[PATCH v3 0/3] omapdss: Add video output support for gta04

STALE4272d

Revision v3 of 2 in this series.

6 messages, 2 authors, 2014-12-03 · open the first message on its own page

[PATCH v3 0/3] omapdss: Add video output support for gta04

From: Marek Belisko <hidden>
Date: 2014-11-30 13:08:31

changes from v2:
- rename amplifier-opa362.c to encoder-opa362
- drop inversion handlign from driver
- add ti,invert-polarity to venc node

I also drop devconf1 handling patches because discussion how to
properly implement is not yet finished and this part is independent
from video driver.

changes from v1:
- fix opa362 compilation error
- fix opa362 DT documentation
- move devconf1 definition to omap3.dtsi

Marek Belisko (3):
  video: omapdss: Add opa362 driver
  Documentation: DT: Add documentation for ti,opa362 bindings
  arm: dts: omap3-gta04: Add handling for tv output

 .../devicetree/bindings/video/ti,opa362.txt        |  38 +++
 arch/arm/boot/dts/omap3-gta04.dtsi                 |  49 ++++
 drivers/video/fbdev/omap2/displays-new/Kconfig     |   6 +
 drivers/video/fbdev/omap2/displays-new/Makefile    |   1 +
 .../fbdev/omap2/displays-new/encoder-opa362.c      | 283 +++++++++++++++++++++
 5 files changed, 377 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
 create mode 100644 drivers/video/fbdev/omap2/displays-new/encoder-opa362.c

-- 
1.9.1

[PATCH v3 2/3] Documentation: DT: Add documentation for ti,opa362 bindings

From: Marek Belisko <hidden>
Date: 2014-11-30 13:08:34

Signed-off-by: Marek Belisko <redacted>
---
 .../devicetree/bindings/video/ti,opa362.txt        | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 0000000..4747ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- gpio: enable/disable output gpio
+
+Required node:
+- Video port 0 for opa362 input
+- Video port 1 for opa362 output
+
+Example:
+
+tv_amp: opa362 {
+	compatible = "ti,opa362";
+	gpios = <&gpio1 23 0>;  /* GPIO to enable video out amplifier */
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			opa_in: endpoint@0 {
+				remote-endpoint = <&venc_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			opa_out: endpoint@0 {
+				remote-endpoint = <&tv_connector_in>;
+			};
+		};
+	};
+};
+
+
+
-- 
1.9.1

[PATCH v3 3/3] arm: dts: omap3-gta04: Add handling for tv output

From: Marek Belisko <hidden>
Date: 2014-11-30 13:08:49

Add handling for gta04 tv out chain:
venc -> opa362 -> svideo

Use invert-polarity in venc node because opa362
is doing polarity inversion also.

Signed-off-by: Marek Belisko <redacted>
---
 arch/arm/boot/dts/omap3-gta04.dtsi | 49 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index fd34f91..e9f221d 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -83,6 +83,41 @@
 		compatible = "usb-nop-xceiv";
 		reset-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
 	};
+
+	tv0: connector@1 {
+		compatible = "svideo-connector";
+		label = "tv";
+
+		port {
+			tv_connector_in: endpoint {
+				remote-endpoint = <&opa_out>;
+			};
+		};
+	};
+
+	tv_amp: opa362 {
+		compatible = "ti,opa362";
+		gpios = <&gpio1 23 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				opa_in: endpoint@0 {
+					remote-endpoint = <&venc_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				opa_out: endpoint@0 {
+					remote-endpoint = <&tv_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &omap3_pmx_core {
@@ -396,6 +431,20 @@
 	};
 };
 
+&venc {
+	status = "okay";
+
+	vdda-supply = <&vdac>;
+
+	port {
+		venc_out: endpoint {
+			remote-endpoint = <&opa_in>;
+			ti,channels = <2>;
+			ti,invert-polarity;
+		};
+	};
+};
+
 &gpmc {
 	ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
 
-- 
1.9.1

[PATCH v3 1/3] video: omapdss: Add opa362 driver

From: Marek Belisko <hidden>
Date: 2014-11-30 13:09:20

opa362 is amplifier for video and can be connected to the tvout pads
of the OMAP3. It has one gpio control for enable/disable of the output
(high impedance).

Signed-off-by: H. Nikolaus Schaller <redacted>
Signed-off-by: Marek Belisko <redacted>
---
 drivers/video/fbdev/omap2/displays-new/Kconfig     |   6 +
 drivers/video/fbdev/omap2/displays-new/Makefile    |   1 +
 .../fbdev/omap2/displays-new/encoder-opa362.c      | 283 +++++++++++++++++++++
 3 files changed, 290 insertions(+)
 create mode 100644 drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
diff --git a/drivers/video/fbdev/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
index e6cfc38..5747101 100644
--- a/drivers/video/fbdev/omap2/displays-new/Kconfig
+++ b/drivers/video/fbdev/omap2/displays-new/Kconfig
@@ -1,6 +1,12 @@
 menu "OMAP Display Device Drivers (new device model)"
         depends on OMAP2_DSS
 
+config DISPLAY_ENCODER_OPA362
+	tristate "OPA362 external analog amplifier"
+	help
+	  Driver for OPA362 external analog TV amplifier controlled
+	  through a GPIO.
+
 config DISPLAY_ENCODER_TFP410
         tristate "TFP410 DPI to DVI Encoder"
 	help
diff --git a/drivers/video/fbdev/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
index 0323a8a..9aa176b 100644
--- a/drivers/video/fbdev/omap2/displays-new/Makefile
+++ b/drivers/video/fbdev/omap2/displays-new/Makefile
@@ -1,3 +1,4 @@
+obj-$(CONFIG_DISPLAY_ENCODER_OPA362) += encoder-opa362.o
 obj-$(CONFIG_DISPLAY_ENCODER_TFP410) += encoder-tfp410.o
 obj-$(CONFIG_DISPLAY_ENCODER_TPD12S015) += encoder-tpd12s015.o
 obj-$(CONFIG_DISPLAY_CONNECTOR_DVI) += connector-dvi.o
diff --git a/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
new file mode 100644
index 0000000..d2cc649
--- /dev/null
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-opa362.c
@@ -0,0 +1,283 @@
+/*
+ * OPA362 analog video amplifier with output/power control
+ *
+ * Copyright (C) 2014 Golden Delicious Computers
+ * Author: H. Nikolaus Schaller <hns@goldelico.com>
+ *
+ * based on encoder-tfp410
+ *
+ * Copyright (C) 2013 Texas Instruments
+ * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of_gpio.h>
+
+#include <video/omapdss.h>
+#include <video/omap-panel-data.h>
+
+struct panel_drv_data {
+	struct omap_dss_device dssdev;
+	struct omap_dss_device *in;
+
+	struct gpio_desc *enable_gpio;
+
+	struct omap_video_timings timings;
+};
+
+#define to_panel_data(x) container_of(x, struct panel_drv_data, dssdev)
+
+static int opa362_connect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "connect\n");
+
+	if (omapdss_device_is_connected(dssdev))
+		return -EBUSY;
+
+	r = in->ops.atv->connect(in, dssdev);
+	if (r)
+		return r;
+
+	dst->src = dssdev;
+	dssdev->dst = dst;
+
+	return 0;
+}
+
+static void opa362_disconnect(struct omap_dss_device *dssdev,
+		struct omap_dss_device *dst)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disconnect\n");
+
+	WARN_ON(!omapdss_device_is_connected(dssdev));
+	if (!omapdss_device_is_connected(dssdev))
+		return;
+
+	WARN_ON(dst != dssdev->dst);
+	if (dst != dssdev->dst)
+		return;
+
+	dst->src = NULL;
+	dssdev->dst = NULL;
+
+	in->ops.atv->disconnect(in, &ddata->dssdev);
+}
+
+static int opa362_enable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+	int r;
+
+	dev_dbg(dssdev->dev, "enable\n");
+
+	if (!omapdss_device_is_connected(dssdev))
+		return -ENODEV;
+
+	if (omapdss_device_is_enabled(dssdev))
+		return 0;
+
+	in->ops.atv->set_timings(in, &ddata->timings);
+
+	r = in->ops.atv->enable(in);
+	if (r)
+		return r;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 1);
+
+	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
+
+	return 0;
+}
+
+static void opa362_disable(struct omap_dss_device *dssdev)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "disable\n");
+
+	if (!omapdss_device_is_enabled(dssdev))
+		return;
+
+	if (ddata->enable_gpio)
+		gpiod_set_value_cansleep(ddata->enable_gpio, 0);
+
+	in->ops.atv->disable(in);
+
+	dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
+}
+
+static void opa362_set_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "set_timings\n");
+
+	ddata->timings = *timings;
+	dssdev->panel.timings = *timings;
+
+	in->ops.atv->set_timings(in, timings);
+}
+
+static void opa362_get_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+
+	dev_dbg(dssdev->dev, "get_timings\n");
+
+	*timings = ddata->timings;
+}
+
+static int opa362_check_timings(struct omap_dss_device *dssdev,
+		struct omap_video_timings *timings)
+{
+	struct panel_drv_data *ddata = to_panel_data(dssdev);
+	struct omap_dss_device *in = ddata->in;
+
+	dev_dbg(dssdev->dev, "check_timings\n");
+
+	return in->ops.atv->check_timings(in, timings);
+}
+
+static void opa362_set_type(struct omap_dss_device *dssdev,
+		enum omap_dss_venc_type type)
+{
+	/* we can only drive a COMPOSITE output */
+	WARN_ON(type != OMAP_DSS_VENC_TYPE_COMPOSITE);
+
+}
+
+static const struct omapdss_atv_ops opa362_atv_ops = {
+	.connect	= opa362_connect,
+	.disconnect	= opa362_disconnect,
+
+	.enable		= opa362_enable,
+	.disable	= opa362_disable,
+
+	.check_timings	= opa362_check_timings,
+	.set_timings	= opa362_set_timings,
+	.get_timings	= opa362_get_timings,
+
+	.set_type	= opa362_set_type,
+};
+
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node = NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get(&pdev->dev, "enable");
+	if (IS_ERR(gpio)) {
+		if (PTR_ERR(gpio) != -ENOENT)
+			return PTR_ERR(gpio);
+	} else {
+		gpiod_direction_output(gpio, 0);
+	}
+
+	ddata->enable_gpio = gpio;
+
+	in = omapdss_of_find_source_for_first_ep(node);
+	if (IS_ERR(in)) {
+		dev_err(&pdev->dev, "failed to find video source\n");
+		return PTR_ERR(in);
+	}
+
+	ddata->in = in;
+
+	dssdev = &ddata->dssdev;
+	dssdev->ops.atv = &opa362_atv_ops;
+	dssdev->dev = &pdev->dev;
+	dssdev->type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->output_type = OMAP_DISPLAY_TYPE_VENC;
+	dssdev->owner = THIS_MODULE;
+
+	r = omapdss_register_output(dssdev);
+	if (r) {
+		dev_err(&pdev->dev, "Failed to register output\n");
+		goto err_reg;
+	}
+
+	return 0;
+err_reg:
+	omap_dss_put_device(ddata->in);
+	return r;
+}
+
+static int __exit opa362_remove(struct platform_device *pdev)
+{
+	struct panel_drv_data *ddata = platform_get_drvdata(pdev);
+	struct omap_dss_device *dssdev = &ddata->dssdev;
+	struct omap_dss_device *in = ddata->in;
+
+	omapdss_unregister_output(&ddata->dssdev);
+
+	WARN_ON(omapdss_device_is_enabled(dssdev));
+	if (omapdss_device_is_enabled(dssdev))
+		opa362_disable(dssdev);
+
+	WARN_ON(omapdss_device_is_connected(dssdev));
+	if (omapdss_device_is_connected(dssdev))
+		opa362_disconnect(dssdev, dssdev->dst);
+
+	omap_dss_put_device(in);
+
+	return 0;
+}
+
+static const struct of_device_id opa362_of_match[] = {
+	{ .compatible = "omapdss,ti,opa362", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, opa362_of_match);
+
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.owner	= THIS_MODULE,
+		.of_match_table = opa362_of_match,
+	},
+};
+
+module_platform_driver(opa362_driver);
+
+MODULE_AUTHOR("H. Nikolaus Schaller <hns@goldelico.com>");
+MODULE_DESCRIPTION("OPA362 analog video amplifier with output/power control");
+MODULE_LICENSE("GPL");
-- 
1.9.1

Re: [PATCH v3 1/3] video: omapdss: Add opa362 driver

From: Tomi Valkeinen <hidden>
Date: 2014-12-03 12:15:04

Hi,

On 30/11/14 15:07, Marek Belisko wrote:
+#include <video/omap-panel-data.h>
This should not be needed, as the driver is DT only.
+static int opa362_probe(struct platform_device *pdev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	struct panel_drv_data *ddata;
+	struct omap_dss_device *dssdev, *in;
+	struct gpio_desc *gpio;
+	int r;
+
+	dev_dbg(&pdev->dev, "probe\n");
+
+	if (node == NULL) {
+		dev_err(&pdev->dev, "Unable to find device tree\n");
+		return -EINVAL;
+	}
+
+	ddata = devm_kzalloc(&pdev->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ddata);
+
+	gpio = devm_gpiod_get(&pdev->dev, "enable");
+	if (IS_ERR(gpio)) {
+		if (PTR_ERR(gpio) != -ENOENT)
+			return PTR_ERR(gpio);
+	} else {
+		gpiod_direction_output(gpio, 0);
+	}
+
+	ddata->enable_gpio = gpio;
The 'gpio' may be non-null here, if PTR_ERR(gpio) == -ENOENT. You should
set 'gpio' to NULL in the IS_ERR(gpio) path, as you later check the gpio
for NULL.
+static struct platform_driver opa362_driver = {
+	.probe	= opa362_probe,
+	.remove	= __exit_p(opa362_remove),
+	.driver	= {
+		.name	= "amplifier-opa362",
+		.owner	= THIS_MODULE,
+		.of_match_table = opa362_of_match,
+	},
Here you should add:

.suppress_bind_attrs = true,

so that the device/driver cannot be unbound via sysfs, as that's not
supported at the moment.

 Tomi

Re: [PATCH v3 2/3] Documentation: DT: Add documentation for ti,opa362 bindings

From: Tomi Valkeinen <hidden>
Date: 2014-12-03 12:19:24

On 30/11/14 15:07, Marek Belisko wrote:
quoted hunk
Signed-off-by: Marek Belisko <redacted>
---
 .../devicetree/bindings/video/ti,opa362.txt        | 38 ++++++++++++++++++++++
 1 file changed, 38 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 0000000..4747ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt
@@ -0,0 +1,38 @@
+OPA362 analog video amplifier
+
+Required properties:
+- compatible: "ti,opa362"
+- gpio: enable/disable output gpio
Either this or the example is wrong. If I'm not mistaken 'gpios' is the
correct form.

 Tomi

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help