@@ -123,7 +123,7 @@ static u_long get_line_length(int xres_virtual, int bpp)
      *  First part, xxxfb_check_var, must not write anything
      *  to hardware, it should only verify and adjust var.
      *  This means it doesn't alter par but it does use hardware
-     *  data from it to check this var. 
+     *  data from it to check this var.
      */
 
 static int mc68x328fb_check_var(struct fb_var_screeninfo *var,

@@ -181,7 +181,7 @@ static int mc68x328fb_check_var(struct fb_var_screeninfo *var,
 
 	/*
 	 * Now that we checked it we alter var. The reason being is that the video
-	 * mode passed in might not work but slight changes to it might make it 
+	 * mode passed in might not work but slight changes to it might make it
 	 * work. This way we let the user know what is acceptable.
 	 */
 	switch (var->bits_per_pixel) {

@@ -256,8 +256,8 @@ static int mc68x328fb_check_var(struct fb_var_screeninfo *var,
 }
 
 /* This routine actually sets the video mode. It's in here where we
- * the hardware state info->par and fix which can be affected by the 
- * change in par. For this driver it doesn't do much. 
+ * the hardware state info->par and fix which can be affected by the
+ * change in par. For this driver it doesn't do much.
  */
 static int mc68x328fb_set_par(struct fb_info *info)
 {

@@ -294,7 +294,7 @@ static int mc68x328fb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
 	 *   {hardwarespecific} contains width of RAMDAC
 	 *   cmap[X] is programmed to (X << red.offset) | (X << green.offset) | (X << blue.offset)
 	 *   RAMDAC[X] is programmed to (red, green, blue)
-	 * 
+	 *
 	 * Pseudocolor:
 	 *    uses offset = 0 && length = RAMDAC register width.
 	 *    var->{color}.offset is 0

@@ -383,7 +383,7 @@ static int mc68x328fb_pan_display(struct fb_var_screeninfo *var,
 }
 
     /*
-     *  Most drivers don't need their own mmap function 
+     *  Most drivers don't need their own mmap function
      */
 
 static int mc68x328fb_mmap(struct fb_info *info, struct vm_area_struct *vma)