return 0;
 }
@@ -403,7 +411,8 @@ static void sh_tmu_clock_event_resume(struct clock_event_device *ced)
 }

 static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
-                                      const char *name)
+                                      const char *name,
+                                      struct device_node *np)
"np" is unused in this function, hence this change is unneeded.
(Hey, I already said that in my review of v3)
quoted hunk ↗ jump to hunk
 {
        struct clock_event_device *ced = &ch->ced;
        int ret;
@@ -417,30 +426,32 @@ static void sh_tmu_register_clockevent(struct sh_tmu_channel *ch,
        ced->set_state_shutdown = sh_tmu_clock_event_shutdown;
        ced->set_state_periodic = sh_tmu_clock_event_set_periodic;
        ced->set_state_oneshot = sh_tmu_clock_event_set_oneshot;
-       ced->suspend = sh_tmu_clock_event_suspend;
-       ced->resume = sh_tmu_clock_event_resume;
-
-       dev_info(&ch->tmu->pdev->dev, "ch%u: used for clock events\n",
-                ch->index);
+       if (ch->tmu->pdev) {
+               ced->suspend = sh_tmu_clock_event_suspend;
+               ced->resume = sh_tmu_clock_event_resume;
+       }
+       pr_info("%s ch%u: used for clock events\n",
+               ch->tmu->name, ch->index);
No need to wrap this line at all.
quoted hunk ↗ jump to hunk

        clockevents_config_and_register(ced, ch->tmu->rate, 0x300, 0xffffffff);

        ret = request_irq(ch->irq, sh_tmu_interrupt,
                          IRQF_TIMER | IRQF_IRQPOLL | IRQF_NOBALANCING,
-                         dev_name(&ch->tmu->pdev->dev), ch);
+                         ch->tmu->name, ch);
        if (ret) {
-               dev_err(&ch->tmu->pdev->dev, "ch%u: failed to request irq %d\n",
-                       ch->index, ch->irq);
+               pr_err("%s ch%u: failed to request irq %d\n",
+                      ch->tmu->name, ch->index, ch->irq);
Please wrap the line after, not before, "ch->tmu->name,".
quoted hunk ↗ jump to hunk
                return;
        }
 }

 static int sh_tmu_register(struct sh_tmu_channel *ch, const char *name,
+                          struct device_node *np,
np is unneeded.
quoted hunk ↗ jump to hunk
                           bool clockevent, bool clocksource)
 {
        if (clockevent) {
                ch->tmu->has_clockevent = true;
-               sh_tmu_register_clockevent(ch, name);
+               sh_tmu_register_clockevent(ch, name, np);
        } else if (clocksource) {
                ch->tmu->has_clocksource = true;
                sh_tmu_register_clocksource(ch, name);
quoted hunk ↗ jump to hunk
@@ -465,53 +477,59 @@ static int sh_tmu_channel_setup(struct sh_tmu_channel *ch, unsigned int index,
        else
                ch->base = tmu->mapbase + 8 + ch->index * 12;

-       ch->irq = platform_get_irq(tmu->pdev, index);
+       if (tmu->pdev)
+               ch->irq = platform_get_irq(tmu->pdev, index);
+       else
+               ch->irq = of_irq_get(np, index);
You can use of_irq_get() unconditionally.
quoted hunk ↗ jump to hunk
        if (ch->irq < 0)
                return ch->irq;

        ch->cs_enabled = false;
        ch->enable_count = 0;

-       return sh_tmu_register(ch, dev_name(&tmu->pdev->dev),
+       return sh_tmu_register(ch, tmu->name, np,
No need to pass np.
quoted hunk ↗ jump to hunk
                               clockevent, clocksource);
 }

-static int sh_tmu_map_memory(struct sh_tmu_device *tmu)
+static int sh_tmu_map_memory(struct sh_tmu_device *tmu, struct device_node *np)
 {
        struct resource *res;

-       res = platform_get_resource(tmu->pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&tmu->pdev->dev, "failed to get I/O memory\n");
-               return -ENXIO;
-       }
+       if (tmu->pdev) {
+               res = platform_get_resource(tmu->pdev, IORESOURCE_MEM, 0);
+               if (!res) {
+                       pr_err("sh_tmu failed to get I/O memory\n");
+                       return -ENXIO;
+               }
+
+               tmu->mapbase = ioremap(res->start, resource_size(res));
+       } else
+               tmu->mapbase = of_iomap(np, 0);
You can use of_iomap() unconditionally.
quoted hunk ↗ jump to hunk

-       tmu->mapbase = ioremap(res->start, resource_size(res));
        if (tmu->mapbase == NULL)
                return -ENXIO;

        return 0;
 }

-static int sh_tmu_parse_dt(struct sh_tmu_device *tmu)
+static int sh_tmu_parse_dt(struct sh_tmu_device *tmu, struct device_node *np)
 {
-       struct device_node *np = tmu->pdev->dev.of_node;
-
        tmu->model = SH_TMU;
        tmu->num_channels = 3;

        of_property_read_u32(np, "#renesas,channels", &tmu->num_channels);

        if (tmu->num_channels != 2 && tmu->num_channels != 3) {
-               dev_err(&tmu->pdev->dev, "invalid number of channels %u\n",
-                       tmu->num_channels);
+               pr_err("%s: invalid number of channels %u\n",
+                      tmu->name, tmu->num_channels);
Please wrap the line after, not before, "ch->tmu->name,".
quoted hunk ↗ jump to hunk
                return -EINVAL;
        }

        return 0;
 }

-static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
+static int sh_tmu_setup(struct sh_tmu_device *tmu,
+                       struct platform_device *pdev, struct device_node *np)
 {
        unsigned int i;
        int ret;
quoted hunk ↗ jump to hunk
@@ -531,14 +554,17 @@ static int sh_tmu_setup(struct sh_tmu_device *tmu, struct platform_device *pdev)
                tmu->model = id->driver_data;
                tmu->num_channels = hweight8(cfg->channels_mask);
        } else {
-               dev_err(&tmu->pdev->dev, "missing platform data\n");
+               pr_err("%s missing platform data\n", tmu->name);
                return -ENXIO;
        }

        /* Get hold of clock. */
-       tmu->clk = clk_get(&tmu->pdev->dev, "fck");
+       if (pdev)
+               tmu->clk = clk_get(&tmu->pdev->dev, "fck");
+       else
+               tmu->clk = of_clk_get(np, 0);
You can use of_clk_get() unconditionally.
quoted hunk ↗ jump to hunk
        if (IS_ERR(tmu->clk)) {
-               dev_err(&tmu->pdev->dev, "cannot get clock\n");
+               pr_err("%s: cannot get clock\n", tmu->name);
                return PTR_ERR(tmu->clk);
        }
quoted hunk ↗ jump to hunk
@@ -665,12 +711,17 @@ static void __exit sh_tmu_exit(void)
        platform_driver_unregister(&sh_tmu_device_driver);
 }

+subsys_initcall(sh_tmu_init);
+module_exit(sh_tmu_exit);
+#endif
+
 #ifdef CONFIG_SUPERH
+#ifdef CONFIG_SH_DEVICE_TREE
+TIMER_OF_DECLARE(sh_tmu, "renesas,tmu", sh_tmu_of_register);
Probably this TIMER_OF_DECLARE() should be done unconditionally,
like is done in drivers/clocksource/renesas-ostm.c.

I gave that a try on R-Mobile A1, which also has TMU, but it didn't
seem to work (timer not firing?). So I suspect there are some missing
clk_enable() calls.  In the case of the platform driver, these are
handled using pm_runtime_get_sync().
quoted hunk ↗ jump to hunk
+#else
 sh_early_platform_init("earlytimer", &sh_tmu_device_driver);
 #endif
-
-subsys_initcall(sh_tmu_init);
-module_exit(sh_tmu_exit);
+#endif

 MODULE_AUTHOR("Magnus Damm");
 MODULE_DESCRIPTION("SuperH TMU Timer Driver");
Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help