Thread (3 messages) 3 messages, 3 authors, 2015-10-13

Re: [PATCH v3] video: fbdev: add Marvell PXA LCD controller binding

flat view

From: Rob Herring <robh@kernel.org>
Date: 2015-10-13 18:48:39
Also in: linux-devicetree, lkml

On Mon, Oct 12, 2015 at 6:30 AM, Robert Jarzmik [off-list ref] wrote:
Add documentation for the PXA LCD controller devicetree binding.

Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
Since v1: Philipp's review on the whole binding
Since v2: moved to display/, Philipp's and Rob's review
          dropped panel description, should be a simple panel with a
          lcd-type optional node that could be added to simple-panel.
Applied, thanks.

Rob
quoted hunk ↗ jump to hunk
---
 .../bindings/display/marvell,pxa2xx-lcdc.txt       | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
diff --git a/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
new file mode 100644
index 000000000000..309c47f25b87
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/marvell,pxa2xx-lcdc.txt
@@ -0,0 +1,34 @@
+PXA LCD Controller
+------------------
+
+Required properties:
+ - compatible : one of these
+       "marvell,pxa2xx-lcdc",
+       "marvell,pxa270-lcdc",
+       "marvell,pxa300-lcdc"
+ - reg : should contain 1 register range (address and length).
+ - interrupts : framebuffer controller interrupt.
+ - clocks: phandle to input clocks
+
+Required nodes:
+ - port: connection to the LCD panel (see video-interfaces.txt)
+        This node must have its properties bus-width and remote-endpoint set.
+        If the panel is not a TFT color panel, then a "lcd-type" property in
+        the panel should specify the panel type.
+        This panel node should be in the board dts.
+
+Example:
+       lcd-controller@40500000 {
+               compatible = "marvell,pxa2xx-lcdc";
+               reg = <0x44000000 0x10000>;
+               interrupts = <17>;
+               clocks = <&clks CLK_LCD>;
+               status = "okay";
+
+               port {
+                       lcdc_out: endpoint {
+                               remote-endpoint = <&panel_in>;
+                               bus-width = <16>;
+                       };
+               };
+       };
--
2.1.4
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help