Re: [Intel-gfx] [PATCH v6 5/7] drm/i915: Add "panel orientation" property to the panel connector, v6
flat view
From: Daniel Vetter <hidden>
Date: 2017-11-28 10:25:59
Also in:
dri-devel, intel-gfx
On Sat, Nov 25, 2017 at 06:33:39PM +0100, Hans de Goede wrote:
Ideally we could use the VBT for this, that would be simple, in intel_dsi_init() check dev_priv->vbt.dsi.config->rotation, set connector->display_info.panel_orientation accordingly and call drm_connector_init_panel_orientation_property(), done. Unfortunately vbt.dsi.config->rotation is always 0 even on tablets with an upside down LCD and where the GOP is properly rotating the EFI fb in hardware. So instead we end up reading the rotation from the primary plane. This commit only implements the panel orientation property for DSI panels on BYT / CHT hardware, as all known non normal oriented panels sofar are only found on this hardware. Changes in v2: -Read back the rotation applied by the GOP from the primary plane instead of relying on dev_priv->vbt.dsi.config->rotation, because it seems that the VBT rotation filed is always 0 even on devices where the GOP does apply a rotation Changes in v3: -Rewrite the code to read back the orientation from the primary plane to contain all of this in intel_dsi.c instead of poking a bunch of holes between all the different layers Changes in v6: -Move hardware readout to intel_dsi_init()
Yeah, this is what I had in mind. A small hack, but much more well contained. Reviewed-by: Daniel Vetter <redacted>
quoted hunk ↗ jump to hunk
Signed-off-by: Hans de Goede <redacted> --- drivers/gpu/drm/i915/intel_dsi.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index f09474b0c4d3..f67d321376e4 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c@@ -1666,6 +1666,27 @@ static const struct drm_connector_funcs intel_dsi_connector_funcs = { .atomic_duplicate_state = intel_digital_connector_duplicate_state, }; +static int intel_dsi_get_panel_orientation(struct intel_connector *connector) +{ + struct drm_i915_private *dev_priv = to_i915(connector->base.dev); + int orientation = DRM_MODE_PANEL_ORIENTATION_NORMAL; + enum i9xx_plane_id plane; + u32 val; + + if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) { + if (connector->encoder->crtc_mask = BIT(PIPE_B)) + plane = PLANE_B; + else + plane = PLANE_A; + + val = I915_READ(DSPCNTR(plane)); + if (val & DISPPLANE_ROTATE_180) + orientation = DRM_MODE_PANEL_ORIENTATION_BOTTOM_UP; + } + + return orientation; +} + static void intel_dsi_add_properties(struct intel_connector *connector) { struct drm_i915_private *dev_priv = to_i915(connector->base.dev);@@ -1681,6 +1702,13 @@ static void intel_dsi_add_properties(struct intel_connector *connector) allowed_scalers); connector->base.state->scaling_mode = DRM_MODE_SCALE_ASPECT; + + connector->base.display_info.panel_orientation > + intel_dsi_get_panel_orientation(connector); + drm_connector_init_panel_orientation_property( + &connector->base, + connector->panel.fixed_mode->hdisplay, + connector->panel.fixed_mode->vdisplay); } }-- 2.14.3 _______________________________________________ Intel-gfx mailing list Intel-gfx@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/intel-gfx
-- Daniel Vetter Software Engineer, Intel Corporation http://blog.ffwll.ch