Re: [PATCH 4/4] ARM: mxs: cfa10036: Fixup OLED display reset

There was a bug in reset signal generation in ssd1307fb OLED driver.
The display needs an active-low reset signal but the driver produced
the correct sequence only if the GPIO used for reset was specified as
GPIO_ACTIVE_HIGH.

Now as the OLED driver is fixed it is also necessarry to implement
a fixup for all current users of the old DT ABI. There is only one
in-tree user and that is the Crystalfontz CFA-10036 board. In case
this board is booting and GPIO_ACTIVE_HIGH is used for reset we
override it to GPIO_ACTIVE_LOW.

Signed-off-by: Michal Vokáč <redacted>
---
 arch/arm/mach-mxs/mach-mxs.c | 45 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 45 insertions(+)

diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 1c6062d..23c260c 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c

@@ -21,6 +21,7 @@
 #include <linux/reboot.h>
 #include <linux/micrel_phy.h>
 #include <linux/of_address.h>
+#include <linux/of_gpio.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>

@@ -268,9 +269,53 @@ static void __init apx4devkit_init(void)
 					   apx4devkit_phy_fixup);
 }
 
+#define OLED_RESET_GPIO_LEN	3
+#define OLED_RESET_GPIO_SIZE	(OLED_RESET_GPIO_LEN * sizeof(u32))
+
+static void __init crystalfontz_oled_reset_fixup(void)
+{
+	struct property *newgpio;
+	struct device_node *np;
+	u32 *gpiospec;
+	int i, ret;
+
+	np = of_find_compatible_node(NULL, NULL, "solomon,ssd1306fb-i2c");
+	if (!np)
+		return;
+
+	newgpio = kzalloc(sizeof(*newgpio) + OLED_RESET_GPIO_SIZE, GFP_KERNEL);
+	if (!newgpio)
+		return;
+
+	newgpio->value = newgpio + 1;
+	newgpio->length = OLED_RESET_GPIO_SIZE;
+	newgpio->name = kstrdup("reset-gpios", GFP_KERNEL);
+	if (!newgpio->name) {
+		kfree(newgpio);
+		return;
+	}
+
+	gpiospec = newgpio->value;
+	for (i = 0; i < OLED_RESET_GPIO_LEN; i++) {
+		ret = of_property_read_u32_index(np, "reset-gpios", i,
+						 &gpiospec[i]);