Re: [PATCH 3/4] OMAPDSS: panel-sharp-ls037v7dw01: add device tree support

* Tomi Valkeinen [off-list ref] [140509 01:31]:

On 09/05/14 02:33, Tony Lindgren wrote:

quoted

* Tony Lindgren [off-list ref] [140507 11:00]:

quoted

* Tomi Valkeinen [off-list ref] [140507 09:03]:

quoted

On 07/05/14 18:03, Tony Lindgren wrote:

quoted

BTW, I'm also personally fine with all five gpios showing in a single
gpios property, I'm not too exited about naming anything in DT..

I don't have a strong opinion here. I don't have much experience with
DT, especially with making bindings compatible with other ones.

I'd just forget the simple-panel, and have single gpio array.

Well if it's a don't care flag for both of us, let's try to use
the existing standard for simple-panel.txt and add mode-gpios
property. I'll post a patch for that.

Here's an updated version using enable-gpios, reset-gpios and
mode-gpios. So it follows simple-panel.txt and adds mode-gpios
that's currently specific to this panel only.

Also updated for -EPROBE_DEFER handling, tested that by changing
one of the GPIOs to be a twl4030 GPIO.

To speed things up a bit, I made the changes I suggested. Compile tested
only.

OK thanks did not get the penguin with it so need to look at it a bit
more.

Regards,

Tony