[PATCH 08/11] OMAPDSS: DISPC: do only y decimation on OMAP3

The current driver does both x and y decimation on OMAP3 DSS. Testing
shows that x decimation rarely works, leading to underflows.

The exact reason for this is unclear, as the underflows seem to happen
even with low pixel clock rates, and I would presume that if the DSS can
manage a display with 140MHz pixel clock, it could manage x decimation
with factor 2 with a low pixel clock (~30MHz).

So it is possible that there is a problem somewhere else, in memory
management, or DSS DMA, or similar. I have not found anything that would
help this.

So, to fix the downscaling scaling, this patch removes x decimation for
OMAP3. This will limit some of the more demanding downscaling scenarios,
but one could argue that using DSS to downscale such a large amount is
insane in the first place, as the produced image is rather bad quality.

Signed-off-by: Tomi Valkeinen <redacted>
---
 drivers/video/fbdev/omap2/dss/dispc.c | 13 ++-----------
 1 file changed, 2 insertions(+), 11 deletions(-)

diff --git a/drivers/video/fbdev/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 0bdb587cb48c..646d94a71a79 100644
--- a/drivers/video/fbdev/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c

@@ -2300,7 +2300,6 @@ static int dispc_ovl_calc_scaling_34xx(unsigned long pclk, unsigned long lclk,
 {
 	int error;
 	u16 in_width, in_height;
-	int min_factor = min(*decim_x, *decim_y);
 	const int maxsinglelinewidth  			dss_feat_get_param_max(FEAT_PARAM_LINEWIDTH);
 

@@ -2349,16 +2348,8 @@ again:
 			}
 		}
 
-		if (error) {
-			if (*decim_x = *decim_y) {
-				*decim_x = min_factor;
-				++*decim_y;
-			} else {
-				swap(*decim_x, *decim_y);
-				if (*decim_x < *decim_y)
-					++*decim_x;
-			}
-		}
+		if (error)
+			++*decim_y;
 	} while (*decim_x <= *x_predecim && *decim_y <= *y_predecim && error);
 
 	if (error) {

-- 
2.1.4