[PATCH v2 RESEND] ARM/fbdev: sa11x0: Switch to use GPIO descriptors
From: Linus Walleij <hidden>
Date: 2020-04-15 16:53:10
Also in:
linux-arm-kernel
Subsystem:
arm port, framebuffer layer, the rest · Maintainers:
Russell King, Helge Deller, Linus Torvalds
This converts the SA11x0 frame buffer driver to use GPIO descriptors. Get the GPIO optional and register a look-up table specifically for the Shannon machine. Cc: Russell King <linux@armlinux.org.uk> Cc: Bartlomiej Zolnierkiewicz <redacted> Signed-off-by: Linus Walleij <redacted> --- ChangeLog v1->v2: - Rename the GPIO line to "shannon-lcden" as this GPIO line has semantics that are particular to the Shannon platform. --- arch/arm/mach-sa1100/shannon.c | 9 +++++++++ drivers/video/fbdev/sa1100fb.c | 20 +++++++++----------- drivers/video/fbdev/sa1100fb.h | 3 +++ 3 files changed, 21 insertions(+), 11 deletions(-)
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index 5bc82e2671c6..351f891b4842 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c@@ -104,6 +104,14 @@ static struct fixed_voltage_config shannon_cf_vcc_pdata __initdata = { .enabled_at_boot = 1, }; +static struct gpiod_lookup_table shannon_display_gpio_table = { + .dev_id = "sa11x0-fb", + .table = { + GPIO_LOOKUP("gpio", 22, "shannon-lcden", GPIO_ACTIVE_HIGH), + { }, + }, +}; + static void __init shannon_init(void) { sa11x0_register_fixed_regulator(0, &shannon_cf_vcc_pdata,
@@ -113,6 +121,7 @@ static void __init shannon_init(void) sa11x0_register_pcmcia(0, &shannon_pcmcia0_gpio_table); sa11x0_register_pcmcia(1, &shannon_pcmcia1_gpio_table); sa11x0_ppc_configure_mcp(); + gpiod_add_lookup_table(&shannon_display_gpio_table); sa11x0_register_lcd(&shannon_lcd_info); sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); sa11x0_register_mcp(&shannon_mcp_data);
diff --git a/drivers/video/fbdev/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 2d285cc384cf..3e6e13f7a831 100644
--- a/drivers/video/fbdev/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c@@ -173,7 +173,7 @@ #include <linux/init.h> #include <linux/ioport.h> #include <linux/cpufreq.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/mutex.h>
@@ -799,8 +799,8 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi) writel_relaxed(fbi->dbar2, fbi->base + DBAR2); writel_relaxed(fbi->reg_lccr0 | LCCR0_LEN, fbi->base + LCCR0); - if (machine_is_shannon()) - gpio_set_value(SHANNON_GPIO_DISP_EN, 1); + if (fbi->shannon_lcden) + gpiod_set_value(fbi->shannon_lcden, 1); dev_dbg(fbi->dev, "DBAR1: 0x%08x\n", readl_relaxed(fbi->base + DBAR1)); dev_dbg(fbi->dev, "DBAR2: 0x%08x\n", readl_relaxed(fbi->base + DBAR2));
@@ -817,8 +817,8 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi) dev_dbg(fbi->dev, "Disabling LCD controller\n"); - if (machine_is_shannon()) - gpio_set_value(SHANNON_GPIO_DISP_EN, 0); + if (fbi->shannon_lcden) + gpiod_set_value(fbi->shannon_lcden, 0); set_current_state(TASK_UNINTERRUPTIBLE); add_wait_queue(&fbi->ctrlr_wait, &wait);
@@ -1173,12 +1173,10 @@ static int sa1100fb_probe(struct platform_device *pdev) return ret; } - if (machine_is_shannon()) { - ret = devm_gpio_request_one(&pdev->dev, SHANNON_GPIO_DISP_EN, - GPIOF_OUT_INIT_LOW, "display enable"); - if (ret) - return ret; - } + fbi->shannon_lcden = gpiod_get_optional(&pdev->dev, "shannon-lcden", + GPIOD_OUT_LOW); + if (IS_ERR(fbi->shannon_lcden)) + return PTR_ERR(fbi->shannon_lcden); /* Initialize video memory */ ret = sa1100fb_map_video_memory(fbi);
diff --git a/drivers/video/fbdev/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index d0aa33b0b88a..b4363444fa5d 100644
--- a/drivers/video/fbdev/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h@@ -10,6 +10,8 @@ * for more details. */ +struct gpio_desc; + #define LCCR0 0x0000 /* LCD Control Reg. 0 */ #define LCSR 0x0004 /* LCD Status Reg. */ #define DBAR1 0x0010 /* LCD DMA Base Address Reg. channel 1 */
@@ -33,6 +35,7 @@ struct sa1100fb_info { struct device *dev; const struct sa1100fb_rgb *rgb[NR_RGB]; void __iomem *base; + struct gpio_desc *shannon_lcden; /* * These are the addresses we mapped
--
2.25.2