video: clps711x: Add new Cirrus Logic CLPS711X framebuffer driver

Started by Alexander Shiyan on May 24, 2014

Subsystems (2)

Maintainers (2)

DORMANTno replies

open the first message on its own page

Message details and related content
This adds support for the framebuffer available in the Cirrus
Logic CLPS711X CPUs.
FB features:
- 1-2-4 bits per pixel.
- Programmable panel size to a maximum of 1024x256 at 4 bps.
- Relocatible Frame Buffer (SRAM or SDRAM).
- Programmable refresh rates.
- 16 gray scale values.
This new driver is designed to usage with devicetree only.
The driver have been tested with custom board equipped
Cirrus Logic EP7312.

Signed-off-by: Alexander Shiyan <redacted>
---
 drivers/video/fbdev/Kconfig       |  15 ++
 drivers/video/fbdev/Makefile      |   1 +
 drivers/video/fbdev/clps711x-fb.c | 393 ++++++++++++++++++++++++++++++++++++++
 3 files changed, 409 insertions(+)
 create mode 100644 drivers/video/fbdev/clps711x-fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 59c98bf..c97b059 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -304,6 +304,7 @@ config FB_ACORN
 config FB_CLPS711X
 	bool "CLPS711X LCD support"
 	depends on (FB = y) && ARM && ARCH_CLPS711X
+	depends on !ARCH_MULTIPLATFORM
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -311,6 +312,20 @@ config FB_CLPS711X
 	  Say Y to enable the Framebuffer driver for the CLPS7111 and
 	  EP7212 processors.
 
+config FB_CLPS711XDT
+	tristate "CLPS711X LCD support"
+	depends on FB && (ARCH_CLPS711X || COMPILE_TEST)
+	select BACKLIGHT_LCD_SUPPORT
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select LCD_CLASS_DEVICE
+	select VIDEOMODE_HELPERS
+	help
+	  Say Y to enable the Framebuffer driver for the Cirrus Logic
+	  CLPS711X CPUs.
+
 config FB_SA1100
 	bool "SA-1100 LCD support"
 	depends on (FB = y) && ARM && ARCH_SA1100
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
index 0284f2a..102bded 100644
--- a/drivers/video/fbdev/Makefile
+++ b/drivers/video/fbdev/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
 obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
 obj-$(CONFIG_FB_ARC)              += arcfb.o
 obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
+obj-$(CONFIG_FB_CLPS711XDT)	  += clps711x-fb.o
 obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
 obj-$(CONFIG_FB_GRVGA)            += grvga.o
 obj-$(CONFIG_FB_PM2)              += pm2fb.o
diff --git a/drivers/video/fbdev/clps711x-fb.c b/drivers/video/fbdev/clps711x-fb.c
new file mode 100644
index 0000000..8513c06
--- /dev/null
+++ b/drivers/video/fbdev/clps711x-fb.c
@@ -0,0 +1,393 @@
+/*
+ * Cirrus Logic CLPS711X FB driver
+ *
+ * Copyright (C) 2014 Alexander Shiyan <shc_work@mail.ru>
+ * Based on driver by Russell King <rmk@arm.linux.org.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/fb.h>
+#include <linux/io.h>
+#include <linux/lcd.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/clps711x.h>
+#include <linux/regulator/consumer.h>
+#include <video/of_display_timing.h>
+
+#define CLPS711X_FB_NAME	"clps711x-fb"
+#define CLPS711X_FB_BPP_MAX	(4)
+
+/* Registers relative to LCDCON */
+#define CLPS711X_LCDCON		(0x0000)
+# define LCDCON_GSEN		BIT(30)
+# define LCDCON_GSMD		BIT(31)
+#define CLPS711X_PALLSW		(0x0280)
+#define CLPS711X_PALMSW		(0x02c0)
+#define CLPS711X_FBADDR		(0x0d40)
+
+struct clps711x_fb_info {
+	struct clk		*clk;
+	void __iomem		*base;
+	struct regmap		*syscon;
+	resource_size_t		buffsize;
+	struct fb_videomode	mode;
+	struct regulator	*lcd_pwr;
+	u32			ac_prescale;
+	bool			cmap_invert;
+};
+
+static int clps711x_fb_setcolreg(u_int regno, u_int red, u_int green,
+				 u_int blue, u_int transp, struct fb_info *info)
+{
+	struct clps711x_fb_info *cfb = info->par;
+	u32 level, mask, shift;
+
+	if (regno >= BIT(info->var.bits_per_pixel))
+		return -EINVAL;
+
+	shift = 4 * (regno & 7);
+	mask  = 0xf << shift;
+	/* gray = 0.30*R + 0.58*G + 0.11*B */
+	level = (((red * 77 + green * 151 + blue * 28) >> 20) << shift) & mask;
+	if (cfb->cmap_invert)
+		level = 0xf - level;
+
+	regno = (regno < 8) ? CLPS711X_PALLSW : CLPS711X_PALMSW;
+
+	writel((readl(cfb->base + regno) & ~mask) | level, cfb->base + regno);
+
+	return 0;
+}
+
+static int clps711x_fb_check_var(struct fb_var_screeninfo *var,
+				 struct fb_info *info)
+{
+	u32 val;
+
+	if (var->bits_per_pixel < 1 ||
+	    var->bits_per_pixel > CLPS711X_FB_BPP_MAX)
+		return -EINVAL;
+
+	if (!var->pixclock)
+		return -EINVAL;
+
+	val = DIV_ROUND_UP(var->xres, 16) - 1;
+	if (val < 0x01 || val > 0x3f)
+		return -EINVAL;
+
+	val = DIV_ROUND_UP(var->yres * var->xres * var->bits_per_pixel, 128);
+	val--;
+	if (val < 0x001 || val > 0x1fff)
+		return -EINVAL;
+
+	var->transp.msb_right	= 0;
+	var->transp.offset	= 0;
+	var->transp.length	= 0;
+	var->red.msb_right	= 0;
+	var->red.offset		= 0;
+	var->red.length		= var->bits_per_pixel;
+	var->green		= var->red;
+	var->blue		= var->red;
+	var->grayscale		= var->bits_per_pixel > 1;
+
+	return 0;
+}
+
+static int clps711x_fb_set_par(struct fb_info *info)
+{
+	struct clps711x_fb_info *cfb = info->par;
+	resource_size_t size;
+	u32 lcdcon, pps;
+
+	size = (info->var.xres * info->var.yres * info->var.bits_per_pixel) / 8;
+	if (size > cfb->buffsize)
+		return -EINVAL;
+
+	switch (info->var.bits_per_pixel) {
+	case 1:
+		info->fix.visual = FB_VISUAL_MONO01;
+		break;
+	case 2:
+	case 4:
+		info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	info->fix.line_length = info->var.xres * info->var.bits_per_pixel / 8;
+	info->fix.smem_len = size;
+
+	lcdcon = (info->var.xres * info->var.yres *
+		  info->var.bits_per_pixel) / 128 - 1;
+	lcdcon |= ((info->var.xres / 16) - 1) << 13;
+	lcdcon |= (cfb->ac_prescale & 0x1f) << 25;
+
+	pps = clk_get_rate(cfb->clk) / (PICOS2KHZ(info->var.pixclock) * 1000);
+	if (pps)
+		pps--;
+	lcdcon |= (pps & 0x3f) << 19;
+
+	if (info->var.bits_per_pixel = 4)
+		lcdcon |= LCDCON_GSMD;
+	if (info->var.bits_per_pixel >= 2)
+		lcdcon |= LCDCON_GSEN;
+
+	/* LCDCON must only be changed while the LCD is disabled */
+	regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0);
+	writel(lcdcon, cfb->base + CLPS711X_LCDCON);
+	regmap_update_bits(cfb->syscon, SYSCON_OFFSET,
+			   SYSCON1_LCDEN, SYSCON1_LCDEN);
+
+	return 0;
+}
+
+static int clps711x_fb_blank(int blank, struct fb_info *info)
+{
+	/* Return happy */
+	return 0;
+}
+
+static struct fb_ops clps711x_fb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_setcolreg	= clps711x_fb_setcolreg,
+	.fb_check_var	= clps711x_fb_check_var,
+	.fb_set_par	= clps711x_fb_set_par,
+	.fb_blank	= clps711x_fb_blank,
+	.fb_fillrect	= sys_fillrect,
+	.fb_copyarea	= sys_copyarea,
+	.fb_imageblit	= sys_imageblit,
+};
+
+static int clps711x_lcd_check_fb(struct lcd_device *lcddev, struct fb_info *fi)
+{
+	struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev);
+
+	return (!fi || fi->par = cfb) ? 1 : 0;
+}
+
+static int clps711x_lcd_get_power(struct lcd_device *lcddev)
+{
+	struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev);
+
+	if (!IS_ERR_OR_NULL(cfb->lcd_pwr))
+		return regulator_is_enabled(cfb->lcd_pwr);
+
+	return 1;
+}
+
+static int clps711x_lcd_set_power(struct lcd_device *lcddev, int power)
+{
+	struct clps711x_fb_info *cfb = dev_get_drvdata(&lcddev->dev);
+
+	if (!IS_ERR_OR_NULL(cfb->lcd_pwr)) {
+		if (power)
+			return regulator_enable(cfb->lcd_pwr);
+		else
+			return regulator_disable(cfb->lcd_pwr);
+	}
+
+	return 0;
+}
+
+static struct lcd_ops clps711x_lcd_ops = {
+	.check_fb	= clps711x_lcd_check_fb,
+	.get_power	= clps711x_lcd_get_power,
+	.set_power	= clps711x_lcd_set_power,
+};
+
+static int clps711x_fb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *disp, *np = dev->of_node;
+	struct clps711x_fb_info *cfb;
+	struct lcd_device *lcd;
+	struct fb_info *info;
+	struct resource *res;
+	int ret = -ENOENT;
+	u32 val;
+
+	if (fb_get_options(CLPS711X_FB_NAME, NULL))
+		return -ENODEV;
+
+	info = framebuffer_alloc(sizeof(*cfb), dev);
+	if (!info)
+		return -ENOMEM;
+
+	cfb = info->par;
+	platform_set_drvdata(pdev, info);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		goto out_fb_release;
+	cfb->base = devm_ioremap(dev, res->start, resource_size(res));
+	if (!cfb->base) {
+		ret = -ENOMEM;
+		goto out_fb_release;
+	}
+
+	info->fix.mmio_start = res->start;
+	info->fix.mmio_len = resource_size(res);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	info->screen_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(info->screen_base)) {
+		ret = PTR_ERR(info->screen_base);
+		goto out_fb_release;
+	}
+
+	/* Physical address should be aligned to 256 MiB */
+	if (res->start & 0x0fffffff) {
+		ret = -EINVAL;
+		goto out_fb_release;
+	}
+
+	info->apertures = alloc_apertures(1);
+	if (!info->apertures) {
+		ret = -ENOMEM;
+		goto out_fb_release;
+	}
+
+	cfb->buffsize = resource_size(res);
+	info->fix.smem_start = res->start;
+	info->apertures->ranges[0].base = info->fix.smem_start;
+	info->apertures->ranges[0].size = cfb->buffsize;
+
+	cfb->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(cfb->clk)) {
+		ret = PTR_ERR(cfb->clk);
+		goto out_fb_release;
+	}
+
+	cfb->syscon +		syscon_regmap_lookup_by_compatible("cirrus,clps711x-syscon1");
+	if (IS_ERR(cfb->syscon)) {
+		ret = PTR_ERR(cfb->syscon);
+		goto out_fb_release;
+	}
+
+	disp = of_parse_phandle(np, "display", 0);
+	if (!disp) {
+		dev_err(&pdev->dev, "No display defined\n");
+		ret = -ENODATA;
+		goto out_fb_release;
+	}
+
+	ret = of_get_fb_videomode(disp, &cfb->mode, OF_USE_NATIVE_MODE);
+	if (ret)
+		goto out_fb_release;
+
+	of_property_read_u32(disp, "ac-prescale", &cfb->ac_prescale);
+	cfb->cmap_invert = of_property_read_bool(disp, "cmap-invert");
+
+	ret = of_property_read_u32(disp, "bits-per-pixel",
+				   &info->var.bits_per_pixel);
+	if (ret)
+		goto out_fb_release;
+
+	/* Force disable LCD on any mismatch */
+	if (info->fix.smem_start != (readb(cfb->base + CLPS711X_FBADDR) << 28))
+		regmap_update_bits(cfb->syscon, SYSCON_OFFSET,
+				   SYSCON1_LCDEN, 0);
+
+	ret = regmap_read(cfb->syscon, SYSCON_OFFSET, &val);
+	if (ret)
+		goto out_fb_release;
+
+	if (!(val & SYSCON1_LCDEN)) {
+		/* Setup start FB address */
+		writeb(info->fix.smem_start >> 28, cfb->base + CLPS711X_FBADDR);
+		/* Clean FB memory */
+		memset(info->screen_base, 0, cfb->buffsize);
+	}
+
+	cfb->lcd_pwr = devm_regulator_get(dev, "lcd");
+	if (PTR_ERR(cfb->lcd_pwr) = -EPROBE_DEFER) {
+		ret = -EPROBE_DEFER;
+		goto out_fb_release;
+	}
+
+	info->fbops = &clps711x_fb_ops;
+	info->flags = FBINFO_DEFAULT;
+	info->var.activate = FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
+	info->var.height = -1;
+	info->var.width = -1;
+	info->var.vmode = FB_VMODE_NONINTERLACED;
+	info->fix.type = FB_TYPE_PACKED_PIXELS;
+	info->fix.accel = FB_ACCEL_NONE;
+	strlcpy(info->fix.id, CLPS711X_FB_NAME, sizeof(info->fix.id));
+	fb_videomode_to_var(&info->var, &cfb->mode);
+
+	ret = fb_alloc_cmap(&info->cmap, BIT(CLPS711X_FB_BPP_MAX), 0);
+	if (ret)
+		goto out_fb_release;
+
+	ret = fb_set_var(info, &info->var);
+	if (ret)
+		goto out_fb_dealloc_cmap;
+
+	ret = register_framebuffer(info);
+	if (ret)
+		goto out_fb_dealloc_cmap;
+
+	lcd = devm_lcd_device_register(dev, "clps711x-lcd", dev, cfb,
+				       &clps711x_lcd_ops);
+	if (!IS_ERR(lcd))
+		return 0;
+	
+	ret = PTR_ERR(lcd);
+	unregister_framebuffer(info);
+
+out_fb_dealloc_cmap:
+	regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0);
+	fb_dealloc_cmap(&info->cmap);
+
+out_fb_release:
+	framebuffer_release(info);
+
+	return ret;
+}
+
+static int clps711x_fb_remove(struct platform_device *pdev)
+{
+	struct fb_info *info = platform_get_drvdata(pdev);
+	struct clps711x_fb_info *cfb = info->par;
+
+	regmap_update_bits(cfb->syscon, SYSCON_OFFSET, SYSCON1_LCDEN, 0);
+
+	unregister_framebuffer(info);
+	fb_dealloc_cmap(&info->cmap);
+	framebuffer_release(info);
+
+	return 0;
+}
+
+static const struct of_device_id clps711x_fb_dt_ids[] = {
+	{ .compatible = "cirrus,clps711x-fb", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, clps711x_fb_dt_ids);
+
+static struct platform_driver clps711x_fb_driver = {
+	.driver	= {
+		.name		= CLPS711X_FB_NAME,
+		.owner		= THIS_MODULE,
+		.of_match_table	= clps711x_fb_dt_ids,
+	},
+	.probe	= clps711x_fb_probe,
+	.remove	= clps711x_fb_remove,
+};
+module_platform_driver(clps711x_fb_driver);
+
+MODULE_AUTHOR("Alexander Shiyan <shc_work@mail.ru>");
+MODULE_DESCRIPTION("Cirrus Logic CLPS711X FB driver");
+MODULE_LICENSE("GPL");
-- 
1.8.5.5
Keyboard shortcuts
hback out one level
jnext message in thread / next series-diff position
kprevious message in thread / previous series-diff position
ldrill in
Escclose help / fold thread tree
?toggle this help