Re: [PATCH v6 1/4] mfd: rt4831: Adds support for Richtek RT4831

From
Lee Jones <hidden>
Date
2021-04-19 07:22:38
Also in
dri-devel, lkml
Reply to
ChiYuan Huang, 2021-04-19
On Mon, 19 Apr 2021, ChiYuan Huang wrote:
Hi, Linux mfd reviewers:
   It's been three weeks not to get any response from you.
Is there something wrong about this mfd patch?
If yes, please feel free to let me know.
Couple of things:

First, if you think a patch had fallen through the gaps, which does
happen sometimes, it is generally considered acceptable to submit a
[RESEND] ~2 weeks after the initial submission.  FYI: This was such a
patch.  It was not on, or had fallen off of my radar for some reason.

Secondly, we are really late in the release cycle.  -rc8 has just been
released.  Quite a few maintainers slow down at ~-rc6.  Particularly
for new drivers.

No need to resubmit this driver this time.  It is now on my to-review
list and I will tend to it shortly.

Thanks for your patience.
cy_huang [off-list ref] 於 2021年3月28日 週日 下午11:24寫道:
quoted
From: ChiYuan Huang <redacted>

This adds support Richtek RT4831 core. It includes four channel WLED driver
and Display Bias Voltage outputs.

Signed-off-by: ChiYuan Huang <redacted>
---
The RT4831 regulator patches are already on main stream, and can be referred to
9351ab8b0cb6 regulator: rt4831: Adds support for Richtek RT4831 DSV regulator
934b05e81862 regulator: rt4831: Adds DT binding document for Richtek RT4831 DSV regulator

since v6
- Respin the date from 2020 to 2021.
- Rmove the shutdown routine.
- Change the macro OF_MFD_CELL to MFD_CELL_OF.


since v5
- Rename file name from rt4831-core.c to rt4831.c
- Change RICHTEK_VID to RICHTEK_VENDOR_ID.
- Change gpio_desc nameing from 'enable' to 'enable_gpio' in probe.
- Change variable 'val' to the meaningful name 'chip_id'.
- Refine the error log when vendor id is not matched.
- Remove of_match_ptr.

since v2
- Refine Kconfig descriptions.
- Add copyright.
- Refine error logs in probe.
- Refine comment lines in remove and shutdown.
---
 drivers/mfd/Kconfig  |  10 +++++
 drivers/mfd/Makefile |   1 +
 drivers/mfd/rt4831.c | 115 +++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 126 insertions(+)
 create mode 100644 drivers/mfd/rt4831.c
-- 
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
Thread (14 messages) 14 messages, 3 authors, last reply 2021-04-23
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help