[PATCH v4 24/24] regulator: pwm: properly initialize the ->state field
From: Boris Brezillon <hidden>
Date: 2015-11-16 08:58:35
Also in:
linux-arm-kernel, linux-clk, linux-input, linux-leds, linux-pwm, linux-rockchip, lkml
Subsystem:
the rest, voltage and current regulator framework · Maintainers:
Linus Torvalds, Liam Girdwood, Mark Brown
The ->state field is currently initialized to 0, thus referencing the voltage selector at index 0, which might not reflect the current voltage value. If possible, retrieve the current voltage selector from the PWM state, else return -EINVAL. Signed-off-by: Boris Brezillon <redacted> Tested-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Mark Brown <broonie@kernel.org> --- drivers/regulator/pwm-regulator.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index 9ffdbd6..449e3b3 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c@@ -41,10 +41,35 @@ struct pwm_voltages { /** * Voltage table call-backs */ +static void pwm_regulator_init_state(struct regulator_dev *rdev) +{ + struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); + struct pwm_state pwm_state; + unsigned int dutycycle; + int i; + + pwm_get_state(drvdata->pwm, &pwm_state); + + if (!pwm_state.period) + return; + + dutycycle = (pwm_state.duty_cycle * 100) / pwm_state.period; + + for (i = 0; i < rdev->desc->n_voltages; i++) { + if (dutycycle = drvdata->duty_cycle_table[i].dutycycle) { + drvdata->state = i; + return; + } + } +} + static int pwm_regulator_get_voltage_sel(struct regulator_dev *rdev) { struct pwm_regulator_data *drvdata = rdev_get_drvdata(rdev); + if (drvdata->state < 0) + pwm_regulator_init_state(rdev); + return drvdata->state; }
@@ -211,6 +236,7 @@ static int pwm_regulator_init_table(struct platform_device *pdev, return ret; } + drvdata->state = -EINVAL; drvdata->duty_cycle_table = duty_cycle_table; pwm_regulator_desc.ops = &pwm_regulator_voltage_table_ops; pwm_regulator_desc.n_voltages = length / sizeof(*duty_cycle_table);
--
2.1.4