[PATCH 2/2] dt-bindings: display: imx: entry for AUS mode
From: Martin Kaiser <hidden>
Date: 2017-04-21 10:30:02
Also in:
linux-devicetree, lkml
Subsystem:
drm drivers, drm drivers and misc gpu patches, drm drivers for freescale imx 5/6, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Philipp Zabel, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Allow setting AUS mode for a display from the device tree. Use an optional boolean property. AUS mode can be set only on imx21 and compatible chipsets. Signed-off-by: Martin Kaiser <redacted> Acked-by: Rob Herring <robh@kernel.org> --- v4: rename the DT property to fsl,aus-mode v3: use a boolean DT property instead of the register value separate patches for DT binding and code changes v2: re-sending DT bindings and code changes as one patch Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
index 7a5c0e2..e5a8b36 100644
--- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt@@ -13,6 +13,8 @@ Required nodes: Additional, the display node has to define properties: - bits-per-pixel: Bits per pixel - fsl,pcr: LCDC PCR value + A display node may optionally define + - fsl,aus-mode: boolean to enable AUS mode (only for imx21) Optional properties: - lcd-supply: Regulator for LCD supply voltage.
--
2.1.4