Re: [PATCH v4 2/2] backlight: pwm_bl: Check the PWM state for initial backlight power state
From: Lee Jones <hidden>
Date: 2016-12-09 09:10:53
Also in:
linux-pwm, lkml
On Tue, 22 Nov 2016, Peter Ujfalusi wrote:
If the PWM is not enabled the backlight initially should not be enabled either if we have booted with DT and there is a phandle pointing to the backlight node. The patch extends the checks to decide if we should keep the backlight off initially. Signed-off-by: Peter Ujfalusi <redacted> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by: Thierry Reding <redacted> --- drivers/video/backlight/pwm_bl.c | 4 ++++ 1 file changed, 4 insertions(+)
Applied for v4.11, thanks.
quoted hunk ↗ jump to hunk
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index 5712ddd053dd..d7efcb632f7d 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c@@ -215,6 +215,10 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb) if (!regulator_is_enabled(pb->power_supply)) return FB_BLANK_POWERDOWN; + /* The PWM is disabled, keep it like this */ + if (!pwm_is_enabled(pb->pwm)) + return FB_BLANK_POWERDOWN; + return FB_BLANK_UNBLANK; }
-- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog