Re: [PATCH V1 2/4] qcom: spmi-wled: Add support for short circuit handling

On 2017-11-18 02:00, Rob Herring wrote:

On Thu, Nov 16, 2017 at 05:48:35PM +0530, Kiran Gunda wrote:

quoted

Handle the short circuit(SC) interrupt and check if the SC interrupt
is valid. Re-enable the module to check if it goes away. Disable the
module altogether if the SC event persists.

Signed-off-by: Kiran Gunda <redacted>
---
 .../bindings/leds/backlight/qcom-spmi-wled.txt     |  22 ++++

... and also put all the binding in one patch. I want to review the 
full
view of the h/w, not piecemeal.

Sure. Will send the next series with the changes suggested.

quoted

 drivers/video/backlight/qcom-spmi-wled.c           | 126 
++++++++++++++++++++-
 2 files changed, 142 insertions(+), 6 deletions(-)