The SSD130x OLED display reset signal is active low. Now the reset
sequence is implemented in such a way that users are forced to
define reset-gpios as GPIO_ACTIVE_HIGH in DT to make the reset work.
Do not hard code the active-low sequence into the driver but instead
allow the user to specify the gpio as GPIO_ACTIVE_LOW to reflect
the real world.
Signed-off-by: Michal Vokáč <redacted>
---
v2 changes: Split the DT changes into separate patch.
drivers/video/fbdev/ssd1307fb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index e7ae135..7b5bc42 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
@@ -728,10 +728,10 @@ static int ssd1307fb_probe(struct i2c_client *client,
if (par->reset) {
/* Reset the screen */
- gpiod_set_value_cansleep(par->reset, 0);
- udelay(4);
gpiod_set_value_cansleep(par->reset, 1);
udelay(4);
+ gpiod_set_value_cansleep(par->reset, 0);
+ udelay(4);
}
if (par->vbat_reg) {--
2.1.4