[PATCH v2 04/10] backlight: pwm_bl: remove useless call to pwm_set_period
From: Boris Brezillon <hidden>
Date: 2015-07-20 15:33:56
Also in:
linux-arm-kernel, linux-leds, linux-pwm, linux-rockchip, lkml
Subsystem:
backlight class/subsystem, framebuffer layer, the rest · Maintainers:
Lee Jones, Daniel Thompson, Jingoo Han, Helge Deller, Linus Torvalds
The PWM period will be set when calling pwm_config. Remove this useless call to pwm_set_period, which might mess up with the initial PWM state once we have added proper support for PWM init state retrieval. Signed-off-by: Boris Brezillon <redacted> --- drivers/video/backlight/pwm_bl.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index ae498c1..71944f8 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c@@ -293,12 +293,14 @@ static int pwm_backlight_probe(struct platform_device *pdev) * period, parsed from the DT, in the PWM device. For the non-DT case, * set the period from platform data if it has not already been set * via the PWM lookup table. + * FIXME: This assignment should be dropped as soon as all the boards + * have moved to the PWM lookup table approach. The same goes for the + * pb->period field which should be replaced by + * pwm_get_default_period() calls. */ pb->period = pwm_get_default_period(pb->pwm); - if (!pb->period && (data->pwm_period_ns > 0)) { + if (!pb->period && (data->pwm_period_ns > 0)) pb->period = data->pwm_period_ns; - pwm_set_period(pb->pwm, data->pwm_period_ns); - } pb->lth_brightness = data->lth_brightness * (pb->period / pb->scale);
--
1.9.1