[PATCH v2 2/5] Documentation: DT: Add documentation for ti,opa362 bindings
flat view
STALE4338d
From: Marek Belisko <hidden>
Date: 2014-11-12 22:13:13
Also in:
linux-arm-kernel, linux-devicetree, linux-omap, lkml
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Revision v2 of 2 in this series.
Revisions (2)
- v1 [diff vs current]
- v2 current
Signed-off-by: Marek Belisko <redacted> --- .../devicetree/bindings/video/ti,opa362.txt | 38 ++++++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ti,opa362.txt
diff --git a/Documentation/devicetree/bindings/video/ti,opa362.txt b/Documentation/devicetree/bindings/video/ti,opa362.txt
new file mode 100644
index 0000000..4747ef9
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,opa362.txt@@ -0,0 +1,38 @@ +OPA362 analog video amplifier + +Required properties: +- compatible: "ti,opa362" +- gpio: enable/disable output gpio + +Required node: +- Video port 0 for opa362 input +- Video port 1 for opa362 output + +Example: + +tv_amp: opa362 { + compatible = "ti,opa362"; + gpios = <&gpio1 23 0>; /* GPIO to enable video out amplifier */ + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + opa_in: endpoint@0 { + remote-endpoint = <&venc_out>; + }; + }; + + port@1 { + reg = <1>; + opa_out: endpoint@0 { + remote-endpoint = <&tv_connector_in>; + }; + }; + }; +}; + + +
--
1.9.1