[PATCH 17/19] ARM: omap2plus_defconfig: Build DSS HDMI support for OMAP4 in kernel
STALE4517d
From: Jyri Sarha <hidden>
Date: 2014-05-12 09:12:28
Also in:
alsa-devel, linux-devicetree, linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
Revision v1 of 4 in this series.
Revisions (4)
- v1 current
- v6 [diff vs current]
- v7 [diff vs current]
- v7 [diff vs current]
This patch is here only as an example on how to enable HDMI video for Panda board. In addition to this patch omapdss.def_disp=hdmi parameter should be added to kernel command line in order to enable HDMI video. Signed-off-by: Jyri Sarha <redacted> --- arch/arm/configs/omap2plus_defconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index a966795..35c42aa 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig@@ -187,14 +187,14 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y -CONFIG_OMAP2_DSS=m +CONFIG_OMAP2_DSS=y CONFIG_OMAP2_DSS_SDI=y CONFIG_OMAP2_DSS_DSI=y -CONFIG_FB_OMAP2=m +CONFIG_FB_OMAP2=y CONFIG_DISPLAY_ENCODER_TFP410=m CONFIG_DISPLAY_ENCODER_TPD12S015=m -CONFIG_DISPLAY_CONNECTOR_DVI=m -CONFIG_DISPLAY_CONNECTOR_HDMI=m +CONFIG_DISPLAY_CONNECTOR_DVI=y +CONFIG_DISPLAY_CONNECTOR_HDMI=y CONFIG_DISPLAY_PANEL_DPI=m CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y
--
1.7.9.5