[PATCH 6/6] fbdev/ssd1307fb: add support to enable VBAT
DORMANTno replies
REVIEWED: 1 (0M)
From: Jyri Sarha <hidden>
Date: 2017-01-12 11:16:32
Also in:
linux-devicetree
Subsystem:
drm drivers, drm drivers and misc gpu patches, open firmware and flattened device tree bindings, the rest · Maintainers:
David Airlie, Simona Vetter, Maarten Lankhorst, Maxime Ripard, Thomas Zimmermann, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
1 review trailer.
Possibly related (same subject, not in this thread)
- 2017-01-12 · Re: [PATCH 6/6] fbdev/ssd1307fb: add support to enable VBAT · Jyri Sarha <hidden>
- 2017-01-12 · Re: [PATCH 6/6] fbdev/ssd1307fb: add support to enable VBAT · Tomi Valkeinen <hidden>
From: Tomi Valkeinen <redacted> SSD1306 needs VBAT when it is wired in charge pump configuration. This patch adds support to the driver to enable VBAT regulator at init time. Signed-off-by: Tomi Valkeinen <redacted> Reviewed-by: Roger Quadros <redacted> Signed-off-by: Jyri Sarha <redacted> --- Documentation/devicetree/bindings/display/ssd1307fb.txt | 1 + 1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt
index 6617df6..209d931 100644
--- a/Documentation/devicetree/bindings/display/ssd1307fb.txt
+++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt@@ -16,6 +16,7 @@ Required properties: Optional properties: - reset-gpios: The GPIO used to reset the OLED display, if available. See Documentation/devicetree/bindings/gpio/gpio.txt for details. + - vbat-supply: The supply for VBAT - solomon,segment-no-remap: Display needs normal (non-inverted) data column to segment mapping - solomon,com-seq: Display uses sequential COM pin configuration
--
1.9.1