Re: [PATCH 0/4] drm/tiny: Add driver for Solomon SSD1307 OLED displays

Hello Sam,

On 2/1/22 21:40, Sam Ravnborg wrote:

[snip]

I took a look at the datasheets - and all ssd1305, ssd1306 and ssd1307
are the same. They have timing constrains on the Vcc.
The random schematic I found on the net showed me that a PWM was used to
control the Vcc voltage - which again is used to control the brightness.

All the above has nothing to do with backlight - I had this mixed up in
my head.

Yes, same here. I was leaning towards fixing the DT binding but then due
Geert comment and after reading the datasheets for ssd130{5,6,7} like you
I had the same understanding.

Glad that you agree.

[snip] 

Last I recommend to drop the fbdev variant - if the drm driver has any
regressions we can fix them. And I do not see any other way to move
users over. Unless their setup breaks then they do not change.

As I mentioned in this thread I wouldn't propose to drop the fbdev variant.
I prefer to use the carrot and not the stick. Peter Robinson suggested to
make the driver mutually exclusive and add !FB_SSD1307 in the config symbol.

I think that makes sense and will do it in v2.

Best regards,
-- 
Javier Martinez Canillas
Linux Engineering
Red Hat