[PATCH v5 13/46] backlight: pwm_bl: use pwm_get_args() where appropriate
flat view
STALE3847d
From: Boris Brezillon <hidden>
Date: 2016-03-30 20:17:32
Also in:
dri-devel, intel-gfx, linux-arm-kernel, linux-clk, linux-input, linux-leds, linux-pwm, linux-rockchip, linux-samsung-soc, lkml
Subsystem:
backlight class/subsystem, framebuffer layer, the rest · Maintainers:
Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller, Linus Torvalds
Revision v5 (3 revisions archived).
Revisions (3)
- rfc
- v4 [diff against previous]
- v5 current [diff against previous] re-posted go to this post
The PWM framework has clarified the concept of reference PWM config (the platform dependent config retrieved from the DT or the PWM lookup table) and real PWM state. Use pwm_get_args() when the PWM user wants to retrieve this reference config and not the current state. This is part of the rework allowing the PWM framework to support hardware readout and expose real PWM state even when the PWM has just been requested (before the user calls pwm_config/enable/disable()). Signed-off-by: Boris Brezillon <redacted> --- drivers/video/backlight/pwm_bl.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index a33a290..2479c11 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c@@ -201,6 +201,7 @@ static int pwm_backlight_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct pwm_bl_data *pb; int initial_blank = FB_BLANK_UNBLANK; + struct pwm_args pargs = { }; int ret; if (!data) {
@@ -312,7 +313,8 @@ static int pwm_backlight_probe(struct platform_device *pdev) * set the period from platform data if it has not already been set * via the PWM lookup table. */ - pb->period = pwm_get_period(pb->pwm); + pwm_get_args(pb->pwm, &pargs); + pb->period = pargs.period; if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns;
--
2.5.0