@@ -11,7 +11,7 @@ Description:
   Kernel code may export it for complete or partial access.
 
   GPIOs are identified as they are inside the kernel, using integers in
-  the range 0..INT_MAX.  See Documentation/gpio/gpio.txt for more information.
+  the range 0..INT_MAX.  See Documentation/gpio for more information.
 
     /sys/class/gpio
 	/export ... asks the kernel to export a GPIO to userspace

@@ -30,7 +30,7 @@ Optional properties:
   - nxp,calib-gpios: calibration GPIO, which must correspond with the
 	gpio used for the TDA998x interrupt pin.
 
-[1] Documentation/sound/alsa/soc/DAI.txt
+[1] Documentation/sound/soc/dai.rst
 [2] include/dt-bindings/display/tda998x.h
 
 Example:

@@ -8,7 +8,7 @@ Event Tracing
 1. Introduction
 ======= 
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used
 without creating custom kernel modules to register probe functions
 using the event tracing infrastructure.
 

@@ -6,7 +6,7 @@ Notes on Analysing Behaviour Using Events and Tracepoints
 1. Introduction
 ======= 
-Tracepoints (see Documentation/trace/tracepoints.txt) can be used without
+Tracepoints (see Documentation/trace/tracepoints.rst) can be used without
 creating custom kernel modules to register probe functions using the event
 tracing infrastructure.
 

@@ -107,7 +107,7 @@ Linux 2.6:
 		程序测试的指导，请参阅
 		Documentation/power/drivers-testing.txt。有关驱动程序电
 		源管理问题相对全面的概述，请参阅
-		Documentation/power/admin-guide/devices.rst。
+		Documentation/driver-api/pm/devices.rst。
 
 管理：		如果一个驱动程序的作者还在进行有效的维护，那么通常除了那
 		些明显正确且不需要任何检查的补丁以外，其他所有的补丁都会

@@ -1,4 +1,4 @@
-Chinese translated version of Documentation/gpio.txt
+Chinese translated version of Documentation/gpio
 
 If you have any comment or update to the content, please contact the
 original document maintainer directly.  However, if you have a problem

@@ -10,7 +10,7 @@ Maintainer: Grant Likely <grant.likely@secretlab.ca>
 		Linus Walleij <linus.walleij@linaro.org>
 Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
 ---------------------------------------------------------------------
-Documentation/gpio.txt 的中文翻译
+Documentation/gpio 的中文翻译
 
 如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文
 交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻

@@ -13312,7 +13312,7 @@ L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
 S:	Supported
 F:	Documentation/devicetree/bindings/sound/
-F:	Documentation/sound/alsa/soc/
+F:	Documentation/sound/soc/
 F:	sound/soc/
 F:	include/sound/soc*
 

@@ -14,7 +14,7 @@ config USB_HID
 
 	  You can't use this driver and the HIDBP (Boot Protocol) keyboard
 	  and mouse drivers at the same time. More information is available:
-	  <file:Documentation/input/input.txt>.
+	  <file:Documentation/input/input.rst>.
 
 	  If unsure, say Y.
 

@@ -16,7 +16,7 @@ config INPUT
 
 	  Say N here if you have a headless (no monitor, no keyboard) system.
 
-	  More information is available: <file:Documentation/input/input.txt>
+	  More information is available: <file:Documentation/input/input.rst>
 
 	  If unsure, say Y.
 

@@ -144,7 +144,7 @@ config INPUT_JOYDEV
 
 	  If unsure, say Y.
 
-	  More information is available: <file:Documentation/input/joystick.txt>
+	  More information is available: <file:Documentation/input/joydev/joystick.rst>
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called joydev.

@@ -9,7 +9,7 @@ menuconfig INPUT_JOYSTICK
 	  and the list of supported devices will be displayed. This option
 	  doesn't affect the kernel.
 
-	  Please read the file <file:Documentation/input/joystick.txt> which
+	  Please read the file <file:Documentation/input/joydev/joystick.rst> which
 	  contains more information.
 
 if INPUT_JOYSTICK

@@ -25,7 +25,7 @@ config JOYSTICK_ANALOG
 	  Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or
 	  Saitek Cyborg joysticks.
 
-	  Please read the file <file:Documentation/input/joystick.txt> which
+	  Please read the file <file:Documentation/input/joydev/joystick.rst> which
 	  contains more information.
 
 	  To compile this driver as a module, choose M here: the

@@ -27,6 +27,6 @@ config JOYSTICK_IFORCE_232
 	  connected to your serial (COM) port.
 
 	  You will need an additional utility called inputattach, see
-	  <file:Documentation/input/joystick.txt>
-	  and <file:Documentation/input/ff.txt>.
+	  <file:Documentation/input/joydev/joystick.rst>
+	  and <file:Documentation/input/ff.rst>.
 

@@ -47,7 +47,7 @@ config SERIO_SERPORT
 	  Say Y here if you plan to use an input device (mouse, joystick,
 	  tablet, 6dof) that communicates over the RS232 serial (COM) port.
 
-	  More information is available: <file:Documentation/input/input.txt>
+	  More information is available: <file:Documentation/input/input.rst>
 
 	  If unsure, say Y.
 

@@ -78,7 +78,7 @@ config SERIO_PARKBD
 	  Say Y here if you built a simple parallel port adapter to attach
 	  an additional AT keyboard, XT keyboard or PS/2 mouse.
 
-	  More information is available: <file:Documentation/input/input.txt>
+	  More information is available: <file:Documentation/input/input.rst>
 
 	  If unsure, say N.
 

@@ -11,7 +11,7 @@ pool management for network interfaces.
 This document provides an overview the Linux DPIO driver, its
 subcomponents, and its APIs.
 
-See Documentation/dpaa2/overview.txt for a general overview of DPAA2
+See Documentation/networking/dpaa2/overview.rst for a general overview of DPAA2
 and the general DPAA2 driver architecture in Linux.
 
 Driver Overview

@@ -836,7 +836,7 @@ static void xxxfb_remove(struct pci_dev *dev)
  *	@dev: PCI device
  *	@msg: the suspend event code.
  *
- *      See Documentation/power/admin-guide/devices.rst for more information
+ *      See Documentation/driver-api/pm/devices.rst for more information
  */
 static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
 {

@@ -851,7 +851,7 @@ static int xxxfb_suspend(struct pci_dev *dev, pm_message_t msg)
  *	xxxfb_resume - Optional but recommended function. Resume the device.
  *	@dev: PCI device
  *
- *      See Documentation/power/admin-guide/devices.rst for more information
+ *      See Documentation/driver-api/pm/devices.rst for more information
  */
 static int xxxfb_resume(struct pci_dev *dev)
 {

@@ -915,7 +915,7 @@ static void __exit xxxfb_exit(void)
  *	@dev: platform device
  *	@msg: the suspend event code.
  *
- *      See Documentation/power/admin-guide/devices.rst for more information
+ *      See Documentation/driver-api/pm/devices.rst for more information
  */
 static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
 {

@@ -930,7 +930,7 @@ static int xxxfb_suspend(struct platform_device *dev, pm_message_t msg)
  *	xxxfb_resume - Optional but recommended function. Resume the device.
  *	@dev: platform device
  *
- *      See Documentation/power/admin-guide/devices.rst for more information
+ *      See Documentation/driver-api/pm/devices.rst for more information
  */
 static int xxxfb_resume(struct platform_dev *dev)
 {

@@ -4,7 +4,7 @@
 /*
  * Kernel Tracepoint API.
  *
- * See Documentation/trace/tracepoints.txt.
+ * See Documentation/trace/tracepoints.rst.
  *
  * Copyright (C) 2008-2014 Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
  *

@@ -509,7 +509,7 @@ static inline int may_allow_all(struct dev_cgroup *parent)
  * This is one of the three key functions for hierarchy implementation.
  * This function is responsible for re-evaluating all the cgroup's active
  * exceptions due to a parent's exception change.
- * Refer to Documentation/cgroups/devices.txt for more details.
+ * Refer to Documentation/cgroup-v1/devices.txt for more details.
  */
 static void revalidate_active_exceptions(struct dev_cgroup *devcg)
 {