Re: [PATCH 3/9] Doc/DT: Add DT binding documentation for DVI Connector
From: Russell King - ARM Linux <hidden>
Date: 2014-02-28 15:59:37
Also in:
dri-devel, linux-arm-kernel, linux-devicetree
On Fri, Feb 28, 2014 at 02:20:10PM +0200, Tomi Valkeinen wrote:
quoted hunk
Add DT binding documentation for DVI Connector. Signed-off-by: Tomi Valkeinen <redacted> Reviewed-by: Archit Taneja <redacted> --- .../devicetree/bindings/video/dvi-connector.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/dvi-connector.txtdiff --git a/Documentation/devicetree/bindings/video/dvi-connector.txt b/Documentation/devicetree/bindings/video/dvi-connector.txt new file mode 100644 index 000000000000..6a0aff866c78 --- /dev/null +++ b/Documentation/devicetree/bindings/video/dvi-connector.txt@@ -0,0 +1,26 @@ +DVI Connector +======= + +Required properties: +- compatible: "dvi-connector" + +Optional properties: +- label: a symbolic name for the connector +- i2c-bus: phandle to the i2c bus that is connected to DVI DDC + +Required nodes: +- Video port for DVI input + +Example +------- + +dvi0: connector@0 { + compatible = "dvi-connector"; + label = "dvi"; + + i2c-bus = <&i2c3>; + + dvi_connector_in: endpoint { + remote-endpoint = <&tfp410_out>; + }; +};
This looks far too simplistic. There are different classes of DVI connector - there is: DVI A - analogue only DVI D - digital only (single and dual link) DVI I - both (single and dual digital link) DRM at least makes a distinction between these three classes, and this disctinction is part of the user API. How would a display system know which kind of DVI connector is wired up on the board from this DT description? -- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it.