[PATCH v3 3/3] staging: fbtft: access screen buffer directly
flat view
STALE4025d
From: Lars Svensson <hidden>
Date: 2015-10-07 07:20:35
Also in:
lkml
Subsystem:
fbtft framebuffer drivers, staging subsystem, the rest · Maintainers:
Andy Shevchenko, Greg Kroah-Hartman, Linus Torvalds
In fbtft-bus.c:fbtft_write_vmem16_bus9(), ioread8() is used for accessing the provided screen array. Since screen_buffer actually points to an ordinary buffer, instead access it directly. Signed-off-by: Lars Svensson <redacted> --- drivers/staging/fbtft/fbtft-bus.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/staging/fbtft/fbtft-bus.c b/drivers/staging/fbtft/fbtft-bus.c
index f5a36a4..04efe90 100644
--- a/drivers/staging/fbtft/fbtft-bus.c
+++ b/drivers/staging/fbtft/fbtft-bus.c@@ -184,7 +184,7 @@ EXPORT_SYMBOL(fbtft_write_vmem16_bus8); /* 16 bit pixel over 9-bit SPI bus: dc + high byte, dc + low byte */ int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len) { - u8 __iomem *vmem8; + u8 *vmem8; u16 *txbuf16 = par->txbuf.buf; size_t remain; size_t to_copy;
@@ -212,12 +212,12 @@ int fbtft_write_vmem16_bus9(struct fbtft_par *par, size_t offset, size_t len) #ifdef __LITTLE_ENDIAN for (i = 0; i < to_copy; i += 2) { - txbuf16[i] = 0x0100 | ioread8(vmem8 + i + 1); - txbuf16[i + 1] = 0x0100 | ioread8(vmem8 + i); + txbuf16[i] = 0x0100 | vmem8[i + 1]; + txbuf16[i + 1] = 0x0100 | vmem8[i]; } #else for (i = 0; i < to_copy; i++) - txbuf16[i] = 0x0100 | ioread8(vmem8 + i); + txbuf16[i] = 0x0100 | vmem8[i]; #endif vmem8 = vmem8 + to_copy; ret = par->fbtftops.write(par, par->txbuf.buf, to_copy*2);
--
2.4.2