[PATCH] drivers: video: fbdev: atmel_lcdfb.c: Add ability to inverted backlight PWM.
From: Michael Welling <hidden>
Date: 2014-07-04 02:26:45
Also in:
linux-devicetree, lkml
Subsystem:
framebuffer layer, microchip lcdfb driver, open firmware and flattened device tree bindings, the rest · Maintainers:
Helge Deller, Nicolas Ferre, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
The code has a variable to change the polarity of the PWM backlight control but it was not being initialized. This patch adds a devicetree entry to set the variable if required. Signed-off-by: Michael Welling <redacted> --- .../devicetree/bindings/video/atmel,lcdc.txt | 1 + drivers/video/fbdev/atmel_lcdfb.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt
index 1ec175e..b75af94 100644
--- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt
+++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt@@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper): Optional properties (as per of_videomode_helper): - atmel,lcdcon-backlight: enable backlight + - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed)
diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index d36e830..92640d4 100644
--- a/drivers/video/fbdev/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c@@ -290,7 +290,7 @@ static void init_contrast(struct atmel_lcdfb_info *sinfo) /* contrast pwm can be 'inverted' */ if (pdata->lcdcon_pol_negative) - contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE); + contrast_ctr &= ~(ATMEL_LCDC_POL_POSITIVE); /* have some default contrast/backlight settings */ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, contrast_ctr);
@@ -1097,6 +1097,7 @@ static int atmel_lcdfb_of_init(struct atmel_lcdfb_info *sinfo) pdata->lcd_wiring_mode = ret; pdata->lcdcon_is_backlight = of_property_read_bool(display_np, "atmel,lcdcon-backlight"); + pdata->lcdcon_pol_negative = of_property_read_bool(display_np, "atmel,lcdcon-backlight-inverted"); timings = of_get_display_timings(display_np); if (!timings) {
--
1.7.9.5