Re: [RESEND PATCH v2 2/3] video: ssd1307fb: Do not hard code active-low reset sequence
flat view
From: Bartlomiej Zolnierkiewicz <hidden>
Date: 2018-10-08 10:53:55
Also in:
linux-devicetree, lkml
On 09/27/2018 11:24 AM, Michal Vokáč wrote:
The SSD130x OLED display reset signal is active low. Now the reset sequence is implemented in such a way that users are forced to define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work. Do not hard code the active-low sequence into the driver but instead allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect the real world. Signed-off-by: Michal Vokáč <redacted>
Patch queued for 4.20, thanks. Best regards, -- Bartlomiej Zolnierkiewicz Samsung R&D Institute Poland Samsung Electronics