Re: [PATCH v3 2/2] fbcon: expose cursor blink interval via sysfs

From
Pavel Machek <hidden>
Date
2015-02-25 09:50:01
Also in
lkml
Reply to
Scot Doyle, 2015-01-26
On Mon 2015-01-26 20:41:53, Scot Doyle wrote:
The fbcon cursor, when set to blink, is hardcoded to toggle display state
five times per second. Expose this setting via
/sys/class/graphics/fbcon/cursor_blink_ms

Values written to the interface set the approximate time interval in
milliseconds between cursor toggles, from 1 to 32767. Since the interval
is stored internally as a number of jiffies, the millisecond value read
from the interface may not exactly match the entered value.

An outstanding blink timer is reset after a new value is entered.

If the cursor blink is disabled, either via the 'cursor_blink' boolean
setting or some other mechanism, the 'cursor_blink_ms' setting may still
be modified. The new value will be used if the blink is reactivated.

Signed-off-by: Scot Doyle <redacted>
Normally, this would be set by ansi escape sequences, no? We can hide
cursor using them, set its appearance.. makes sense to change timing
value there, too....
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
Thread (46 messages) 46 messages, 12 authors, last reply 2015-07-21
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help