omapfb: dss: Handle return error in dss_init_ports.

Started by Arvind Yadav on Feb 3, 2017 · 6 messages from 2 authors · Last reply Feb 9, 2017

Subsystems (3)

Maintainers (2)

STALE3570d

open the first message on its own page

Message details and related content
Here, dss_init_ports is not handling return error form
dpi_init_port and sdi_init_port. Now dss_init_ports is returning
always 0. And it's making below code as a dead code.

static int dss_bind(struct device *dev)
{
  .
  .
  r = dss_init_ports(pdev); //dss_init_ports will return always 0
  if (r)// This condition will always false
      goto err_init_ports; //Dead Code
  .
  .
}

This change is to handle return error from dpi_init_port and
sdi_init_port. Also, It will remove dead code from function 'dss_bind'.

Signed-off-by: Arvind Yadav <redacted>
---
 drivers/video/fbdev/omap2/omapfb/dss/dss.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
index 47d7f69..15a0dab 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
@@ -946,6 +946,7 @@ static int dss_init_ports(struct platform_device *pdev)
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
 	int r;
+	int ret = 0;
 
 	if (parent = NULL)
 		return 0;
@@ -972,17 +973,17 @@ static int dss_init_ports(struct platform_device *pdev)
 
 		switch (port_type) {
 		case OMAP_DISPLAY_TYPE_DPI:
-			dpi_init_port(pdev, port);
+			ret = dpi_init_port(pdev, port);
 			break;
 		case OMAP_DISPLAY_TYPE_SDI:
-			sdi_init_port(pdev, port);
+			ret = sdi_init_port(pdev, port);
 			break;
 		default:
 			break;
 		}
 	} while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
 
-	return 0;
+	return ret;
 }
 
 static void dss_uninit_ports(struct platform_device *pdev)
-- 
1.9.1
Message details and related content
Hi,

On Friday, February 03, 2017 05:53:45 PM Arvind Yadav wrote:
quoted hunk
Here, dss_init_ports is not handling return error form
dpi_init_port and sdi_init_port. Now dss_init_ports is returning
always 0. And it's making below code as a dead code.

static int dss_bind(struct device *dev)
{
  .
  .
  r = dss_init_ports(pdev); //dss_init_ports will return always 0
  if (r)// This condition will always false
      goto err_init_ports; //Dead Code
  .
  .
}

This change is to handle return error from dpi_init_port and
sdi_init_port. Also, It will remove dead code from function 'dss_bind'.

Signed-off-by: Arvind Yadav <redacted>
---
 drivers/video/fbdev/omap2/omapfb/dss/dss.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/dss/dss.c b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
index 47d7f69..15a0dab 100644
--- a/drivers/video/fbdev/omap2/omapfb/dss/dss.c
+++ b/drivers/video/fbdev/omap2/omapfb/dss/dss.c
@@ -946,6 +946,7 @@ static int dss_init_ports(struct platform_device *pdev)
 	struct device_node *parent = pdev->dev.of_node;
 	struct device_node *port;
 	int r;
+	int ret = 0;
 
 	if (parent = NULL)
 		return 0;
@@ -972,17 +973,17 @@ static int dss_init_ports(struct platform_device *pdev)
 
 		switch (port_type) {
 		case OMAP_DISPLAY_TYPE_DPI:
-			dpi_init_port(pdev, port);

10 more quoted lines

Shouldn't initialization be stopped after the first failure?

i.e.:

	} while (!ret && (port = omapdss_of_get_next_port(parent, port)) != NULL);

Also the cleanup of the partial initialization is missing.
From looking at the code we should do something like this
before returning:

	if (ret)
		dss_uninit_ports(pdev);

(dpi_uninit_port() & sdi_uninit_port() skip not fully
initialized ports)
quoted hunk
-	return 0;
+	return ret;
 }
 
 static void dss_uninit_ports(struct platform_device *pdev)
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
Message details and related content
Hi,

In dss_init_ports, There is no need to add dss_uninit_ports before 
returning.
Because it's already take care in dss_bind. dss_bind  is handling
dss_uninit_ports in error path.

-Arvind


On Monday 06 February 2017 08:58 PM, Bartlomiej Zolnierkiewicz wrote:
dpi_uninit_port() & sdi_uninit_port() skip not fully
initialized port
Message details and related content
Hi,

On Tuesday, February 07, 2017 05:41:37 PM Arvind Yadav wrote:
Hi,

In dss_init_ports, There is no need to add dss_uninit_ports before 
returning.
Because it's already take care in dss_bind. dss_bind  is handling
dss_uninit_ports in error path.
It doesn't handle cleanup of partially initialized ports,
please look at the code:

...
	r = dss_init_ports(pdev);
	if (r)
		goto err_init_ports;
...
err_runtime_get:
	pm_runtime_disable(&pdev->dev);
	dss_uninit_ports(pdev);
err_init_ports:
	if (dss.video1_pll)
		dss_video_pll_uninit(dss.video1_pll);
...

dss_uninit_ports() is not called on partially initialized
ports (when dss_init_ports() returns an error we go straight
into err_init_ports label and skip dss_uninit_ports())
-Arvind


On Monday 06 February 2017 08:58 PM, Bartlomiej Zolnierkiewicz wrote:
quoted
dpi_uninit_port() & sdi_uninit_port() skip not fully
initialized port
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
Message details and related content
On Wednesday, February 08, 2017 11:25:47 AM Bartlomiej Zolnierkiewicz wrote:
Hi,

On Tuesday, February 07, 2017 05:41:37 PM Arvind Yadav wrote:
quoted
Hi,

In dss_init_ports, There is no need to add dss_uninit_ports before 
returning.
Because it's already take care in dss_bind. dss_bind  is handling
dss_uninit_ports in error path.
It doesn't handle cleanup of partially initialized ports,
BTW by "partially initialized ports" here I mean cases like
i.e. dpi port fully initialized and sdi one not initialized
please look at the code:

...
	r = dss_init_ports(pdev);
	if (r)
		goto err_init_ports;
...
err_runtime_get:
	pm_runtime_disable(&pdev->dev);
	dss_uninit_ports(pdev);
err_init_ports:
	if (dss.video1_pll)
		dss_video_pll_uninit(dss.video1_pll);
...

dss_uninit_ports() is not called on partially initialized
ditto
ports (when dss_init_ports() returns an error we go straight
into err_init_ports label and skip dss_uninit_ports())
quoted
-Arvind


On Monday 06 February 2017 08:58 PM, Bartlomiej Zolnierkiewicz wrote:
quoted
dpi_uninit_port() & sdi_uninit_port() skip not fully
initialized port
Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics
Message details and related content
Hi,
Yes, We will have to handle cleanup of partially initialized ports.
As per your suggestion, I have done the changes.

Thanks
-Arvind

On Wednesday 08 February 2017 07:51 PM, Bartlomiej Zolnierkiewicz wrote:
On Wednesday, February 08, 2017 11:25:47 AM Bartlomiej Zolnierkiewicz wrote:
quoted
Hi,

On Tuesday, February 07, 2017 05:41:37 PM Arvind Yadav wrote:
quoted
Hi,

In dss_init_ports, There is no need to add dss_uninit_ports before
returning.
Because it's already take care in dss_bind. dss_bind  is handling
dss_uninit_ports in error path.
It doesn't handle cleanup of partially initialized ports,
BTW by "partially initialized ports" here I mean cases like
i.e. dpi port fully initialized and sdi one not initialized
quoted
please look at the code:

...
	r = dss_init_ports(pdev);
	if (r)
		goto err_init_ports;
...
err_runtime_get:
	pm_runtime_disable(&pdev->dev);
	dss_uninit_ports(pdev);
err_init_ports:
	if (dss.video1_pll)
		dss_video_pll_uninit(dss.video1_pll);
...

dss_uninit_ports() is not called on partially initialized
ditto
quoted
ports (when dss_init_ports() returns an error we go straight
into err_init_ports label and skip dss_uninit_ports())
quoted
-Arvind


On Monday 06 February 2017 08:58 PM, Bartlomiej Zolnierkiewicz wrote:
quoted
dpi_uninit_port() & sdi_uninit_port() skip not fully

7 more quoted lines

Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help