add pm_runtime_last_busy_and_autosuspend() helper

Started by Vinod Koul on Sep 24, 2014 · 4 messages from 2 authors · Last reply Sep 25, 2014

Series

27 patches, 31 files

+97 −177

Subsystems (36)

Show 33 more

Maintainers (41)

Show 37 more
STALE4434d

open the first message on its own page

  1. [PATCH 27/27] video: fbdev: use pm_runtime_last_busy_and_autosuspend helper
    Related patches
Message details and related content
This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper

45 more lines

[PATCH 27/27] video: fbdev: use pm_runtime_last_busy_and_autosuspend helper

Message details and related content
Use the new pm_runtime_last_busy_and_autosuspend helper instead of open
coding the same code

Signed-off-by: Vinod Koul <redacted>
---
 drivers/video/fbdev/auo_k190x.c |    9 +++------
 1 files changed, 3 insertions(+), 6 deletions(-)
diff --git a/drivers/video/fbdev/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d..e12f513 100644
--- a/drivers/video/fbdev/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
@@ -354,8 +354,7 @@ static void auok190xfb_dpy_deferred_io(struct fb_info *info,
 		par->update_partial(par, y1, min((u16) (y1 + h), yres));
 
 out:
-	pm_runtime_mark_last_busy(info->device);
-	pm_runtime_put_autosuspend(info->device);
+	pm_runtime_last_busy_and_autosuspend(info->device);
 }
 
 /*
@@ -591,8 +590,7 @@ static int auok190x_read_temperature(struct auok190xfb_par *par)
 
 	mutex_unlock(&(par->io_lock));
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 
 	/* sanitize and split of half-degrees for now */
 	temp = ((data[0] & AUOK190X_VERSION_TEMP_MASK) >> 1);
@@ -630,8 +628,7 @@ static void auok190x_identify(struct auok190xfb_par *par)
 		par->panel_size_int, par->panel_size_float, par->panel_model,
 		par->epd_type, par->tcon_version, par->lut_version);
 
-	pm_runtime_mark_last_busy(dev);
-	pm_runtime_put_autosuspend(dev);
+	pm_runtime_last_busy_and_autosuspend(dev);
 }
 
 /*
-- 
1.7.0.4
Message details and related content
On Wednesday, September 24, 2014 09:44:50 PM Vinod Koul wrote:
This patch series adds a simple macro pm_runtime_last_busy_and_autosuspend()
which invokes pm_runtime_mark_last_busy() and pm_runtime_put_autosuspend()
sequentially. Then we do a tree wide update of current patterns which are
present. As evident from log below this pattern is frequent in the
kernel.

This series can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/slave-dma.git
topic/pm_runtime_last_busy_and_autosuspend

Fengguang's kbuild has tested it so it shouldn't break things for anyone.
Barring one patch (explictyly mentioned in its changelog) rest are simple
replacements.

If all are okay, this should be merged thru PM tree as it depends on macro
addition.

Subhransu S. Prusty (1):
  PM: Add helper pm_runtime_last_busy_and_autosuspend()

Vinod Koul (26):
  dmaengine: ste_dma: use pm_runtime_last_busy_and_autosuspend helper
  extcon: arizona: use pm_runtime_last_busy_and_autosuspend helper
  drm/i915: use pm_runtime_last_busy_and_autosuspend helper
  drm/nouveau: use pm_runtime_last_busy_and_autosuspend helper
  drm/radeon: use pm_runtime_last_busy_and_autosuspend helper
  vga_switcheroo: use pm_runtime_last_busy_and_autosuspend helper
  i2c: designware: use pm_runtime_last_busy_and_autosuspend helper
  i2c: omap: use pm_runtime_last_busy_and_autosuspend helper
  i2c: qup: use pm_runtime_last_busy_and_autosuspend helper
  mfd: ab8500-gpadc: use pm_runtime_last_busy_and_autosuspend helper
  mfd: arizona: use pm_runtime_last_busy_and_autosuspend helper
  mei: use pm_runtime_last_busy_and_autosuspend helper
  mmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: mmci: use pm_runtime_last_busy_and_autosuspend helper
  mmc: omap_hsmmc: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci-pxav3: use pm_runtime_last_busy_and_autosuspend helper
  mmc: sdhci: use pm_runtime_last_busy_and_autosuspend helper
  NFC: trf7970a: use pm_runtime_last_busy_and_autosuspend helper
  pm2301-charger: use pm_runtime_last_busy_and_autosuspend helper

40 more quoted lines

OK, I guess this is as good as it gets.

What tree would you like it go through?


-- 
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
Message details and related content
On Wed, Sep 24, 2014 at 10:28:07PM +0200, Rafael J. Wysocki wrote:
OK, I guess this is as good as it gets.

What tree would you like it go through?
Since rest of the patches are dependent upon 1st patch which should go thru
your tree, we should merge this thru your tree

Thanks
-- 
~Vinod
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help