On Mon, Jun 21, 2021 at 02:21:47PM +0200, Uwe Kleine-König wrote:
According to <linux/backlight.h> .update_status() is supposed to
return 0 on success and a negative error code otherwise. Adapt
lm3630a_bank_a_update_status() and lm3630a_bank_b_update_status() to
actually do it.
While touching that also add the error code to the failure message.
Signed-off-by: Uwe Kleine-König <redacted>
Reviewed-by: Daniel Thompson <redacted>
Daniel.
quoted hunk ↗ jump to hunk
---
drivers/video/backlight/lm3630a_bl.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/video/backlight/lm3630a_bl.c b/drivers/video/backlight/lm3630a_bl.c
index e88a2b0e5904..7140b0d98082 100644
--- a/drivers/video/backlight/lm3630a_bl.c
+++ b/drivers/video/backlight/lm3630a_bl.c
@@ -190,7 +190,7 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
if ((pwm_ctrl & LM3630A_PWM_BANK_A) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
- return bl->props.brightness;
+ return 0;
}
/* disable sleep */@@ -210,8 +210,8 @@ static int lm3630a_bank_a_update_status(struct backlight_device *bl)
return 0;
out_i2c_err:
- dev_err(pchip->dev, "i2c failed to access\n");
- return bl->props.brightness;
+ dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+ return ret;
}
static int lm3630a_bank_a_get_brightness(struct backlight_device *bl)
@@ -267,7 +267,7 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
if ((pwm_ctrl & LM3630A_PWM_BANK_B) != 0) {
lm3630a_pwm_ctrl(pchip, bl->props.brightness,
bl->props.max_brightness);
- return bl->props.brightness;
+ return 0;
}
/* disable sleep */@@ -287,8 +287,8 @@ static int lm3630a_bank_b_update_status(struct backlight_device *bl)
return 0;
out_i2c_err:
- dev_err(pchip->dev, "i2c failed to access REG_CTRL\n");
- return bl->props.brightness;
+ dev_err(pchip->dev, "i2c failed to access (%pe)\n", ERR_PTR(ret));
+ return ret;
}
static int lm3630a_bank_b_get_brightness(struct backlight_device *bl)
--
2.30.2