related to frame buffer rotation to 180 degree

Hello,

I using i/MX6Q processor with Linux Kernel 3.0.35 version with 3.5 inch 
RGB type ORTUSTECH LCD display.

I want to rotate my LCD screen to 180 degree from current position.
I tried out to pass digits by use of echo to fb0 and fbcon in 
/sys/class/graphics/fb0 and fbcon but still nothing happen, I can do 
mirror my display but not rotate.

I write full details, what I had done for rotation at below link, please 
refer it once for full details

https://community.freescale.com/thread/346492

Help me about this to solve this issue, it will benefit me a lot.

-- 
Thanks and Regards,

JAYMIN DABHI
Embedded Engineer

Delta Embedded Solutions Pvt. Ltd.
BAT House, 720/10 Navi Peth,
Plot-985, off LBS Road,
Pune - 411030.  India.

Tel: +91 (20) 2453 0811
www.deltaembedded.in

This email message is for the sole use of the intended recipient(s) and
may contain confidential and privileged information.Any unauthorized
review, use, disclosure or distribution is prohibited.If you are not
the intended recipient, please contact the sender by reply email and
destroy all copies of the original message.


DISCLAIMER
This email message including any attachments is for the sole use of the intended recipient(s) and may contain confidential and privileged information. 

7 more lines

On Fri, Mar 13, 2015 at 9:41 AM, Jaymin Dabhi
[off-list ref] wrote:

I using i/MX6Q processor with Linux Kernel 3.0.35 version with 3.5 inch RGB
type ORTUSTECH LCD display.

I want to rotate my LCD screen to 180 degree from current position.
I tried out to pass digits by use of echo to fb0 and fbcon in
/sys/class/graphics/fb0 and fbcon but still nothing happen, I can do mirror
my display but not rotate.

You do have FRAMEBUFFER_CONSOLE_ROTATION=y in your .config?

Note that rotation is only done for text console output.
Graphical applications have to take care of rotation theirselves.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds