S Sean Paul #
Message details and related content
This patch adds a supply regulator to the lp855x platform data to facilitate
powering on/off the 3V rail attached to the controller.
Cc: Stéphane Marchesin <redacted>
Cc: Aaron Durbin <redacted>
Acked-by: Milo Kim <redacted>
Signed-off-by: Sean Paul <redacted>
---
Changes in v2:
- Add NULL check in lp855x_remove
.../devicetree/bindings/video/backlight/lp855x.txt | 2 ++
drivers/video/backlight/lp855x_bl.c | 18 ++++++++++++++++++
include/linux/platform_data/lp855x.h | 2 ++
3 files changed, 22 insertions(+)
diff --git a/Documentation/devicetree/bindings/video/backlight/lp855x.txt b/Documentation/devicetree/bindings/video/backlight/lp855x.txt
index 96e83a5..0a3ecbc 100644
--- a/Documentation/devicetree/bindings/video/backlight/lp855x.txt
+++ b/Documentation/devicetree/bindings/video/backlight/lp855x.txt@@ -12,6 +12,7 @@ Optional properties: - pwm-period: PWM period value. Set only PWM input mode used (u32) - rom-addr: Register address of ROM area to be updated (u8) - rom-val: Register value to be updated (u8) + - power-supply: Regulator which controls the 3V rail Example:
@@ -56,6 +57,7 @@ Example: backlight@2c { compatible = "ti,lp8557"; reg = <0x2c>; + power-supply = <&backlight_vdd>; dev-ctrl = /bits/ 8 <0x41>; init-brt = /bits/ 8 <0x0a>;
diff --git a/drivers/video/backlight/lp855x_bl.c b/drivers/video/backlight/lp855x_bl.c
index 257b3ba..a26d3bb 100644
--- a/drivers/video/backlight/lp855x_bl.c
+++ b/drivers/video/backlight/lp855x_bl.c@@ -17,6 +17,7 @@ #include <linux/of.h> #include <linux/platform_data/lp855x.h> #include <linux/pwm.h> +#include <linux/regulator/consumer.h> /* LP8550/1/2/3/6 Registers */ #define LP855X_BRIGHTNESS_CTRL 0x00
@@ -383,6 +384,13 @@ static int lp855x_parse_dt(struct lp855x *lp) pdata->rom_data = &rom[0]; } + pdata->supply = devm_regulator_get(dev, "power"); + if (IS_ERR(pdata->supply)) { + if (PTR_ERR(pdata->supply) = -EPROBE_DEFER) + return -EPROBE_DEFER; + pdata->supply = NULL; + } + lp->pdata = pdata; return 0;
@@ -423,6 +431,14 @@ static int lp855x_probe(struct i2c_client *cl, const struct i2c_device_id *id) else lp->mode = REGISTER_BASED; + if (lp->pdata->supply) { + ret = regulator_enable(lp->pdata->supply); + if (ret < 0) { + dev_err(&cl->dev, "failed to enable supply: %d\n", ret); + return ret; + } + } + i2c_set_clientdata(cl, lp); ret = lp855x_configure(lp);
@@ -454,6 +470,8 @@ static int lp855x_remove(struct i2c_client *cl) lp->bl->props.brightness = 0; backlight_update_status(lp->bl); + if (lp->pdata->supply) + regulator_disable(lp->pdata->supply); sysfs_remove_group(&lp->dev->kobj, &lp855x_attr_group); return 0;
diff --git a/include/linux/platform_data/lp855x.h b/include/linux/platform_data/lp855x.h
index 1b2ba24..9c7fd1e 100644
--- a/include/linux/platform_data/lp855x.h
+++ b/include/linux/platform_data/lp855x.h@@ -136,6 +136,7 @@ struct lp855x_rom_data { Only valid when mode is PWM_BASED. * @size_program : total size of lp855x_rom_data * @rom_data : list of new eeprom/eprom registers + * @supply : regulator that supplies 3V input */ struct lp855x_platform_data { const char *name;
@@ -144,6 +145,7 @@ struct lp855x_platform_data { unsigned int period_ns; int size_program; struct lp855x_rom_data *rom_data; + struct regulator *supply; }; #endif
--
2.2.0.rc0.207.ga3a616c