Re: [PATCH V2 2/2] efi/fb: Convert PCI bus address to resource if translated by the bridge

On 13 June 2018 at 17:17,  [off-list ref] wrote:

On 2018-06-13 11:06, Ard Biesheuvel wrote:

quoted

On 13 June 2018 at 16:22, Sinan Kaya [off-list ref] wrote:

quoted

Hi Ard,

On 5/18/2018 10:17 AM, Sinan Kaya wrote:

quoted

A host bridge is allowed to remap BAR addresses using _TRA attribute in
_CRS windows.

pci_bus 0000:00: root bus resource [mem 0x80100100000-0x8011fffffff
window] (bus address [0x00100000-0x1fffffff])
pci 0000:02:00.0: reg 0x10: [mem 0x8011e000000-0x8011effffff]

When a VGA device is behind such a host bridge and the resource is
translated efifb driver is trying to do ioremap against bus address
rather than the resource address and is failing to probe.

efifb: probing for efifb
efifb: cannot reserve video memory at 0x1e000000
efifb: framebuffer at 0x1e000000, using 1920k, total 1875k
efifb: mode is 800x600x32, linelength200, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift$:16:8:0

Use the host bridge offset information to convert bus address to
resource address in the fixup.

Signed-off-by: Sinan Kaya <redacted>
---

I didn't see any messages about these getting picked up for 4.18.

Are they queued on your own branch?

No, you never cc'ed me on them until now.

Ouch, I hoped that you would get it via get_maintainer script. Sorry for
that.

Actually, get_maintainer is right: this should go through the fbdev
tree not the EFI tree

Were you going to resend them? If not, I can find them in my archive
and ack them, and we will ask Bartlomiej to take them for v4.19