[PATCH 4/6] fbdev/ssd1307fb: add support to enable VBAT
DORMANTno replies
From: Jyri Sarha <hidden>
Date: 2017-01-12 11:16:30
Also in:
linux-devicetree
Subsystem:
framebuffer layer, the rest · Maintainers:
Helge Deller, Linus Torvalds
From: Tomi Valkeinen <redacted> SSD1306 needs VBAT when it is wired in charge pump configuration. This patch adds support to the driver to enable VBAT regulator at init time. Signed-off-by: Tomi Valkeinen <redacted> Signed-off-by: Jyri Sarha <redacted> --- drivers/video/fbdev/ssd1307fb.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index 89372af..616a6a3 100644
--- a/drivers/video/fbdev/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c@@ -16,6 +16,7 @@ #include <linux/of_gpio.h> #include <linux/pwm.h> #include <linux/uaccess.h> +#include <linux/regulator/consumer.h> #define SSD1307FB_DATA 0x40 #define SSD1307FB_COMMAND 0x80
@@ -74,6 +75,7 @@ struct ssd1307fb_par { struct pwm_device *pwm; u32 pwm_period; struct gpio_desc *reset; + struct regulator *vbat_reg; u32 seg_remap; u32 vcomh; u32 width;
@@ -574,6 +576,14 @@ static int ssd1307fb_probe(struct i2c_client *client, goto fb_alloc_error; } + par->vbat_reg = devm_regulator_get_optional(&client->dev, "vbat"); + if (IS_ERR(par->vbat_reg)) { + dev_err(&client->dev, "failed to get VBAT regulator: %ld\n", + PTR_ERR(par->vbat_reg)); + ret = PTR_ERR(par->vbat_reg); + goto fb_alloc_error; + } + if (of_property_read_u32(node, "solomon,width", &par->width)) par->width = 96;
@@ -658,9 +668,15 @@ static int ssd1307fb_probe(struct i2c_client *client, udelay(4); } + ret = regulator_enable(par->vbat_reg); + if (ret) { + dev_err(&client->dev, "failed to enable VBAT: %d\n", ret); + goto reset_oled_error; + } + ret = ssd1307fb_init(par); if (ret) - goto reset_oled_error; + goto regulator_enable_error; ret = register_framebuffer(info); if (ret) {
@@ -693,6 +709,8 @@ static int ssd1307fb_probe(struct i2c_client *client, pwm_disable(par->pwm); pwm_put(par->pwm); }; +regulator_enable_error: + regulator_disable(par->vbat_reg); reset_oled_error: fb_deferred_io_cleanup(info); fb_alloc_error:
--
1.9.1