[PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder
STALE4603d
REVIEWED: 1 (0M)
From: Tomi Valkeinen <hidden>
Date: 2014-02-28 12:20:15
Also in:
dri-devel, linux-arm-kernel, linux-devicetree
Subsystem:
open firmware and flattened device tree bindings, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
1 review trailer.
Possibly related (same subject, not in this thread)
- 2014-02-13 · [PATCH 8/9] Doc/DT: Add DT binding documentation for TFP410 encoder · Tomi Valkeinen <hidden>
Add DT binding documentation for TFP410 encoder Signed-off-by: Tomi Valkeinen <redacted> Reviewed-by: Archit Taneja <redacted> --- .../devicetree/bindings/video/ti,tfp410.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/video/ti,tfp410.txt
diff --git a/Documentation/devicetree/bindings/video/ti,tfp410.txt b/Documentation/devicetree/bindings/video/ti,tfp410.txt
new file mode 100644
index 000000000000..6a5a04627584
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/ti,tfp410.txt@@ -0,0 +1,41 @@ +TFP410 DPI to DVI encoder +============+ +Required properties: +- compatible: "ti,tfp410" + +Optional properties: +- gpios: power-down gpio + +Required nodes: +- Video port 0 for DPI input +- Video port 1 for DVI output + +Example +------- + +tfp410: encoder@0 { + compatible = "ti,tfp410"; + gpios = <&twl_gpio 2 GPIO_ACTIVE_LOW>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + tfp410_in: endpoint@0 { + remote-endpoint = <&dpi_out>; + }; + }; + + port@1 { + reg = <1>; + + tfp410_out: endpoint@0 { + remote-endpoint = <&dvi_connector_in>; + }; + }; + }; +};
--
1.8.3.2