[PATCH 05/16] ARM: at91: at91sam9rl: switch to generic PWM framework
From: Alexandre Belloni <hidden>
Date: 2014-03-19 13:18:56
Also in:
linux-arm-kernel, linux-leds, linux-pwm, lkml
Subsystem:
arm port, arm/microchip (at91) soc support, the rest · Maintainers:
Russell King, Nicolas Ferre, Alexandre Belloni, Claudiu Beznea, Linus Torvalds
Switch to the pwm/pwm-atmel driver instead of misc/atmel_pwm Signed-off-by: Alexandre Belloni <redacted> --- arch/arm/mach-at91/at91sam9rl.c | 1 + arch/arm/mach-at91/at91sam9rl_devices.c | 11 ++--------- 2 files changed, 3 insertions(+), 9 deletions(-)
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index 4d2006351d1d..bc035a9ff53c 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c@@ -199,6 +199,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk),
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index 9ccae034119c..a396d6d56ffe 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c@@ -797,9 +797,7 @@ static void __init at91_add_device_watchdog(void) {} * PWM * --------------------------------------------------------------------*/ -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - +#if IS_ENABLED(CONFIG_PWM_ATMEL) static struct resource pwm_resources[] = { [0] = { .start = AT91SAM9RL_BASE_PWMC,
@@ -814,11 +812,8 @@ static struct resource pwm_resources[] = { }; static struct platform_device at91sam9rl_pwm0_device = { - .name = "atmel_pwm", + .name = "at91sam9rl-pwm", .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, .resource = pwm_resources, .num_resources = ARRAY_SIZE(pwm_resources), };
@@ -837,8 +832,6 @@ void __init at91_add_device_pwm(u32 mask) if (mask & (1 << AT91_PWM3)) at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */ - pwm_mask = mask; - platform_device_register(&at91sam9rl_pwm0_device); } #else
--
1.8.3.2