On Mon, Jul 25, 2022 at 4:00 PM Andy Shevchenko
[off-list ref] wrote:
...
quoted
+#define MT6370_REG_DEV_INFO 0x100
+#define MT6370_REG_CHG_IRQ1 0x1C0
+#define MT6370_REG_CHG_MASK1 0x1E0
+
+#define MT6370_VENID_MASK GENMASK(7, 4)
+
+#define MT6370_NUM_IRQREGS 16
+#define MT6370_USBC_I2CADDR 0x4E
quoted
+#define MT6370_REG_ADDRLEN 2
+#define MT6370_REG_MAXADDR 0x1FF
These two more logically to have near to other _REG_* definitions above.
Hi Andy,
Thanks for your review.
Do you mean that we should move '#define MT6370_USBC_I2CADDR' and
'#define MT6370_REG_MAXADDR' after the line '#define
MT6370_REG_CHG_MASK1'?
-------------------------------------------------------------------
#define MT6370_REG_DEV_INFO 0x100
#define MT6370_REG_CHG_IRQ1 0x1C0
#define MT6370_REG_CHG_MASK1 0x1E0
#define MT6370_USBC_I2CADDR 0x4E
#define MT6370_REG_MAXADDR 0x1FF
#define MT6370_VENID_MASK GENMASK(7, 4)
#define MT6370_NUM_IRQREGS 16
#define MT6370_REG_ADDRLEN 2
-------------------------------------------------------------------
Like this?
--
With Best Regards,
Andy Shevchenko
--
Best Regards,
ChiaEn Wu