On Tue, Jul 05, 2022 at 12:08:52PM +0200, Jean Delvare wrote:

On Tue, 28 Jun 2022 16:03:12 +0200, Uwe Kleine-König wrote:

quoted

From: Uwe Kleine-König <redacted>

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Signed-off-by: Uwe Kleine-König <redacted>
---

That's a huge change for a relatively small benefit, but if this is
approved by the I2C core maintainer then fine with me. For:

Agreed, it's huge. The benefit isn't really measureable, the motivation
is to improve the situation for driver authors who with the change
cannot make wrong assumptions about what to return in .remove(). During
the preparation this uncovered a few bugs. See for example
bbc126ae381cf0a27822c1f822d0aeed74cc40d9.

quoted

 drivers/hwmon/adc128d818.c                                | 4 +---
 drivers/hwmon/adt7470.c                                   | 3 +--
 drivers/hwmon/asb100.c                                    | 6 ++----
 drivers/hwmon/asc7621.c                                   | 4 +---
 drivers/hwmon/dme1737.c                                   | 4 +---
 drivers/hwmon/f75375s.c                                   | 5 ++---
 drivers/hwmon/fschmd.c                                    | 6 ++----
 drivers/hwmon/ftsteutates.c                               | 3 +--
 drivers/hwmon/ina209.c                                    | 4 +---
 drivers/hwmon/ina3221.c                                   | 4 +---
 drivers/hwmon/jc42.c                                      | 3 +--
 drivers/hwmon/mcp3021.c                                   | 4 +---
 drivers/hwmon/occ/p8_i2c.c                                | 4 +---
 drivers/hwmon/pcf8591.c                                   | 3 +--
 drivers/hwmon/smm665.c                                    | 3 +--
 drivers/hwmon/tps23861.c                                  | 4 +---
 drivers/hwmon/w83781d.c                                   | 4 +---
 drivers/hwmon/w83791d.c                                   | 6 ++----
 drivers/hwmon/w83792d.c                                   | 6 ++----
 drivers/hwmon/w83793.c                                    | 6 ++----
 drivers/hwmon/w83795.c                                    | 4 +---
 drivers/hwmon/w83l785ts.c                                 | 6 ++----
 drivers/i2c/i2c-core-base.c                               | 6 +-----
 drivers/i2c/i2c-slave-eeprom.c                            | 4 +---
 drivers/i2c/i2c-slave-testunit.c                          | 3 +--
 drivers/i2c/i2c-smbus.c                                   | 3 +--
 drivers/i2c/muxes/i2c-mux-ltc4306.c                       | 4 +---
 drivers/i2c/muxes/i2c-mux-pca9541.c                       | 3 +--
 drivers/i2c/muxes/i2c-mux-pca954x.c                       | 3 +--

Reviewed-by: Jean Delvare <redacted>

Thanks
Uwe

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |