Re: [PATCH 0/6] fbdev/ssd1307fb: Some changes and improvement

I did not notice the latest update on MAINTAINERS when sending this
series. Added Bartlomiej Zolnierkiewicz [off-list ref] to loop.


On 01/12/17 13:16, Jyri Sarha wrote:

We needed these changes for couple of our evm. Everything else is quite
straight forward, but removing the reset-active-low dts property is a
questionable at least in theory. However, in practice if anyone was
using the property in their device-tree blobs, they have never been
able to get desired effect with mainline kernel.

Jyri Sarha (3):
  fbdev: ssd1307fb: Start to use gpiod API for reset gpio
  fbdev: ssd1307fb: Remove reset-active-low from the DT binding document
  fbdev: ssd1307fb: Make reset gpio devicetree property optional

Tomi Valkeinen (3):
  fbdev/ssd1307fb: add support to enable VBAT
  fbdev/ssd1307fb: clear screen in probe
  fbdev/ssd1307fb: add support to enable VBAT

 .../devicetree/bindings/display/ssd1307fb.txt      |  5 +-
 drivers/video/fbdev/ssd1307fb.c                    | 55 ++++++++++++++--------
 2 files changed, 38 insertions(+), 22 deletions(-)